Surface-modified alumina nanoparticles-filled aramid fiber-reinforced epoxy nanocomposites: preparation and mechanical properties

Iranian Polymer Journal - Surface of Al2O3 nanoparticles was modified with a silane coupling agent, and aramid fiber-reinforced epoxy nanocomposites were produced using these particles. Three...     

Subsurface Characterization at Ground Failure Sites in Adapazari, Turkey

Ground failure in Adapazari, Turkey during the 1999 Kocaeli earthquake was severe. Hundreds of structures settled, slid, tilted, and collapsed due in part to liquefaction and ground softening. Ground failure was more severe adjacent to and under buildings. The soils that led to severe building damage were generally low plasticity silts. In this paper, the results of a comprehensive investigation of the soils of Adapazari, which included cone penetration test (CPT) profiles followed by borings with standard penetration tests (SPTs) and soil index tests, are presented. The effects of subsurface conditions on the occurrence of ground failure and its resulting effect on building performance are explored through representative case histories. CPT- and SPT-based liquefaction triggering procedures adequately identified soils that liquefied if the clay-size criterion of the Chinese criteria was disregarded. The CPT was able to identify thin seams of loose liquefiable silt, and the SPT (with retrieved samples) allowed for reliable evaluation of the liquefaction susceptibility of fine-grained soils. A well-documented database of in situ and index testing is now available for incorporating in future CPT- and SPT-based liquefaction triggering correlations.     

Hydrolysis of titanium alkoxide and effects of hydrolytic polycondensation parameters

Titanium alkoxides hydrolyse vigorously with water producing polycondensates whose equivalent oxide content varies from 70% to over 90%. This variation reflects the average molecular size and the nature of the terminal bonds. Hydrolysis conditions also affect the molecular and particle morphologies modifying the crystallization and sintering behaviour of oxide materials derived from polycondensates. It is also possible to form clear polymer solutions under excess water hydrolysis with the addition of certain acids. Investigations show that there is a window in the acid concentration which provides long-term solution stability. The gels formed from these clear solutions shrink in their liquor under certain conditions and the introduction of hydrogen peroxide into the liquor (surrounding the gel) causes vigorous gel shrinkage.     

Induced-charge electro-osmosis of polymer-containing fluid around a metallic rod

Induced-charge electro-osmotic (ICEO) flow of polymer-containing electrolyte solution around a cylindrical gold-coated stainless steel rod under AC electric field is measured by micro-particle image velocimetry (micro-PIV) for the first time. The ICEO flows as functions of the amount of non-ionic PEG (polyethylene glycol), cationic PDADMA (polydiallyldimethylammonium chloride), and anionic PVSASS (polyvinylsulfonic acid sodium salt) polymers added into the salt solution, frequency, and strength of the AC electric field are measured. The ICEO flow of polymer-containing fluid around the rod is quadrupolar with four vortices and is proportional to the square of imposed electric field. The ICEO flow velocity exponentially decreases with an increased concentration of neutral PEG. Ionic polyelectrolytes significantly increase ICEO velocities due to the enriched net charge within the induced electric double layer arising from the electrostatic interaction between the polarized rod’s surface and the charged polyelectrolytes in ionic polymer solution. In addition, polymer concentration affects the dependence of the ICEO flow on the frequency of AC electric field.     

Features of a Scan and Clock Resource chip for providing access to board-level test functions

The architecture and some of the specific features of a Scan and Clock Resource (SCR) chip are described. This chip is currently being used in a high-end workstation product to provide access to the testability features of the individual chips and/or printed circuit boards. Using a board-level controller to gain access to the testability features of system components and interfacing the controller to a diagnostics processor (or external tester) is emerging as a common strategy for designing testable digital systems. Based upon experience gained from such an application, controller features that are deemed useful are discussed.This paper is an enhanced version of the author's earlier paper titled Towards a Standard Approach for Controlling Board-Level Test Functions, presented at the IEEE International Test Conference, ITC'90, Washington D.C., September 1990.     

Micro-PIV measurements of induced-charge electro-osmosis around a metal rod

A cylindrical gold-coated stainless steel rod was positioned at the center of a straight microchannel connecting two fluid reservoirs on either end. The microchannel was filled with 1 mM KCl containing 0.5 μm diameter carboxylate-modified spherical particles. Induced-charge electro-osmotic (ICEO) flow occurred around the metallic rod under a sinusoidal AC electric field applied using two platinum electrodes. The ICEO flows around the metallic rod were measured using micro particle image velocimetry (micro-PIV) technique as functions of the AC electric field strength and frequency. The present study provides experimental data about ICEO flow in the weakly nonlinear limit of thin double layers, in which, the charging dynamics of the double layer cannot be presented analytically. The measured ICEO flow pattern qualitatively agrees with the theoretical results obtained by Squires and Bazant (J Fluid Mech 509:217–252, 2004). Flow around the rod is quadrupolar, driving liquid towards the rod along the electric field and forcing it away from the rod in the direction perpendicular to the imposed electric field. The measured ICEO flow velocity is proportional to the square of the electric field strength, and depends on the applied AC frequency.     

Modelling of residual stresses in the shot peened material C-1020 by artificial neural network

This study consists of two cases: (i) The experimental analysis: Shot peening is a method to improve the resistance of metal pieces to fatigue by creating regions of residual stress. In this study, the residual stresses induced in steel specimen type C-1020 by applying various strengths of shot peening, are investigated using the electrochemical layer removal method. The best result is obtained using 0.26 mm A peening strength and the stress encountered in the shot peened material is ?276 MPa, while the maximum residual stress obtained is ?363 MPa at a peening strength of 0.43 mm A. (ii) The mathematical modelling analysis: The use of ANN has been proposed to determine the residual stresses based on various strengths of shot peening using results of experimental analysis. The back-propagation learning algorithm with two different variants and logistic sigmoid transfer function were used in the network. In order to train the neural network, limited experimental measurements were used as training and test data. The best fitting training data set was obtained with four neurons in the hidden layer, which made it possible to predict residual stress with accuracy at least as good as that of the experimental error, over the whole experimental range. After training, it was found the R² values are 0.996112 and 0.99896 for annealed before peening and shot peened only, respectively. Similarly, these values for testing data are 0.995858 and 0.999143, respectively. As seen from the results of mathematical modelling, the calculated residual stresses are obviously within acceptable uncertainties.     

Continuous Airborne Communication Relay Approach Using Unmanned Aerial Vehicles

As a result of unmanned aerial vehicles being widely used in different areas, studies about increasing the autonomous capabilities of unmanned aerial vehicles are gaining momentum. Today, unmanned aerial vehicle platforms are especially used in reconnaissance, surveillance and communications areas. In this study, in order to achieve continuous long-range communication relay infrastructure, artificial potential field based path planning of Unmanned Aerial Vehicles is discussed. A novel dynamic approach to relay-chain concept is proposed to maintain the communication between vehicles. Besides dynamically keeping vehicles in range and appropriate position to maintain communication relay, artificial potential field based path planning also provides collision avoidance system. The performance of the proposed system is measured by applying a simulation under the Matlab Simulink and Network Simulator environment. Artificial potential field based flight patterns are generated in Matlab, and performance of the communication between vehicles is measured in Network Simulation environment. Finally the simulation results show that an airborne communication relay can be established autonomously by using artificial potential filed based autonomous path planning approach. Continues state communication is provided by obtaining a resistant communication relay which depends on artificial potential field based positioning algorithm.