浅议生态环境监测机构的风险控制

现阶段,为了探索创新性的发展途径,生态环境监测机构应始终增强风险控制意识。应加强风险管理,立足于风险控制,以求不断健康发展。     

江西省水泥水化热情况分析与改善措施

水泥水化热是判断水泥产品质量的重要指标,对大型混凝土建设工程的质量影响很大。文中对江西省水泥企业的水泥水化热的情况进行了统计,并分析了影响的因素,提出了相应的改善措施。     

Diporphyrin tweezer for multichannel spectroscopic analysis of enantiomeric excess

Chiral 1,1’-binaphthyl-linked diporphyrin ‘tweezers’ (R)-1/(S)-1 and the corresponding zinc(II) complexes (R)-2/(S)-2 were prepared as chiral host molecules, and their utility for chiral analyses (especially enantiomeric excess (ee) determinations) were evaluated. Tris(1-n-dodecyl)porphyrins were used for the first time as the interacting units. Host capabilities of the diporphyrin tweezers were investigated by titrations with (R,R)- and (S,S)-cyclohexane-1,2-diamine (CHDA). The host molecules could be used as multichannel probes of ee by using UV-vis, circular dichroism (CD), fluorescence emission and ¹H nuclear magnetic resonance (¹H-NMR) methods. Chiral configurations could also be differentiated using CD or ¹H-NMR spectroscopy. All three optical techniques give good resolution of ee with reasonable sensitivity considering the low concentrations used (ca. 10⁻⁶ mol·L⁻¹). The ee determination of CHDA enantiomers using NMR spectroscopy is also possible because of the reasonably well separated resonances in the case of (R,R)- and (S,S)-CHDA. Non-metallated (R)-1/(S)-1 hosts could not be used to detect chiral information in a strongly acidic chiral guest. This work demonstrates the utility of 1,1’-binapthyl-linked chiral hosts for chiral analysis of ditopically interacting enantiomers.     

燃煤锅炉除尘专用滤料的开发

介绍机械制造厂燃煤锅炉的烟尘特点,分析滤料失效的原因,提出一套针对该工况的滤料解决方案。介绍针对复杂工况条件所选用的纤维种类以及复合面层原料成分配比的确定,最终选用针刺工艺加工并对该新产品的基本性能进行了测试分析。     

基于车联网的广播MAC协议性能分析

针对车载自组织网络IEEE 802.11协议中媒体访问控制(medium access control, MAC)层一维广播性能分析模型不适用于小竞争窗口的问题,提出一种考虑了连续冻结过程(consecutive freeze process, CFP)现象的二维马尔科夫模型。将CFP映射为连续发送分组过程和连续退避冻结过程,分析得出饱和状态下节点各状态转移的概率,并推导出节点广播分组的性能表达式。仿真结果表明,与一维分析模型相比,即使是在争用信道的竞争窗口较小情况下,该二维分析模型也能很好地预测饱和状态下节点广播分组的平均时延、吞吐量和成功接收率。     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

Critical parameters near the ferromagnetic-paramagnetic phase transition in La0.67–xYxBa0.23Ca0.1MnO3 compounds（x=0.10 and x=0.15）

The critical properties of the mixed manganite La0.67–x Y x Ba0.23Ca0.1Mn O3 with x=0.10 and x=0.15 around the paramagnetic(PM)-ferromagnetic(FM) phase transition were investigated through various techniques. These involved modified Arrott plots, Kouvel-Fisher method and Widom scaling relation. Magnetic data, analyzed in the critical region, using the above methods, yielded the critical exponents for(x=0.10) La0.57Y0.10Ba0.23Ca0.1Mn O3(β=0.312±0.002 and γ=1.147±0.003 at T C=299.23±0.05 K). Moreover, the estimated critical exponents of(x=0.15) La0.52Y0.15Ba0.23Ca0.1Mn O3 were β=0.286±0.004 and γ=0.943±0.002 at T C=289.53±0.06 K. The critical exponents’ values were close to the theoretical values of 3D-Ising model and tricritical mean-field model. These results suggested that the present composition should be close to a tricritical point in the La0.67–x Y x Ba0.23Ca0.1Mn O3 phase diagram. Expressing the field dependence as ΔS M∝H n allowed us to establish a relationship between the exponent n and the critical exponents of the material and to propose a phenomenological universal curve for the field dependence of ΔS M.