Advanced flaw production method for in-service inspection qualification mock-ups

One of the key issues in in-service inspection qualification is the representativeness of the defects used in qualification specimens. The best representativeness is achieved with realistic defects. However, present specimen production techniques have some significant weaknesses, such as unrealistic defects or additional alterations induced in the surrounding material. Specimens manufactured, for example, by weld implantation or with weld solidification defects always result in one or more extra weld interfaces. These interfaces can be detected by NDT. To overcome problems with the current specimens, a new defect manufacturing technique was developed. The new technique produces natural, representative defects without introducing additional weld metal or other unwanted alterations to the specimen.The new method enables artificial production of single, separate fatigue cracks by thermal loading. The method is based on a natural thermal fatigue damage mechanism and enables production of real cracks directly into the samples. Cracks are produced without welding or machining and without any preliminary surface treatment or artificial initiator such as a notch or a precrack. Single crack or a network of cracks can be induced into the base material, welded areas, HAZ, weld claddings, threaded areas, T-joints, etc. The location, orientation and size of produced cracks can be accurately controlled. Produced cracks can be used to simulate different types of service-induced cracks such as thermal fatigue, mechanical fatigue and stress corrosion cracks. It is shown that artificially produced thermal fatigue cracks correspond well with the real, service-induced cracks and overcome the problems of traditional qualification specimen manufacturing techniques.     

A study of moderately thick quadrilateral plate elements based on the absolute nodal coordinate formulation

Finite element analysis using plate elements based on the absolute nodal coordinate formulation (ANCF) can predict the behaviors of moderately thick plates subject to large deformation. However, the formulation is subject to numerical locking, which compromises results. This study was designed to investigate and develop techniques to prevent or mitigate numerical locking phenomena. Three different ANCF plate element types were examined. The first is the original fully parameterized quadrilateral ANCF plate element. The second is an update to this element that linearly interpolates transverse shear strains to overcome slow convergence due to transverse shear locking. Finally, the third is based on a new higher order ANCF plate element that is being introduced here. The higher order plate element makes it possible to describe a higher than first-order transverse displacement field to prevent Poisson thickness locking. The term “higher order” is used, because some nodal coordinates of the new plate element are defined by higher order derivatives. The performance of each plate element type was tested by (1) solving a comprehensive set of small deformation static problems, (2) carrying out eigenfrequency analyses, and (3) analyzing a typical dynamic scenario. The numerical calculations were made using MATLAB. The results of the static and eigenfrequency analyses were benchmarked to reference solutions provided by the commercially available finite element software ANSYS. The results show that shear locking is strongly dependent on material thickness. Poisson thickness locking is independent of thickness, but strongly depends on the Poisson effect. Poisson thickness locking becomes a problem for both of the fully parameterized element types implemented with full 3-D elasticity. Their converged results differ by about 18 % from the ANSYS results. Corresponding results for the new higher order ANCF plate element agree with the benchmark. ANCF plate elements can describe the trapezoidal mode; therefore, they do not suffer from Poisson locking, a reported problem for fully parameterized ANCF beam elements. For cases with shear deformation loading, shear locking slows solution convergence for models based on either the original fully parameterized plate element or the newly introduced higher order plate element.     

Influence of titanium dioxide on crystallization behavior of an ethylene–propylene copolymer

Crystallization of an ethylene–propylene copolymer (E/P) filled with diverse weight percentages of titanium dioxide (TiO₂) was performed under isothermal and nonisothermal conditions to investigate the influence of the inorganic substance on the nucleation and growth mechanisms of the matrix. The overall and radial crystallization rates of the composite materials were measured using, respectively, differential scanning calorimetry (DSC) and optical microscopy. The nucleation density of E/P spherulites as a function of composition was investigated by scanning electron microscopy (SEM), revealing a nucleating effect of TiO₂. A comparison between the spherulitic texture of specimens showed a higher fineness of the composites relative to the neat matrix, whereas no changes of surface nucleation density were appreciable among composites within the explored compositional range. The thermal behavior is discussed in the light of the enhanced thermal conductivity of polymer composites, which conciliates the crystallization kinetics of the matrix, analyzed using the Avrami equation, to optical and SEM observations. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3409–3416, 2003     

Flexible multibody approach in forward dynamic simulation of locomotive strains in human skeleton with flexible lower body bones

A method for bone strain estimation is examined in this article. The flexibility of a single bone in an otherwise rigid human skeleton model has been studied previously by various authors. However, in the previous studies, the effect of the flexibility of multiple bones on the musculoskeletal model behavior was ignored. This study describes a simulation method that can be used to estimate the bone strains at both tibias and femurs of a 65-year-old Caucasian male subject. The verification of the method is performed by the comparison of the results with other studies available in literature. The results of the study show good correlation with the results of previous empirical studies. A damping effect of the flexible bones on the model is also studied in this paper.     

Efficient coupling of multibody software with numerical computing environments and block diagram simulators

Simulation of complex mechatronic systems like an automobile, involving mechanical components as well as actuators and active electronic control devices, can be accomplished by combining tools that deal with the simulation of the different subsystems. In this sense, it is often desirable to couple a multibody simulation software (for the mechanical simulation) with external numerical computing environments and block diagram simulators (for the modeling and simulation of nonmechanical components).     

The effects of paints and moisture content on the indoor air emissions from pinewood (Pinus sylvestris) boards

The emissions of volatile organic compounds (VOCs) from building materials may significantly contribute to indoor air pollution, and VOCs have been associated with odor annoyance and adverse health effects. Wood materials together with coatings are commonly used indoors for furniture and large surfaces such as walls, floors, and ceilings. This leads to high surface-to-volume ratios, and therefore, these materials may participate remarkably to the VOC levels of indoor environment. We studied emissions of VOCs and carbonyl compounds from pinewood (Pinus sylvestris) boards of 10% and 16% moisture contents (MC) with three paints using small-scale test chambers (27 L). The emissions from uncoated pinewood and paints (on a glass substrate) were tested as references. The 28-day experiment showed that the VOC emissions from uncoated pinewood were lower from sample with 16% MC. Painted pinewood samples showed lower emissions compared to paints on glass substrate. Additionally, paints on 16% MC pinewood exhibited lower emissions than on drier 10% MC wood. The emissions from painted pinewood samples were dominated by paint-based compounds, but the share of wood-based compounds increased over time. However, we noticed differences between the paints, and wood-based emissions were clearly higher with the most permeable paint.     

Antioxidant activity of phenolic and phenylethanoid glycosides from Teucrium polium L

In the present study, the chemical composition and antioxidant activities of Teucrium polium L. (Lamiaceae) were assessed. Fractionation of methanol extract obtained from the aerial parts of T. polium yielded one new phenylethanoid glycoside, named poliumoside B, together with four known flavonoids, two iridoid glycosides and a known poliumoside. The structures of all of these compounds were elucidated on the basis of spectroscopic data from 1D and 2D NMR experiments and MS spectral analyses. The antioxidant activities of the crude extracts and of the isolated compounds were evaluated through tests such as DPPH radical-scavenging capability, reducing power, xanthine oxidase inhibitory effect and inhibition of linoleic acid peroxidation. The highest antioxidant activity was found in the n-butanol extract, which also contained active polyphenols, thus suggesting that this plant could be used as a source of natural molecules, to provide safe antioxidant additives and nutraceuticals. The structure–activity relationships of the isolated compounds are also discussed.     

A mathematical method to estimate the equilibrium melting temperature from growth rate data

The regime transitions analysis is subject to all the limitations of the ordinary least squares method which is generally applied to the linearized form of the Lauritzen-Hoffman equation. Therefore, polymers growth rate has to be measured in a sufficiently wide temperature range to ensure a reliable kinetic analysis based on the secondary nucleation theory. Furthermore, an accurate value of the equilibrium melting temperature has to be used in order to achieve trustworthy thermodynamics outcomes, although this quantity may be affected by a high uncertainty. Here a method is proposed in order to verify directly from growth rate data the use of the most reliable value of the equilibrium melting temperature. The method is based on the comparison between the derivatives of the growth rate functions calculated by the Lauritzen-Hoffman equation using the outcomes of the regime analysis.