InGaN microring light-emitting diodes

The fabrication and performance of an InGaN light-emitting diode (LED) array based on a microring device geometry is reported. This design has been adopted in order to increase the surface area for light extraction and to minimize losses due to internal reflections and reabsorption. Electrical characteristics of these devices are similar to those of a conventional large-area LED, while the directed light extraction proves to be superior. In fact, these devices are found to be more efficient when operated at higher currents. This may be attributed to improved heat sinking due to the large surface area to volume ratio. The potential applications of these devices are also discussed.     

The fault-tolerant extension problem for complete multipartitenetworks

We develop a characterization for m-fault-tolerant extensions, and for optimal m-fault-tolerant extensions, of a complete multipartite graph. Our formulation shows that this problem is equivalent to an interesting combinatorial problem on the partitioning of integers. This characterization leads to a new procedure for constructing an optimal m-fault-tolerant extension of any complete multipartite graph, for any m⩾0. The proposed procedure is mainly useful when the size of the graph is relatively small, because the search time required is exponential. This exponential search, however, is not always necessary. We prove several necessary conditions that help us, in several cases, to identify some optimal m-fault-tolerant extensions without performing any search     

An adaptive descent method for non-linear viscoplasticity

A forming model based on a viscoplastic flow formulation is derived which includes the effects of small elastic strains. A significant feature of the formulation is its reliance on the dominant inelastic material characteristics in the formation of the stiffness matrix for large strain problems. The resultant non-linear system of equations is solved by an adaptive descent method which combines the rapid convergence of Newton's method near the solution with the robustness of a method of successive approximations. The use of the adaptive descent method effectively extends the viscoplastic flow formulations into the nearly rate-insensitive range of behaviours exhibited, for example, by metals at low temperature, where slow convergence of the non-linear solution algorithm has traditionally hampered their use.     

On the learning control of a robot manipulator

This paper derives a learning control law to achieve trajectory following for a robot manipulator. The controller consists of two parts, a computed torque servo for the rigid body terms that can be modelled and a learning law for the unmodelled dynamics. An advantage of this method is that bounds can be assigned to the position and velocity tracking errors.     

Bat-deafness in day-flying moths (Lepidoptera, Notodontidae, Dioptinae)

Assuming that bat-detection is the primary function of moth ears, the ears of moths that are no longer exposed to bats should be deaf to echolocation call frequencies. To test this, we compared the auditory threshold curves of 7 species of Venezuelan day-flying moths (Notodontidae: Dioptinae) to those of 12 sympatric species of nocturnal moths (Notodontidae: Dudusinae, Noctuidae and Arctiidae). Whereas 2 dioptines (Josia turgida, Zunacetha annulata) revealed normal ears, 2 (J. radians, J. gopala) had reduced hearing at bat-specific frequencies (20-80 kHz) and the remaining 3 (Thirmida discinota, Polypoetes circumfumata and Xenorma cytheris) revealed pronounced to complete levels of high-frequency deafness. Although the bat-deaf ears of dioptines could function in other purposes (e.g., social communication), the poor sensitivities of these species even at their best frequencies suggest that these moths represent a state of advanced auditory degeneration brought about by their diurnal life history. The phylogeny of the Notodontidae further suggests that this deafness is a derived (apomorphic) condition and not a retention of a primitive (pleisiomorphic), insensitive state.     

Perceptions of general practice among homosexual men

BACKGROUND: Primary care has an important role to play in the prevention and management of the human immunodeficiency virus (HIV). It has been suggested that homosexual men experience a variety of problems in relation to primary care. AIM: As part of a larger study, it was decided to examine the extent to which a sample of homosexually active men experienced difficulties in general practice and whether they consulted their general practitioner for problems related to HIV or the acquired immune deficiency syndrome (AIDS). METHOD: Homosexual men were recruited for interview in 1991-92 from a variety of sources including genitourinary clinics and homosexual organizations. RESULTS: Of 623 men registered with a general practitioner 44% had not informed their general practitioner of their sexual orientation and 44% of the 77 men who were HIV antibody positive, as confirmed by the study, had not informed their general practitioner of this fact. Men who viewed their practice as unsympathetic towards homosexual men were less likely to have informed their general practitioner of their sexual orientation or HIV status. The majority of men (87%) nevertheless viewed primary care as an appropriate source of HIV/AIDS advice. CONCLUSION: There is considerable scope for improvement in the acceptability of general practice to homosexual men.     

Physician judgment in clinical settings: methodological influences and cognitive performance

Understanding the quality of physicians' intuitive judgments is essential in determining the appropriate use of their judgments in medical decision-making (vis-a-vis analytical or actuarial approaches). As part of this process, the quality of physicians' predictions must be assessed because prediction is fundamental to common clinical tasks: determining diagnosis, prognosis, and therapy; establishing monitoring intervals; performing screening and preventive maneuvers. Critical evaluation of predictive capabilities requires an assessment of the components of the prediction process: the data available for prediction, the method used for prediction, and the accuracy of prediction. Although variation in and uncertainty about the underlying data elements are often acknowledged as a source of inaccurate predictions, prediction also can be confounded by both methodological and cognitive limitations. During the past two decades, numerous factors have been recognized that may bias test characteristics (sensitivity and specificity). These same factors may also produce bias in intuitive judgments. The use of cognitive processes to simplify judgment tasks (e.g., the availability and representativeness heuristics) and the presence of certain biases in the judgment process (e.g., ego, regret) may present obstacles to accurate estimation of probabilities by physicians. Limitations on the intuitive use of information (cognitive biases) have been demonstrated in both medical and nonmedical decision-making settings. Recent studies have led to a deepening understanding of the advantages and disadvantages of intuitive and analytical approaches to decision making. Here, many aspects of the basis for this understanding are reviewed.     

Thermal decomposition and micropore formation in PEK,PEEK and PES

At strain rates greater than about 10 the deformation of polymers is an adiabatic process which can lead to the generation of very high localized temperatures. These may be well in excess of the temperatures required for thermal decomposition of the polymer to occur. It is speculated that gaseous products arising from such decomposition may act as the source of microcavities and craze initiators. Experiments are described in which the thermal decomposition reaction parameters of polyetherketone, polyetheretherketone, and polysulphone are measured using differential scanning calorimetry and thermogravimetric analysis, and the decomposition products analysed by mass spectrometry. The results indicate that the proposed mechanism could act as a source of micropores with total pore volumes amounting to several per cent of the material volume.     

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

High-performance, two-dimensional arrays of parallel-addressed InGaN blue micro-light-emitting diodes (LEDs) with individual element diameters of 8, 12, and 20 /spl mu/m, respectively, and overall dimensions 490 /spl times/490 /spl mu/m, have been fabricated. In order to overcome the difficulty of interconnecting multiple device elements with sufficient step-height coverage for contact metallization, a novel scheme involving the etching of sloped-sidewalls has been developed. The devices have current-voltage (I-V) characteristics approaching those of broad-area reference LEDs fabricated from the same wafer, and give comparable (3-mW) light output in the forward direction to the reference LEDs, despite much lower active area. The external efficiencies of the micro-LED arrays improve as the dimensions of the individual elements are scaled down. This is attributed to scattering at the etched sidewalls of in-plane propagating photons into the forward direction.