Vibration control of a flexible structure using a hybrid mount

This paper presents vibration control of a flexible beam structure using a hybrid mount which consists of elastic rubber and piezoelectric stack actuator. After identifying stiffness and damping properties of the rubber and piezoelectric elements, a mechanical model of the hybrid mount is established. The mount model is then incorporated with the beam structure, and the governing equation of motion is obtained in a state space. A sliding mode controller is designed in order to actively attenuate the vibration of the beam structure subjected to high-frequency and small magnitude excitations. The controller is experimentally realized and measured control responses such as acceleration of the beam structure and force transmission through the hybrid mount are evaluated and presented in both frequency and time domains.     

Standard reference materials for cements

The eight portland cements and two calcium aluminate cements in the Standard Reference Material (SRM) 1880 series are among the most popular SRMs in the catalog of the National Institute of Standards and Technology (NIST) Standard Reference Materials Program. Numerous laboratories rely on them for elemental analysis and qualification for ASTM C 114-00 Standard Test Methods for Chemical Analysis of Hydraulic Cement. NIST has collected new candidate materials from around the world and partnered with Construction Technology Laboratories (CTL) in their preparation and certification. This paper describes the procedures taken at NIST and CTL to prepare and test materials for certification including the homogeneity testing, the X-ray fluorescence methods and the statistical data analysis performed for value assignment.     

Downward comparison, prejudice, and evaluations of others: Effects of self-esteem and threat.

In two studies, we explored the effects of trait self-esteem and threats to the self-concept on evaluations of others. In Study 1, subjects high, moderate, and low in self-esteem received either success, failure, or no feedback on a test and later evaluated three pairs of targets: ingroups and outgroups based on a minimal intergroup manipulation, those who scored above average and those who scored below average on the test, and themselves and the average college student. Study 2 explored the effects of self-esteem and threat on ingroup favoritism in a real-world setting, campus sororities. Together, the results of these studies indicate that individuals high in self-esteem, but not those low in self-esteem, respond to threats to the self-concept by derogating outgroups relative to the ingroup when the group boundaries have evaluative implications. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Non-aqueous titration of the acidic groups in coals: a warning!

Non-aqueous potentiometric titration using ethylenediamine as a solvent and sodium aminoethoxide as a titrant has been shown to be reliable for the estimation of total acidity only when the substrate is completely dissolved in the solvent.     

Asimov’s “three laws of robotics” and machine metaethics

Using Asimov’s “Bicentennial Man” as a springboard, a number of metaethical issues concerning the emerging field of machine ethics are discussed. Although the ultimate goal of machine ethics is to create autonomous ethical machines, this presents a number of challenges. A good way to begin the task of making ethics computable is to create a program that enables a machine to act an ethical advisor to human beings. This project, unlike creating an autonomous ethical machine, will not require that we make a judgment about the ethical status of the machine itself, a judgment that will be particularly difficult to make. Finally, it is argued that Asimov’s “three laws of robotics” are an unsatisfactory basis for machine ethics, regardless of the status of the machine.

---

A novel human type II cytokeratin, K6hf, specifically expressed in the companion layer of the hair follicle

In an attempt to identify new members of the human type II hair keratin family by means of 3'- and 5'-RACE methods and cDNA from anagen hair follicles, we detected a sequence that encoded a hitherto unknown type II cytokeratin. The novel cytokeratin comprises 251 amino acids and exhibits the highest sequence homology with K5. Comparative one- and two-dimensional western blots of keratins from anagen hair bulbs, containing or not containing the outer and inner root sheaths (ORS/IRS), and from footsole epidermis with an antibody against the new cytokeratin, revealed its comigration with K6 and its expression in the ORS/IRS complex. We have therefore named the new cytokeratin K6hf, to distinguish it from the various K6 isoforms and to indicate its expression in the hair follicle. Both in situ hybridization with a K6hf-specific cRNA probe and indirect immunofluorescence with the K6hf antibody showed that K6hf is exclusively expressed in the so-called "companion layer" of the hair follicle, a single layered band of flat and vertically oriented cells between the cuboidal ORS cells and the IRS that stretches from the lowermost bulb region to the isthmus of the follicle. Concomitant K17 and K16 expression studies showed that besides suprabasal ORS cells, these cytokeratins are sequentially expressed subsequent to K6hf in companion cells above the hair bulb. Our study confirms the view of a vertically oriented companion layer differentiation. The clearly delayed K17 and K16 expression relative to that of K6hf in companion cells most probably excludes these keratins as possible type I partners of K6hf and suggests the existence of a still unknown type I partner of its own. Thus, not only morphologically but also biochemically, the companion layer is different from the ORS and can therefore be regarded as an independent histologic compartment of the hair follicle.     

Evaluation of terrain and canopy height products in central African tropical forests

Since the introduction of space-based altimetry data into the science community, global products associated with elevation and vegetation metrics have been heavily utilized for a variety of ecological applications. Satellite remote sensing enables the collection of global (or near-global), standardized data sets, which can be used in their original form or used as inputs along with other data sets in generating new products. Recent effort has focused on using available data to generate maps of tree heights at a global scale in the service of a better understanding of above ground biomass distribution and its effects on global carbon storage. However, global data sets, while validated at a global scale, often display local and regional variations in accuracy which must be quantified before applying those data sets to smaller scale studies. This work addresses the need for a better understanding of the quality of the Shuttle Radar Topography Mission (SRTM) 90 m digital elevation model and a global 1 km canopy height model in the dense tropical forests of Gabon by using a small-footprint airborne lidar survey and large-footprint, space-based waveform lidar data from teh National Air and Space Administration’s Ice, Cloud, and land Elevation Satellite (ICESat) for validation. As expected, the study found SRTM elevations to be heavily biased by vegetation in this biome, with elevations consistently located within the canopy volume. In addition, the global canopy height model consistently underestimates maximum canopy height at both local and regional scales.