Ternary Blends of Renewable Fast Pyrolysis Bio-Oil,Advanced Bioethanol,and Marine Gasoil as Potential Marine Biofuel

An alternative for reducing emissions from marine fuel is to blend bio-oil from lignocellulose non-edible feedstocks to diesel fossil fuels. Phase diagrams of the ternary systems were built to represent the transition from heterogeneous regions to homogeneous regions. Four homogeneous blends of bio-oil of eucalyptus-bioethanol-marine gasoil were experimentally characterized with respect to the most important fuel parameters for marine engines: water content, flash point, low heating value, viscosity, and acidity. Blends with closer properties to marine gasoil replacement, lower costs, and environmental impacts should be tested for large engines.     

The Simulation of Impact Loads on Beam-type Structures using a Pseudo-dynamic Procedure

Abstract:  This study proposes an alternate method for the analysis of beams with solid cross-section or built as a framed structure and subjected to transverse impact loads from an external striker. The procedure used in the analysis is a combination of two essential tools using pseudo-dynamic techniques. The method reported here involves only one degree of freedom for the structure modelling and assumes an elastic contact between an external striker and the beam structure, which in reality does not happen. As only one degree of freedom is considered in the analysis, some important limitations are inherent to the method proposed here. Essentially, there is the difficulty of modelling the displacement field associated with the transient structure behaviour accurately, as a consequence of fast-rate impact loads. Another difficulty faced by the method refers to a local structure behaviour associated with contact loads. The present method can deal with large displacements in transversely loaded beams associated to a collapse mechanism having a simple geometry and defined with precision from a single parameter. This ensures reasonable accuracy in the evaluation of the strain energy absorbing capacity of transversely impacted beam structures using a single degree of freedom model in a pseudo-dynamic procedure.     

Static and pulsed pressures measured using electrically conducting rubbers

A method of measuring static and pulsed pressures using electrically conducting rubber sensors is proposed. The method is based on a change in the volume resistivity of a filled rubber under the action of external pressure. The pressure-induced change in resistance of the rubber sensor is proportional to the applied pressure and can be measured by a bridge circuit. Using this method, it is possible to evaluate the degree of homogeneity of the pressure distribution over a solid surface. This is achieved by distributing rubber sensors over the given surface.     

Determination of dissociation constants of loop diuretics in acetonitrile-water mixtures

The dissociation pK values of the representative loop diuretics furosemide, bumetanide and ethacrynic acid in 10, 30, 40, 50 and 70% (w/w) acetonitrile-water mixtures at 298.15 K were determined, according to the rules and procedures endorsed by IUPAC. The variation in pK values over the whole composition range studied can be explained by tacking into account the preferential solvation of ionizable substances in acetonitrile-water mixtures. With a view to determining the pK values of the loop diuretics studied in any of the binary solvent acetonitrile-water mixtures, correlations of pK values and different bulk properties of the solvent were examined, and the linear solvation energy relationships method, LSER, has been applied. The pK values were then correlated with the pi*, alpha and beta solvatochromic parameters of acetonitrile-water mixtures. The resulting equations allowed us to calculate pK values for the loop diuretics in any acetonitrile-water mixture up to 70% (w/w) acetonitrile.     

Adaptive detection of DS/CDMA signals in fading channels

This paper examines the behavior of the minimum mean-squared error (MMSE) receiver in frequency-nonselective-fading channels. It is noted that the MMSE receiver will often lose phase lock on the desired signal when the desired signal dips into a deep fade. A modification to the MMSE receiver is presented which is demonstrated to function quite nicely in flat-fading channels. Analytical results for the modified MMSE receiver are presented and found to agree very well with simulation results. These analytical results are then compared to the theoretical performance of the conventional (i.e., correlator) receiver in terms of both bit-error rate (BER) and capacity. As expected, the modified MMSE receiver was found to offer a substantial improvement in both BER and capacity. Finally, a simple empirically derived formula is given which will give a good approximation to the BER of the modified MMSE receiver in a Rayleigh-fading environment. This formula can also be used to determine the number of users a given system can support. It is noted that as E_b/N₀ grows, it is quite feasible to approach 100% channel utilization with the MMSE receiver, whereas a conventional receiver is typically limited to a utilization of 10%-20%     

A linear-operator formalism for the analysis of inhomogeneousbiisotropic planar waveguides

Using the theory of linear operators, guided electromagnetic wave propagation in inhomogeneous (nonreciprocal) biisotropic planar structures is analyzed in terms of a 2×2 matrix differential operator. Based on the concept of adjoint waveguide, a new biorthogonality relation for the guided hybrid modes is derived. For the special case of reciprocal biisotropic media or chiral media, the linear-operator formalism leads to a self-adjoint problem. As an application example, a general analysis of the radiation modes of a grounded chiroslabguide is also presented     

Stereological estimation of the total volume of MR visible brain lesions in patients with multiple sclerosis

Point counting represents a convenient and efficient technique for estimating the area of transects through multiple sclerosis (MS) lesions on magnetic resonance (MR) images obtained for sections through the brain. When sectioning has been performed according to the Cavalieri method, unbiased estimates of the total volume of MR-visible MS plaques can be obtained with a precision of 3–5% in 5–10 min.