Response level crossing rate of a linear system excited by a partially specified Gaussian load process

The problem of determining the maximum mean response level crossing rate of a linear system driven by a partially specified Gaussian load process has been considered. The partial specification of the load is given only in terms of its total average energy. The critical input power spectral (PSD) function, which maximizes the mean response level crossing rate, is obtained. The critical input PSD turns out to be highly narrow-banded which fails to capture the erratic nature of the excitation. Consequently, the trade-off curve between the maximum mean response level crossing rate and the maximum disorder in the input process, quantified in terms of its entropy rate, has been generated. The method of Pareto optimization is used to tackle the conflicting objectives of the simultaneous maximization of the mean response level crossing rate and the input entropy rate. The non-linear multi-objective optimization has been carried out using a recently developed multi-criteria genetic algorithm scheme. Illustrative example of determining the critical input of an axially vibrating rod, excited by a partially specified stationary Gaussian load process, has been considered.     

Additive manufacturing in the spare parts supply chain

As additive manufacturing (AM) evolves to become a common method of producing final parts, further study of this computer integrated technology is necessary. The purpose of this research is to evaluate the potential impact of additive manufacturing improvements on the configuration of spare parts supply chains. This goal has been accomplished through scenario modeling of a real-life spare parts supply chain in the aeronautics industry. The spare parts supply chain of the F-18 Super Hornet fighter jet was selected as the case study because the air-cooling ducts of the environmental control system are produced using AM technology. In total, four scenarios are investigated that vary the supply chain configurations and additive manufacturing machine specifications. The reference scenario is based on the spare parts supplier's current practice and the possible future decentralization of production and likely improvements in AM technology. Total operating cost, including downtime cost, is used to compare the scenarios. We found that using current AM technology, centralized production is clearly the preferable supply chain configuration in the case example. However, distributed spare parts production becomes practical as AM machines become less capital intensive, more autonomous and offer shorter production cycles. This investigation provides guidance for the development of additive manufacturing machines and their possible deployment in spare parts supply chains. This study contributes to the emerging literature on AM deployment in supply chains with a real-world case setting and scenario model illustrating the cost trade-offs and critical requirements for technology development.     

Correction to: Investigating Energy Flow in Water-Energy Storage for Hydropower Generation in Water Distribution Systems

Water Resources Management - The original version of this article unfortunately contains mistake introduced during the publishing process. The author name “M. Fayzul” should be deleted...     

Pharmacophore and docking-based combined in-silico study of KDR inhibitors

The growth and metastasis of solid tumors is dependent on angiogenesis. The vascular endothelial growth factor (VEGF) and its cell surface receptor in human KDR (kinase domain containing receptor or VEGFR-2) have particular interest because of their importance in angiogenesis. The development of novel inhibitors of VEGFR-2 would be helpful to check the growth of tumors. Quantitative structure activity relationship (QSAR) analyses used to understand the structural factors affecting inhibitory potency of thiazole-substituted pyrazolone derivatives. Several pharmacophore-based models indicated the importance of steric, hydrophobic and hydrogen bond acceptor groups to inhibitory activity. The comparative molecular field analyses (CoMFA) and comparative molecular similarity indices analyses (CoMSIA) based 3D-QSAR models were derived using pharmacophore-based alignment. Both CoMFA (q² = 0.70, r² = 0.97 and ) and CoMSIA (q² = 0.54, r² = 0.82 and ) gave reasonable results. The molecular docking (receptor-guided technique) with a recently reported receptor structure (PDB = 1YWN) were performed. The docked alignment was subsequently used for 3D-QSAR (CoMFA; q² = 0.56, r² = 0.97, , CoMSIA; q² = 0.58 r² = 0.91, ). The overall both studies were indicated, steric, electrostatic and hydrogen bond acceptor effects contribute to the inhibitory activity. CoMFA and CoMSIA models suggested that a positive bulk with hydrophobic effect is desirable around position 4 and 5 and hydrogen bond acceptor groups around pyrazolones ring will be helpful.     

Complexity and design of QoS routing algorithms in wireless mesh networks

Quality of service (QoS) provisioning in wireless mesh networks (WMNs) is an open issue to support emerging multimedia services. In this paper, we study the problem of QoS provisioning in terms of end-to-end bandwidth allocation in WMNs. It is challenging due to interferences in the networks. We consider widely used interference models and show that except a few special cases, the problem of finding a feasible path is NP-complete under the models. We propose a k-shortest path based algorithmic framework to solve this problem. We also consider the problem of optimizing network performance by on-line dynamic routing, and adapt commonly used conventional QoS routing metrics to be used in WMNs. We find the optimal solutions for these problems through formulating them as optimization models. A model is developed to check the existence of a feasible path and another to find the optimal path for a demand; moreover, an on-line optimal QoS routing algorithm is developed. Comparing the algorithms implemented by the proposed framework with the optimization models shows that our solution can find existing feasible paths with high probability, efficiently optimizes path lengths, and has a comparable performance to the optimal QoS routing algorithm. Furthermore, our results show that contrary to wireline networks, minimizing resource consumption should be preferred over load distribution even in lightly loaded WMNs.     

A linear model of elasto-plastic and adhesive contact deformation

Rigorous non-linear models of elasto-plastic contact deformation are time-consuming in numerical calculations for the distinct element method (DEM) and quite often unnecessary to represent the actual contact deformation of common particulate systems. In this work a simple linear elasto-plastic and adhesive contact model for spherical particles is proposed. Plastic deformation of contacts during loading and elastic unloading, accompanied by adhesion are considered, for which the pull-off force increases with plastic deformation. Considering the collision of a spherical cohesive body with a rigid flat target, the critical sticking velocity and coefficient of restitution in the proposed model are found to be very similar to those of Thornton and Ning’s model. Sensitivity analyses of the model parameters such as plastic, elastic, plastic-adhesive stiffnesses and pull-off force on work of compaction are carried out. It is found that by increasing the ratio of elastic to plastic stiffness, the plastic component of the total work increases and the elastic component decreases. By increasing the interface energy, the plastic work increases, but the elastic work does not change. The model can be used to efficiently represent the force-displacement of a wide range of particles, thus enabling fast numerical simulations of particle assemblies by the DEM.     

Gastroprotective effects of herbal medicines (roots)

Herbal medicines are now commonly used all over the world and this has increased global demand. Quality, safety, and efficacy of these drugs have become a serious concern. This review presents the medicinal plants cited in folklore that are used to treat gastrointestinal ulcers. Electronic databases, that is, Web of Science, PubMed, Scopus, and Google Scholar were searched to identify the gastroprotective effects of each plant. Ethnopharmacological studies have reported various botanical products with antiulcer activities, but there has been limited scientific research, presenting clinical data to validate the efficacy and safety of medicinal herbs as gastroprotective agents. Most studies centered on pharmacological properties of medicinal herbs as used animals models. This information has prompted us to compile a list of the medicinal herbs cited in folklore with gastroprotective activity.