Calculation of pressure fields from arbitrarily shaped, apodized, and excited ultrasound transducers

A method for simulation of pulsed pressure fields from arbitrarily shaped, apodized and excited ultrasound transducers is suggested. It relies on the Tupholme-Stepanishen method for calculating pulsed pressure fields, and can also handle the continuous wave and pulse-echo case. The field is calculated by dividing the surface into small rectangles and then Summing their response. A fast calculation is obtained by using the far-field approximation. Examples of the accuracy of the approach and actual calculation times are given.     

Simulation of nitrogen dynamics and biomass production in winter wheat using the Danish simulation model DAISY

A dynamic simulation model for the soil plant system is described. The model includes a number of main modules, viz., a hydrological model including a submodel for soil water dynamics, a soil temperature model, a soil nitrogen model including a submodel for soil organic matter dynamics, and a crop model including a submodel for nitrogen uptake. The soil part of the model has a one-dimensional vertical structure. The soil profile is divided into layers on the basis of physical and chemical soil characteristics. The simulation model was used to simulate soil nitrogen dynamics and biomass production in winter wheat grown at two locations at various levels of nitrogen fertilization. The simulated results were compared to experimental data including concentration of inorganic nitrogen in soil, crop yield, and nitrogen accumulated in the aboveground part of the crop. Based on this validation it is concluded that the overall performance of the model is satisfactory although some minor adjustments of the model may prove to be necessary.     

Posture variation among office workers when using different information and communication technologies at work and away from work

Office workers perform tasks using different information and communication technologies (ICT) involving various postures. Adequate variation in postures and muscle activity is generally believed to protect against musculoskeletal complaints, but insufficient information exists regarding the effect on postural variation of using different ICT. Thus, this study among office workers aimed to determine and compare postures and postural variation associated with using distinct types of ICT. Upper arm, head and trunk postures of 24 office workers were measured with the Physiometer® over a whole day in their natural work and away-from-work environments. Postural variation was quantified using two indices: APDF_(90-10) and EVA_(sd). Various ICT had different postural means and variation. Paper-based tasks had more non-neutral, yet also more variable postures. Electronics-based tasks had more neutral postures, with less postural variability. Tasks simultaneously using paper- and electronics-based ICT had least neutral and least variable postures. Tasks without ICT usually had the most posture variability. Interspersing tasks involving different ICT could increase overall exposure variation among office workers and may thus contribute to musculoskeletal risk reduction.     

Plasma desorption mass spectrometry, an analytical tool in protein engineering: characterization of modified insulins

Californium-252 plasma desorption mass spectrometry (PDMS) hasbeen employed for the characterization of a series of humaninsulin derivatives in order to evaluate the performance ofthis technique as an analytical tool in protein engineering.Several of the characterized modifications result in a 1 a.m.u.mass change. The precision in mass determination obtainableby PDMS analysis is not sufficient for unambiguous verificationof such modifications based on the molecular weight alone. Itis, however, possible to carry out in situ enzymatic digestionof the sample. Subsequent PDMS analysis will in most cases revealif the modification has been introduced as intended.     

Dense subgraph maintenance under streaming edge weight updates for real-time story identification

Recent years have witnessed an unprecedented proliferation of social media. People around the globe author, everyday, millions of blog posts, social network status updates, etc. This rich stream of information can be used to identify, on an ongoing basis, emerging stories, and events that capture popular attention. Stories can be identified via groups of tightly coupled real-world entities, namely the people, locations, products, etc, that are involved in the story. The sheer scale and rapid evolution of the data involved necessitate highly efficient techniques for identifying important stories at every point of time. The main challenge in real-time story identification is the maintenance of dense subgraphs (corresponding to groups of tightly coupled entities) under streaming edge weight updates (resulting from a stream of user-generated content). This is the first work to study the efficient maintenance of dense subgraphs under such streaming edge weight updates. For a wide range of definitions of density, we derive theoretical results regarding the magnitude of change that a single edge weight update can cause. Based on these, we propose a novel algorithm, DynDens, which outperforms adaptations of existing techniques to this setting and yields meaningful, intuitive results. Our approach is validated by a thorough experimental evaluation on large-scale real and synthetic datasets.     

Electrostatic force microscopy of self-assembled peptide structures

In this report electrostatic force microscopy (EFM) is used to study different peptide self-assembled structures such as tubes and particles. It is shown that not only geometrical information can be obtained using EFM, but also information about the composition of different structures. In particular we use EFM to investigate the structures of diphenylalanine peptide tubes, particles, and CSGAITIG peptide particles placed on pre-fabricated SiO(2) surfaces with a backgate. We show that the cavity in the peptide tubes could be due to the presence of water residues. Additionally we show that self-assembled amyloid peptides form spherical solid structures containing the same self-assembled peptide in its interior. In both cases transmission electron microscopy is used to verify these structures. Further, the limitations of the EFM technique are discussed, especially when the observed structures become small compared with the radius of the AFM tip used. Finally, an agreement between the detected signal and the structure of the hollow peptide tubes is demonstrated.     

Neck postures in air traffic controllers with and without neck/shoulder disorders

Prolonged computer work with an extended neck is commonly believed to be associated with an increased risk of neck-shoulder disorders. The aim of this study was to compare neck postures during computer work between female cases with neck-shoulder disorders, and healthy referents. Based on physical examinations, 13 cases and 11 referents were selected among 70 female air traffic controllers with the same computer-based work tasks and identical workstations. Postures and movements were measured by inclinometers, placed on the forehead and upper back (C7/Th1) during authentic air traffic control. A recently developed method was applied to assess flexion/extension in the neck, calculated as the difference between head and upper back flexion/extension. Results: cases and referents did not differ significantly in neck posture (median neck flexion/extension: -10 degrees vs. -9 degrees ; p=0.9). Hence, the belief that neck extension posture is associated with neck-shoulder disorders in computer work is not supported by the present data.     

Mass and position determination of attached particles on cantilever based mass sensors

An analytical expression relating mass and position of a particle attached on a cantilever to the resulting change in cantilever resonant frequency is derived. Theoretically, the position and mass of the attached particle can be deduced by combining measured resonant frequencies of several bending modes. This finding is verified experimentally using a microscale cantilever with and without an attached gold bead. The resonant frequencies of several bending modes are measured as a function of the bead position. The bead mass and position calculated from the measured resonant frequencies are in good agreement with the expected mass and the position measured.     

On the evolution of task-based analysis of manual materials handling, and its applicability in contemporary ergonomics

The industrial revolution significantly changed the way work was organized and analyzed by the introduction and widespread implementation of the division of labor philosophy. This philosophy has continued to dominate work design, and has evolved beyond the factory to include many facets of service industries, and even professional occupations. The analysis of manual work, particularly materials handling tasks, remains an active domain of ergonomics research and practice. Many of the task-analytic tools used for workplace analysis are rooted in the philosophy of dividing work into elements, analyzing the individual elements, and synthesizing the results into conclusions about the entire job, including the risk of contracting musculoskeletal disorders (MSDs). The authors discuss the notion that the nature of modern work, which is characterized by multiple tasks in a complex time pattern, and the complex nature of MSDs, which are influenced by biomechanical as well as psychological, political, and economic factors, may limit the effectiveness of classical task analytic techniques in preventing MSDs.     

Cost efficiency comparison of four video-based techniques for assessing upper arm postures

Many video-based techniques for assessing postures at work have been developed. Choosing the most appropriate technique should be based on an evaluation of different alternatives in terms of their ability to produce posture information at low input costs, i.e. their cost efficiency. This study compared four video-based techniques for assessing upper arm postures, using cost and error data from an investigation on hairdressers. Labour costs associated with the posture assessments from the video recordings were the dominant factor in the cost efficiency comparison. Thus, a work sampling technique associated with relatively large errors appeared, in general, to be the most cost-efficient because it was labour-saving. Measurement bias and other costs than labour cost for posture assessment influenced the ranking and economic evaluation of techniques, as did the applied measurement strategy, i.e. the numbers of video recordings and repeated assessments of them. PRACTITIONER SUMMARY: The cost efficiency of four video-based techniques for assessing upper arm postures was compared. Work sampling techniques were in general more cost efficient than continuous observations since they were labour-saving. Whilst a labour cost dominated the comparison, 'hidden costs', bias and measurement strategy also influenced this dominance.