Model and nonlinear dynamic analysis of linear guideway subjected to external periodic excitation in five directions

Nonlinear Dynamics - Investigation of the dynamic characteristics of linear guideway is essential for enhancing structural performance of machine tools. However, few mechanical models are...     

钌催化二氧化碳加氢合成甲酸的研究

钌催化二氧化碳加氢合成甲酸的研究张俊忠，李忠，王辉，王常有（太原工业大学煤化所Ｃ１室，太原０３００２４）关键词ＣＯ_２催化加氢，甲酸合成，钌络合催化剂１．前言由于ＣＯ２对环境、气候和生态等方面带来愈加恶劣的影响以及碳资源的日益短缺，近年来对ＣＯ２开发?..     

有机硅耐磨透明涂层的固化分析

ＦＴＩＲ、ＴＧ、ＴＢＡ等对有机硅耐磨涂料（有机硅溶胶）的热固化过程研究表明有机硅胶体中缔合羟基间的脱水缩合速率很高；羟基脱水程度与固化温度有关，温度越高，达平衡时羟基的浓度越低，在１０５～１３０℃间羟基的浓度变化最大，加入适当的固化剂，对羟基的脱水交联有促进作用，在较高的固化温度下，反应体系中出现了环氧环异构化产生的酮羰基的吸收峰     

中药微量元素的主成分分析

基于主成分分析的方法,研究了中药的相似性。主成分综合得分越近,中药就越相似。     

高折光指数光学树脂的合成——相转移法合成不饱和硫醇酯单体的条件控制

采用正常的低温相转移催化（ＰＴＣ）和反滴碱溶液ＰＴＣ法分别合成了含硫双烯ＭＥＳＤＭＡ和单烯ＭＥＰＳＭＡ．１Ｈ ＮＭＲ分析证明ＭＥＳ中的杂质主要是由原料ＴＤＧ引入的．对含单个巯基的ＭＥＰＳ的正常ＰＴＣ酯化接枝双键，因存在巯基和不饱和双键的加成反应而导致失败．作者最终得到了折光指数在１６２５以上的ＭＥＳＤＭＡ／ＭＥＰＳＭＡ共聚物．     

EFFECT OF La_2O_3 AND CeO_2 ON CH_4-CO_2 REFORMING NICKEL CATALYST

IntroductionConsiderableattelltionisno\vbeillgpaidtotheCO7refonningof.etha..llto]forseveralreasonst(l)withthedevelopmentofindustrics.moreandnlorcCOZIsabettedintotheatmosphere,leadingto"greenhouseeffect",whichhasbroughtaboutgreatilltcreslallovertheworld.Th…     

Polylactide hollow spheres fabricated by interfacial polymerization in an oil-in-water emulsion system

A one-step pathway has been adopted to fabricate biodegradable polylactide (PLA) hollow spheres by interfacial polymerization in an oil-in-water emulsion system. The mechanism of sphere formation is suggested with respect to interfacial cross-linking polymerization and subsequent precipitation of the unreacted PLA macromonomers onto the preformed shells. Their hollow nature and morphology were verified by transmission electron microscopy and scanning electron microscope characterizations.     

Preparation of porous polylactide microspheres by emulsion‐solvent evaporation based on solution induced phase separation

Porous polylactide (PLA) microspheres were fabricated by an emulsion‐solvent evaporation method based on solution induced phase separation. Scanning electron microscopy (SEM) observations confirmed the porous structure of the microspheres with good connectivity. The pore size was in the range of decade micrometers. Besides large cavities as similarly existed on non‐porous microspheres, small pores were found on surfaces of the porous microspheres. The apparent density of the porous microspheres was much smaller than that of non‐porous microspheres. Fabrication conditions such as stirring rate, good solvent/non‐solvent ratio, PLA concentration and dispersant (polyvinyl alcohol, PVA) concentration had an important influence on both the particle size and size distribution and the pore size within the microspheres. A larger pore size was achieved at a slower stirring rate, lower good solvent/non‐solvent ratio or lower PLA concentration due to longer coalescence time. Copyright © 2005 John Wiley & Sons, Ltd.     

Ru_3（CO）_（12）均相和非均相催化1－庚烯氢甲酰化的研究

Ｒｕ＿３（ＣＯ）＿（１２）均相和非均相催化１－庚烯氢甲酰化的研究李忠，张俊忠，李彦旭，阴丽华，王常有（太原工业大学煤化工研究所，太原０３００２４）关键词羰基化，钌催化剂，均相催化，多相催化氢甲酰化反应是工业上重要的均相络合催化反应之一，主要应用钴、铑...