Tuning-current splitting network for three-section DBR lasers

A simple current-splitting network for DBR-laser frequency tuning is proposed that distributes a single control current among two tuning sections and can adjust the current distribution without yielding impedance mismatching. The nonlinear characteristics of the tuning sections realise the non-proportional current splitting suitable for continuous tuning; 470 GHz (3.8 nm) tuning range is achieved     

Design of Polarization-independent Wavelength-interleave Coupler in Fluorinated Polyimide Waveguide

Based on the measurement of dispersion characteristic and birefractive index of the fluorinated polyimide film,a statistical optimum design method is proposed and used to realize the design of 32-and 36-wavelengths optical waveguide wavelength-interleave coupler (i,e.,interleaver) with the optimization of polarization fluctuation and wavelength interval of 0.8nm at 1550nm. The largest cross coupling ratios of the two interleavers are respectively less than 1.8% and 3.5%, while the least through coupling ratios are respectively greater than 98. 2% and 96. 5%. The output differences due to polarization fluctuation are less than 1.7% and 3.2%     

Electrochemically induced asymmetrical etching in InAlAs/InGaAs heterostructures for MODFET gate-groove fabrication

We have achieved a self-controlled asymmetrical etching in metalorganic chemical vapor deposition-grown InAlAs/InGaAs heterostructures, which can be suitable for fabricating modulation-doped field-effect transistors (MODFETs) with gate-groove profiles for improved performance. The technology is based on electrochemical etching phenomena, which can be effectively controlled by using different surface metals for ohmic electrodes. When surface metals of Pt and Ni are deposited on the source and the drain, respectively, the higher electrode potential of Pt results in slower etching on the source side than on the drain side. Thus, asymmetry of gate grooves can be formed by wet-chemical etching with citric-acid-based etchant. This represents a new possibility to conduct “recess engineering” for InAlAs/InGaAs MODFETs.     

The importance of electrochemistry-related etching in thegate-groove fabrication for InAlAs/InGaAs HFETs

For the first time, the surface metal on nonalloyed ohmic electrodes is found to significantly change the profiles of gate grooves, when resist openings are employed to monitor drain current during wet-chemical gate recess for sub-micron InAlAs/lnGaAs heterojunction field-effect transistors (HFETs). The surface metal of Ni enhances the etching rate in comparison with that in the absence of electrodes by a factor of 4 and 10, laterally and vertically, which is favorable to fabricate deep gate grooves with small side etching. The Pt surface metal, however, leads to preferential etching of InGaAs over InAlAs, which can be useful to realize large side etching. The existence of an electrochemistry-related etching component, which arises when the ohmic electrodes are present during recess etching, is considered to be responsible for these behaviors     

Design and characteristics of InGaAs/InP composite-channel HFET's

A design for composite-channel structures consisting of an InGaAs channel and an InP subchannel for use as heterostructure field-effect transistors is presented for the first time. This novel channel structure takes advantage of both the high drift velocity and low impact ionization of InP at high electric fields as well as the high electron mobility of InGaAs at low electric fields. It is shown that the doping density of the InP subchannel is the key parameter to realize the advantages of the composite channel. A very high transconductance of 1.29 S/mm and a current gain cutoff frequency of 68.7 GHz are achieved with 0.6 and 0.7 /spl mu/m gates, respectively. The average velocity of electrons in the composite channel is 2.9/spl times/10/sup 7/ cm/s. The devices have no kink phenomena in their I-V characteristics possibly due to low impact ionization in the InP subchannel.<>     

Inhibitory effect of alpha-tocopherol on methemoglobin formation by nitric oxide in normal and acatalasemic mouse hemolysates

The inhibitory effect of alpha-tocopherol on methemoglobin formation in normal and acatalasemic mice was studied by exposing their hemolysates to nitric oxide. Methemoglobin formation in normal and acatalasemic mouse hemolysates exposed to nitric oxide were significantly inhibited by the addition of alpha-tocopherol at final concentrations ranging from 1.2 to 5.8 mM. Negative correlations were observed between the logarithm of alpha-tocopherol concentration and the methemoglobin formation. The formation of methemoglobin in acatalasemic mouse hemolysates was greater than that in normal mouse hemolysates with or without added alpha-tocopherol. The methemoglobin formation in acatalasemic mice was also significantly inhibited by addition of more than 500 units/ml of catalase, and the methemoglobin formation in normal and acatalasemic mice was also inhibited with sodium diethyldithiocarbamate at a final concentration of 1 M.     

Changes in cerebral blood flow and oxygen metabolism related to magnetic resonance imaging white matter hyperintensities in Alzheimer's disease

We studied changes in cerebral perfusion and oxygen metabolism to elucidate the pathophysiological nature and clinical significance of white matter hyperintensities in Alzheimer's disease (AD). METHODS: Sixteen AD patients (age 71.6 +/- 3.1 yr) whose T2-weighted MR images showed white matter hyperintensities, and 16 age-matched AD patients (age 71.0 +/- 4.3 yr) without white matter hyperintensities were compared. Regional cerebral blood flow (CBF), oxygen metabolism (CMRO2) and oxygen extraction fraction (OEF) were measured by using (15)O steady-state method and PET. RESULTS: There was no significant difference in cognitive impairment between the two groups. Compared to the patients without white matter hyperintensities, those with them had significantly low CBF values and significantly high OEF values in all cortical and white matter regions. However, there were no significant differences in CMRO2 values between the two groups. Severity of white matter hyperintensities correlated with the mean cortical and mean white matter OEF. CONCLUSION: In AD patients, white matter hyperintensities on T2-weighted MR images represent ischemic changes in which oxygen metabolism and function are fairly compensated. These changes are not disease-specific but are age-associated coincidences, as in normal aging with or without vascular risk factors.     

Preparation and Luminescence Spectra of Calcium- and Rare-Earth (R = Eu, Tb, and Pr)-Codoped α-SiAlON Ceramics

Rare-earth-doped oxynitride or nitride compounds have been reported to be luminescent and may then serve as new phosphors with good thermal and chemical stabilities. In this work, we report the photoluminescence (PL) spectra of europium-, terbium-, and praseodymium-doped Ca-α-SiAlON ceramics. The highly dense ceramics were prepared by hot pressing at 1750°C for 1 h under 20 MPa in a nitrogen atmosphere. Europium-doped Ca-α-SiAlON displayed a single broad emission band peaking at λ= 550–590 nm depending on the europium concentration. The emission bands in the spectra of europium-doped Ca-α-SiAlONs were assigned to the allowed transition of Eu²⁺ from the lowest crystal field component of 4 f ⁶5 d to ⁸S_7/2 (4 f ⁷) ground-state level. The emission spectra of terbium- and praseodymium-doped Ca-α-SiAlON ceramics both consisted of several sharp lines, which were attributed to the ⁵D₄→⁷F _j ( j = 3, 4, 5, 6) transitions of Tb³⁺ and ³P₀→³H _j ( j = 3, 4, 5) transitions of Pr³⁺, respectively. In particular, the terbium-doped α-SiAlON ceramics showed a strong green emission among these phosphors.