Development of a new advanced process for manufacturing polyacetal resins. Part III. End-capping during polymerization for manufacturing acetal homopolymer and copolymer

Conventionally, acetal homopolymer or copolymer is obtained by the polymerization of formaldehyde or trioxane, following the end-capping using acetic anhydride or unzipping of the unstable polymer end fraction. First, Asahi Chemical developed a new process to obtain an end-capped polymer during polymerization of highly purified formaldehyde using acetic anhydride as the chain-transfer agent. Use of highly purified formaldehyde and endcapping during polymerization using acetic anhydride as a chain-transfer agent or an endcapping agent will provide a simple process for manufacturing acetal homopolymer. The polymerization mechanism was confirmed by infrared spectroscopy analysis and proton NMR analysis of the polymer obtained. Second, for the acetal copolymer, purified trioxane was copolymerized with ethylene oxide in the presence of methylal, which gave an endcapped polymer with high thermal stability. Two new intermediates from the initiation reaction of the copolymerization, 1,3,5,7-tetraoxacyclononane (TOCN) and 1,3,5,7,10-pentaoxacyclododecane (POCD), were isolated and a new initiation mechanism was proposed. © 1993 John Wiley & Sons, Inc.     

Synthesis and optical properties of the [2.2]paracyclophane-containing π-conjugated polymer with a diacetylene unit

Summary Novel through-spaceπ-conjugated polymer based on poly(p-henyleneethynylene)/poly(p-phenylenebutadiynylene) hybrids containing a [2.2]paracyclophane unit in the main chain was synthesized by copper-catalyzed alkyne coupling reaction. The structure of the polymer was supported by ¹H NMR and IR spectra. The obtained polymer was soluble in common organic solvents such as THF, CH₂C1₂, CHC1₃ and toluene. The number-average of molecular weight of the polymer was estimated to be 63000 by GPC. The polymer emitted a bluish green light in solution and in the solid state. Received:24 September 2002/Revised version: 19 November 2002/Accepted: 19 November 2002 Correspondence to Yoshiki Chujo     

A reconfigurable VLSI-based double-lens tracking camera

Watching and tracking an object while seeing a much wider view is one of advantages of the eye system. We proposed and developed a tracking camera system that mimics the eyes by using double-lens modules. In the system, a wide view is captured through the wide-lens module, while the target in it is tracked and magnified through the telescopic lens module. Electronic circuits for tracking control are implemented onto the reconfigurable VLSI or FPGA in order to embed the parallelism in the tracking algorithm into the hardware. A successfully developed FPGA-based prototype performs high-speed tracking at the video-rate. This work was present in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

Development of a robot assisted carotid blood flow measurement system

The ultrasound diagnosis of the carotid artery is one of the most common non-invasive methods to detect early stage heart and cerebrovascular diseases. However, the precision and repetitiveness of the probe positioning depend exclusively on the operator's skills and dexterity. For this purpose, we propose the development of a robot assisted system to enhance the accuracy and repetitiveness of the probe positioning to measure the wave intensity (WI) index. In this paper, the Waseda-Tokyo Women's Medical-Aloka Blood Flow Measurement Robot System No. 2 Refined (WTA-2R) is presented. The WTA-2R consists of a conventional ultrasound diagnosis system, a 6-DOFs parallel link slave manipulator, a 6-DOFs serial link passive arm, and a master device. Experiments were carried out to verify its effectiveness in terms of accuracy and required time to perform the task. From the experimental results, the positioning accuracy and reduction of required time were confirmed.     

Fabrication of 5.8‐in. OTFT‐driven flexible color AMOLED display using dual protection scheme for organic semiconductor patterning

Abstract— A 5.8‐in. wide‐QQVGA flexible color active‐matrix organic light‐emitting‐diode (AMOLED) display consisting of organic thin‐film transistors (OTFTs) and phosphorescent OLEDs was fabricated on a plastic film. To reduce the operating voltage of the OTFTs, Ta₂O₅ with a high dielectric constant was employed as a gate insulator. Pentacene was used for the semiconductor layer of the OTFTs. This layer was patterned by photolithography and dry‐etched using a dual protection layer of poly p‐xylylene and SiO₂ film. Uniform transistor performance was achieved in the OTFT backplane with QQVGA pixels. The RGB emission layers of the pixels were formed by vacuum deposition of phosphorescent small molecules. The resulting display could clearly show color moving images even when it was bent and operated at a low driving voltage (below 15 V).     

Reduction of system matrices of planar beam in ANCF by component mode synthesis method

A method of reducing the system matrices of a planar flexible beam described by an absolute nodal coordinate formulation (ANCF) is presented. In this method, we focus that the bending stiffness matrix expressed by adopting a continuum mechanics approach to the ANCF beam element is constant when the axial strain is not very large. This feature allows to apply the Craig–Bampton method to the equation of motion that is composed of the independent coordinates when the constraint forces are eliminated. Four numerical examples that compare the proposed method and the conventional ANCF are demonstrated to verify the performance and accuracy of the proposed method. From these examples, it is verified that the proposed method can describe the large deformation effects such as dynamic stiffening due to the centrifugal force, as well as the conventional ANCF does. The use of this method also reduces the computing time, while maintaining an acceptable degree of accuracy for the expression characteristics of the conventional ANCF when the modal truncation number is adequately employed. This reduction in CPU time particularly pronounced in the case of a large element number and small modal truncation number; the reduction can be verified not only in the case of small deformation but also in the case of a fair bit large deformation.     

Hydroboration polymerization of dicyano compounds

Summary Hydroboration polymerization of various ,-dicyanoalkanes with thexylborane produced the corresponding poly(cyclodiborazane)s, that consist of boron-nitrogen four-membered rings. The structures of the obtained polymers were confirmed by spectroscopic analyses such as ¹H-, ¹¹B-NMR and IR spectra. From the result of thermogravimetric analysis of the polymer prepared from adiponitrile and thexylborane, 12% of the inorganic materials remained after heating at 900°C. *** DIRECT SUPPORT *** AEB03051 00003     

SiO2 thin film deposition on the inner surface of a poly(tetra-fluoroethylene) narrow tube by atmospheric-pressure glow microplasma

SiO₂ thin films were deposited on the inner surfaces of a commercial poly(tetrafluoroethylene) narrow tube with an inner diameter of 0.5 mm using tetraethoxysilane/O₂ feedstock gases and He carrier gas by atmospheric-pressure microplasma-enhanced chemical vapor deposition. A glow microplasma was generated inside the tube by radio frequency (RF) capacitively coupled discharge. X-ray photoelectron spectroscopy spectra showed that the tube inner surface was covered by a SiO₂ thin film. Transparent SiO₂ thin films were obtained with a deposition rate of 230 nm/min at an RF power of 6 W and substrate temperature of 100 °C. The wettability of the SiO₂-coated tube was about 3 times as large as that of an untreated sample tube.     

Catalytic cycle of cytochrome-c3 hydrogenase,a [NiFe]-enzyme,deduced from the structures of the enzyme and the enzyme mimic

Hydrogenases catalyze uptake and production of H₂. Heterolytic cleavage of H₂ bound on [NiFe]-hydrogenase (E) produces two unequal H species to form E:H_aH_b, where H_a and H_b behave differently. The structures of various states of the enzyme established by crystallography and spectroscopy were used to construct a catalytic cycle of the enzyme. The Ni–Fe center of the active enzyme has the Ni–Fe bridging site vacant. The enzyme is suggested to bind H₂ either at Ni or Fe atom. In E:H_aH_b, H_a is considered to be a protein-bound hydron (proton or deuteron) at the entrance to the hydrophobic gas tunnel. The structure of a synthetic hydrogenase-mimic suggests H_b to be the 6th ligand to Fe. Two successive one-electron processes from E:H_aH_b complete the catalytic cycle of H₂ uptake. The reverse of the cycle operates in the H₂ production. The proposed catalytic cycle is consistent with the kinetic, crystallographic and spectroscopic studies.