Dual effect synergistically triggered Ce:(Y,Tb)3(Al,Mn)5O12 transparent ceramics enabling a high color-rendering index and excellent thermal stability for white LEDs

Ce:Y₃Al₅O₁₂ transparent ceramics (TCs) with appropriate emission light proportion and high thermal stability are significant to construct white light emitting diode devices with excellent chromaticity parameters. In this work, strategies of controlling crystal-field splitting around Ce³⁺ ion and doping orange-red emitting ion, were adopted to fabricate Ce:(Y,Tb)₃(Al,Mn)₅O₁₂ TCs via vacuum sintering technique. Notably, 85.4 % of the room-temperature luminescence intensity of the TC was retained at 150 °C, and the color rendering index was as high as 79.8. Furthermore, a 12 nm red shift and a 16.2 % increase of full width at half maximum were achieved owing to the synergistic effects of Tb³⁺ and Mn²⁺ ions. By combining TCs with a 460 nm blue chip, a warm white light with a low correlated color temperature of 4155 K was acquired. Meanwhile, the action mechanism of Tb³⁺ ion and the energy transfer between Ce³⁺ and Mn²⁺ ions were verified in prepared TCs.     

Improvement of Concrete Properties and Reinforcing Steel Inhibition Using a Natural Product Admixture

The use of a natural white juice, taken from magrabe banana stem, as concrete admixture to improve mechanical and physicrvchemical properties of concrete has been studied. The compressive strength, bulk density the free lime liberated during hydration and the combined water content were determined. The results indicate that the admixture acts as a retarder in most cases and as accelerator in some ones. Also, the admixture effect on the corrosion resistance of the reinforcing steel against surrounding aggressive media has been investigated using galvanostatic polarization technique. The addition of 0.2% admixture leads to the more inhibition of the steel     

Phase equilibria of crude oils using the continuous thermodynamics approach

This paper deals with the application of continuous thermodynamics to light and heavy oil systems using the Peng- Robinson equation of state. The composition of the high molar mass components in a reservoir oil is described by a continuous distribution function of some characterizing quantity, e.g. molar mass or boiling temperature. Numerical Gaussian quadrature methods are used to generate pseudo-components and their mole fractions from distribution data. Several examples are presented for phase equilibria of solvent/crude oil systems. The results showed that semi-infinite distribution functions, such as the Γ function, cannot be applied to all cases, e.g. dew point calculations. The Gauss- Legendre quadrature method coupled with spline fitting worked best for heavy oil systems.     

An evolutionary lion optimization algorithm‐based image compression technique for biomedical applications

Recently, medical image compression becomes essential to effectively handle large amounts of medical data for storage and communication purposes. Vector quantization (VQ) is a popular image compression technique, and the commonly used VQ model is Linde–Buzo–Gray (LBG) that constructs a local optimal codebook to compress images. The codebook construction was considered as an optimization problem, and a bioinspired algorithm was employed to solve it. This article proposed a VQ codebook construction approach called the L2‐LBG method utilizing the Lion optimization algorithm (LOA) and Lempel Ziv Markov chain Algorithm (LZMA). Once LOA constructed the codebook, LZMA was applied to compress the index table and further increase the compression performance of the LOA. A set of experimentation has been carried out using the benchmark medical images, and a comparative analysis was conducted with Cuckoo Search‐based LBG (CS‐LBG), Firefly‐based LBG (FF‐LBG) and JPEG2000. The compression efficiency of the presented model was validated in terms of compression ratio (CR), compression factor (CF), bit rate, and peak signal to noise ratio (PSNR). The proposed L2‐LBG method obtained a higher CR of 0.3425375 and PSNR value of 52.62459 compared to CS‐LBG, FA‐LBG, and JPEG2000 methods. The experimental values revealed that the L2‐LBG process yielded effective compression performance with a better‐quality reconstructed image.     

Estolides from meadowfoam oil fatty acids and other monounsaturated fatty acids

The formation of estolides was detected during the studies on dimerization of meadowfoam oil fatty acids. By adjusting the reaction conditions, it was possible to produce monoestolides with little dimer or trimer formations. Estolides have potential use in lubricant, cosmetic and ink formulations and in plasticizers. This paper reports the conditions for production of estolides from mixed meadow-foam fatty acids, commercial oleic acid, high-oleic sun-flower oil fatty acids,cis-5,cis-13-docosadienoic acid, petroselinic acid and linoleic acid.     

Thermal decomposition and pore structure of pure and doped stannic oxide gel

The surface properties of a stannic oxide gel and its thermal dehydration products obtained both in vacuo and in the presence of air in the temperature range 100–600°C have been examined by N₂ adsorption. Phase and structural changes have been followed by differential thermal analysis and X-ray diffractometry. Complete pore structure analysis showed that samples dehydrated at or below 250°C were microporous. Above 250°C the pores were found to widen with increase of temperature, the widening occurring concurrently with the crystallisation process. Doping with cations of lower valency (Li⁺ and Al³⁺) than the host cation (Sn⁴⁺) had little effect on the pore structure and specific surface area for the low temperature samples (≤250°), whereas at higher temperatures, e.g. 600°C, it increased the specific area remarkably. The dope ions produce oxygen vacancies and hinder or retard sintering in SnO₂.     

Low Breakdown Voltage Varistors by Grain Boundary Diffusion of Molten Bi2O3 in ZnO

Diffusion of molten Bi₂O₃ into the grain boundaries of sintered, alumina-doped (0.23 and 0.7 mol%) ZnO pellets resulted in varistors with breakdown voltages in the 3–5 V range and nonlinearity coefficients of 10–24. The varistors were fabricated by spreading a thin layer of Bi₂O₃ powder on the surface of ZnO pellets and heating the combination to various temperatures (860–1155°C) and different times. The highest nonlinearity coefficients (20–24) and lowest breakdown voltages (3–5 V) were recorded in samples annealed at 860°C for 35 min. Longer annealing times and/or higher temperatures resulted in progressively higher breakdown voltages. Eventually the devices became insulating, which was attributed to the formation of an insulating Bi₂O₃ layer between the grains. Separate wetting experiments have shown that the penetration of Bi₂O₃ into ZnO grain boundaries was a strong function of alumina doping —the penetration rate was decreased by a factor of 5–7 as the ZnO was doped with as little as 0.2 mol% alumina. It is this slowing down of the penetration of the ZnO grain boundaries that is believed to be critical in the development of the low breakdown voltages observed.