Self-oscillating dimmable electronic ballast

This paper presents a simple alternative for an electronic ballast operating in self-sustained oscillating mode with dimming capability for fluorescent lamps. A simple modification in one of the gate drivers side circuit allows the lamp to dim without compromising the simplicity, reliability, and low cost which characterize the self-oscillating electronic ballast (SOEB). A qualitative analysis is presented to explain the behavior of the proposed self-oscillating electronic ballast with dimming feature. In addition, the stability and the key equations for the design are derived using the extended Nyquist criterion and describing function method. Experimental results from two 40-W electronic ballasts are presented to demonstrate the performance and to validate the analysis carried out.     

Nisin expression production from Lactococcus lactis in milk whey medium

BACKGROUND: Nisin is a commercially available bacteriocin produced by Lactococcus lactis ATCC 11454 and used as a natural agent in the biopreservation of food. In the current investigation, milk whey, a byproduct from dairy industries was used as a fermentation substrate for the production of nisin. Lactococcus lactis ATCC 11454 was developed in a rotary shaker (30 °C/36 h/100 rpm) using two different media with milk whey (i) without filtration, pH 6.8, adjusted with NaOH 2 mol L^?1 and without pH adjustment, both autoclaved at 121 °C for 30 min, and (ii) filtrated (1.20 µm and 0.22 µm membrane filter). These cultures were transferred five times using 5 mL aliquots of broth culture for every new volume of the respective media. RESULTS: The results showed that culture media composed of milk whey without filtration supplied L. lactis its adaptation needs better than filtrated milk whey. Nisin titers, in milk whey without filtration (pH adjusted), was 11120.13 mg L^?1 in the second transfer, and up to 1628‐fold higher than the filtrated milk whey, 6.83 mg.L^?1 obtained in the first^t transfer. CONCLUSIONS: Biological processing of milk byproducts (milk whey) can be considered a profitable alternative, generating high‐value bioproducts and contributing to decreasing river disposals by dairy industries. Copyright © 2008 Society of Chemical Industry     

A fuzzy queue-aware routing approach for wireless mesh networks

Recent advances in Wireless Mesh Networks (WMNs) have overcome the drawbacks of traditional wired and ad-hoc networks and now they are seen as a means of allowing last mile communications with quality level assurance in Future Multimedia Systems. However, new routing schemes are needed to provide end-to-end Quality of Service (QoS) and Quality of Experience (QoE) support for delay/loss/jitter-sensitive multimedia applications. The well-known OLSR (Optimized Link State Routing) protocol with ETX (Expected Transmission Count) metric brings many benefits to the path selection process, but has a drawback with regard to queue availability management, which reduces the system performance. This problem is caused when OLSR-EXT control messages are exchanged and the queues of mesh routers along the end-to-end communication path are overloaded. As a result, multimedia-related packets will suffer from loss/delay/jitter and the overall system performance will decrease. This paper proposes the Optimized Link State Routing-Fuzzy ETX Queue (OLSR-FEQ) protocol to overcome the limitations of OLSR-ETX regarding queue availability, QoS and QoE assurance. OLSR-FEQ optimizes network and user-based parameters by coordinating queue availability, QoS and fuzzy issues in the routing decision process as a way of allocating the best paths for multimedia applications. Performance evaluations were carried out with the Network Simulator (NS-2.34) to show the benefits of the proposed solution when compared with existing routing schemes, namely OLSR-ETX, OLSR-FLC, OLSR-MD and HWMP (IEEE 802.11s standard), regarding QoS (unsuccessful packet delivery and throughput) and QoE (PSNR, SSIM, VQM and MOS) parameters.     

BENCHMARKING RIVER HABITAT IMPROVEMENT

River ecosystems have witnessed a long history of human pressure, particularly the disruption of freshwater fish populations. The awareness of this situation has led to many habitat improvement projects, with a variable degree of success. In natural situations, fish populations co‐inhabit throughout the hydrological cycle with different degrees of adequacy, and the sequence of favourable and unfavourable conditions dictates abiotic constraints and biotic interactions that shape the final biological assemblages. We postulate that a part of unsuccessful restoration results is related to insufficient closeness to the natural habitat conditions of the river type that is to be restored, including the naturally adverse periods. We used the river2d model to predict habitat availability as weighted usable area (WUA) at a degraded site that is to be restored, for two native Mediterranean species and their life stages—the Southwestern nase Iberochondrostoma almacai and the Arade chub Squalius aradensis. We then analysed the yearly evolution of the natural WUA at a nearby reference site. Overall, the reference site exhibited the longest periods during which the WUA was continuously lower than the chosen WUA thresholds for each of the four bioperiods. Considerable divergences from natural habitat availability values can be seen for the spawning, rearing and growth bioperiods. Restoration outcomes can result in appreciable deviations—favourable or unfavourable to fish populations—from the WUA occurring under natural conditions over the course of the year. Restoration should therefore take account of local hydraulic and habitat patterns that govern population dynamics and result in the final fish assemblage. Copyright © 2011 John Wiley & Sons, Ltd.     

Electrical resistivity in ferromagnetic NiCu alloys near the Curie point

Direct measurements of the temperature derivative of the electrical resistivity d/dT have been made on several ferromagnetic NiCu alloys with high Cu content (20, 30, 40, 50.4 at %). For Ni₈₀Cu₂₀ and Ni₇₀Cu₃₀ the results closely resemble the general pattern found in pure ferromagnets: d/dT - b – a ln ¦¦, for 10^–3 ¦¦ 10^–1, with a and b constants and = (T/T _c )– 1. In Ni₆₀Cu₄₀ the rounding off of the magnetic transition is already so pronounced that a similar analysis is hardly significant. In the Ni_49.6Cu_50.4 sample negative values of d/dT were confirmed above ~165 K. The possible theoretical implications of the results are briefly discussed.Work supported by Instituto de Alta Cultura, Portugal (Project PF1).     

Improving the performance of fuzzy rules-based forecasters through application of FCM algorithm

Prediction models based on artificial intelligence techniques have been widely used in Time Series Forecasting in several areas. They are often fuzzy models or neural networks. This paper describes the development of neural and fuzzy models for forecasting time series of practical examples, and shows the comparisons of results between models, including the results of statistical modeling. The use of data clustering algorithms like Fuzzy C-Means is considered in fuzzy models.     

In situ compatibilization of a polyethylene,polypropylene, and polystyrene ternary blend through Friedel–Crafts alkylation

The Friedel–Crafts alkylation reaction has been applied to reactively compatibilize a ternary blend of high-density polyethylene (HDPE), polypropylene (PP), and polystyrene (PS). The reactions were carried out in an internal mixer using varying catalyst concentrations. The resulting compatibilizer was quantified after Soxhlet extraction. In addition, p-substitution due to the grafting of alkyl groups onto the PS benzene ring was identified via nuclear magnetic resonance spectroscopy. The size of the PS domain in the reactive compositions is decreased by 80%. Moreover, the phase in which PS droplets were dispersed varied, that is, in the nonreactive blends they were found in the PP phase and in the reactive blends they shifted toward the HDPE phase. The effect of the compatibilizing agent was to improve the mechanical properties of the blend. Even with the lowest catalyst content, the properties of elongation-at-break, tensile strength, toughness, and elastic modulus showed improvements. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48295.     

Dam Hydrological Risk and the Design Flood Under Non-stationary Conditions

Water Resources Management - Increasing global trends in time series of annual maximum daily streamflow (AMX) raise the concern that the safety of dams and other sensitive structures is...     

Identifying organizational requirements for the implementation of Advanced Manufacturing Technologies (AMT)

AMT selection and adoption processes have been extensively studied. Topics that include financial and human factors, productivity, and coordination of the AMT implementation establish a substantial content of the present research agenda. The purpose of this paper is to study the organizational factors that influence the AMT implementation, considering a manufacturing strategy context and an analysis based on an organizational design framework. The research strategy is based on ‘empirical iterations’ using survey secondary data, experts’ interviews information and multiple case studies. The results show that there is a set of recommendations, which strongly influence the AMT implementation. Companies require a structured and integrative approach for the AMT implementation in order to take advantage of all their individual and systemic benefits. The set of proposed AMT recommendations for integrating these technologies to the organizational design are framed by structural, process and contextual aspects.     

Obtainment of porcelain floor tiles added with petroleum oily sludge

This study focuses on the processing of vitrified floor tiles incorporated with a petroleum oily sludge. Floor tile formulations containing up to 5 wt% of the petroleum oily sludge in replacement of kaolin were prepared. The tile formulations were granulated by the dry process, pressed, and fired at temperatures between 1200 and 1250 °C using a fast-firing cycle. The specimens were characterized before and after firing. XRD was used to identify the crystalline phases present during sintering and SEM was used to show how the structure changes during densification. Three parameters were used to describe densification: linear shrinkage, water absorption, and flexural strength. The results showed that the petroleum oily sludge could be used as an alternative raw material in the floor tile formulations. The densification behavior of the floor tile pieces is influenced by the petroleum oily sludge addition and firing temperature. The vitrified floor tiles produced reached the technical characteristics of porcelain floor tiles, depending on petroleum oily sludge content and firing temperature.