Extracellular Vesicles and Asthma—More Than Just a Co-Existence

Extracellular vesicles (EVs) are membranous structures, which are secreted by almost every cell type analyzed so far. In addition to their importance for cell-cell communication under physiological conditions, EVs are also released during pathogenesis and mechanistically contribute to this process. Here we summarize their functional relevance in asthma, one of the most common chronic non-communicable diseases. Asthma is a complex persistent inflammatory disorder of the airways characterized by reversible airflow obstruction and, from a long-term perspective, airway remodeling. Overall, mechanistic studies summarized here indicate the importance of different subtypes of EVs and their variable cargoes in the functioning of the pathways underlying asthma, and show some interesting potential for the development of future therapeutic interventions. Association studies in turn demonstrate a good diagnostic potential of EVs in asthma.     

Boosting the activity of FeOOH via integration of ZIF-12 and graphene to efficiently catalyze the oxygen evolution reaction

Transition metal oxyhydroxides have been used as promising electrocatalysts for water splitting however, their catalytic activity is restricted due to low surface area and poor conductivity. Herein, we report novel composite FeOOH@ZIF-12/graphene composite as electrocatalyst for water oxidation, whereby ZIF-12 provide extra surface for the FeOOH dispersion whilst graphene act as excellent electron mediator. The composite shows a low overpotential value of 291 mV to attain a current density of 10 mA cm^?2 and a low Tafel slope value of 78 mV dec^?1. The catalyst offers a maximum current density of 101 mA cm^?2, while it gives a turnover frequency (TOF) value of 0.031 s^?1 at an overpotential of 291 mV only. The excellent activity and remarkable stability of composite is attributed to highly conductive and porous support.     

Restoration of blood pressure by choline treatment in rats made hypotensive by haemorrhage

1. Intracerebroventricular (i.c.v.) injection of choline (25-150 micrograms) increased blood pressure in rats made acutely hypotensive by haemorrhage. Intraperitoneal administration of choline (60 mg kg-1) also increased blood pressure, but to a lesser extent. Following i.c.v. injection of 25 micrograms or 50 micrograms of choline, heart rate did not change, while 100 micrograms or 150 micrograms i.c.v. choline produced a slight and short lasting bradycardia. Choline (150 micrograms) failed to alter the circulating residual volume of blood in haemorrhaged rats. 2. The pressor response to i.c.v. choline (50 micrograms) in haemorrhaged rats was abolished by pretreatment with mecamylamine (50 micrograms, i.c.v.) but not atropine (10 micrograms, i.c.v.). The pressor response to choline was blocked by pretreatment with hemicholinium-3 (20 micrograms, i.c.v.). 3. The pressor response to i.c.v. choline (150 micrograms) was associated with a several fold increase in plasma levels of vasopressin and adrenaline but not of noradrenaline and plasma renin. 4. The pressor response to i.c.v. choline (150 micrograms) was not altered by bilateral adrenalectomy, but was attenuated by systemic administration of either phentolamine (10 mg kg-1) or the vasopressin antagonist [beta-mercapto-beta,beta-cyclopenta-methylenepropionyl1, O-Me-Tyr2,Arg8]-vasopressin (10 micrograms kg-1). 5. It is concluded that the precursor of acetylcholine, choline, can increase and restore blood pressure in acutely haemorrhaged rats by increasing central cholinergic neurotransmission. Nicotinic receptor activation and an increase in plasma vasopressin and adrenaline level appear to be involved in this effect of choline.     

Enhanced Image Detection on an ARM based Embedded System

This paper presents a new technique for thedetection of Integrated Circuits within images of Printed Circuit Boards autonomouslyand without the need to be assisted by CAD data. The technique is a key partof a suite of algorithms targeted for an embedded System On Chip architecturebased on the ARM7 platform for real time detection of PCB images for diagnosticpurposes. The technique has a significant reduction in complexity when comparedto conventional approaches such as the Hough Transform. The reduction in complexitymakes the approach ideal for an embedded vision application suchas the one described in this paper. This paper presents the technique, thetarget embedded architecture and results showing the reduction in complexitywhen compared to a Hough Transform.     

Experimental and mathematical studies of natural convection for solid-salt dissolution in water

The phenomena of natural convection caused by a concentration gradient usually creates currents as a result of buoyancy forces. These forces are formed from the combined effect of a fluid density gradient and the body force (gravitational force). The above phenomenon was studied experimentally in a circular glass column of 0.08 m diameter and 1 m length. This column was erected vertically and filled with distilled water with a salt bag placed on top of it and partially immersed in water. The dissolution mechanism was then modelled and a finite difference method was used to solve the formulated equations by using the implicit scheme of MacCormack (Anderson et al., 1984). The experimental results and the numerical predictions are represented graphically and give compatible agreement.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Development of an Expert System for Selection of Dam Type on Alluvium Foundations

. A knowledge-based expert system was developed to aid in the selection of the type of dam. The dam type selector expert system (DTSA ES) was designed to determine the type of dam on the alluvium foundations. Detailed expert knowledge is required to estimate the type of dam and to develop an expert system. The DTSA ES utilizes rules of thumb used by an expert for determining the selection of the type of dam. The DTSA ES was developed using a shell program. The expert system was tested on several dam sites in order to validate the decision obtained. The use of this expert system, containing knowledge about the selection of dam type, can be helpful to students, potential owners or contractors in selecting dam types. The current prototype always needs additional parameters for more detailed analyses of new developments. However, the current DTSA ES is designed to include existing information about dam types.     

A case of clofazimine enteropathy

A case of clofazimine enteropathy is described. A young male received clofazimine 200 mg daily for four years. He was admitted in a pigmented, emaciated state with abdominal pain, diarrhoea and weight loss. At laparotomy his abdominal organs were stained with dark brown-black pigment due to heavy infiltration with clofazimine crystals. Despite withdrawal of clofazimine his symptoms failed to settle. He developed oedema and hypoalbuminaemia. He died following a cerebral infarction.     

Lung nodules detection using semantic segmentation and classification with optimal features

Neural Computing and Applications - Lung cancer is a deadly disease if not diagnosed in its early stages. However, early detection of lung cancer is a challenging task due to the shape and size of...     

Removal of metal ions using lignite in aqueous solution—Low cost biosorbents

Turkish lignite can be used as a new adsorption material for removing some toxic metals from aqueous solution. The adsorption of lignite (brown young coals) to remove copper (Cu²⁺), lead (Pb²⁺), and nickel (Ni²⁺) from aqueous solutions was studied as a function of pH, contact time, metal concentration and temperature. Adsorption equilibrium was achieved between 40 and 70 min for all studied cations except Pb²⁺, which is between 10 and 30 min. The adsorption capacities are 17.8 mg/g for Cu²⁺, 56.7 mg/g for Pb²⁺, 13.0 mg/g for Ni²⁺ for BC₁ (Ilg?n lignite) and 18.9 mg/g for Cu²⁺, 68.5 mg/g for Pb²⁺, 12.0 mg/g for Ni²⁺ for BC₂ (Beysehir lignite) and 7.2 mg/g for Cu²⁺, 62.3 mg/g for Pb²⁺, 5.4 mg/g for Ni²⁺ for AC (activated carbon). More than 67% of studied cations were removed by BC₁ and 60% BC₂, respectively from aqueous solution in single step. Whereas about 30% of studied cations except Pb²⁺, which is 90%, were removed by activated carbon. Effective removal of metal ions was demonstrated at pH values of 3.8–5.5. The adsorption isotherms were measured at 20 °C, using adsorptive solutions at the optimum pH value to determine the adsorption capacity. The Langmuir adsorption isotherm was used to describe observed sorption phenomena. The rise in temperature caused a slight decrease in the value of the equilibrium constant (K_c) for the sorption of metal ions. The mechanism for cations removal by the lignite includes ion exchange, complexation and sorption. The process is very efficient especially in the case of low concentrations of pollutants in aqueous solution, where common methods are either economically unfavorable or technically complicated.