Environmental effects on the strength and impact damage resistance of alumina based oxide/oxide ceramic matrix composites

In this study the effects of high temperature and moisture on the impact damage resistance and mechanical strength of Nextel 610/alumina silicate ceramic matrix composites were experimentally evaluated. Composite laminates were exposed to either a 1050°C isothermal furnace-based environment for 30 consecutive days at 6 h a day, or 95% relative humidity environment for 13 consecutive days at 67°C. Low velocity impact, tensile and short beam strength tests were performed on both ambient and environmentally conditioned laminates and damage was characterized using a combination of non-destructive and destructive techniques. High temperature and humidity environmental exposure adversely affected the impact resistance of the composite laminates. For all the environments, planar internal damage area was greater than the back side dent area, which in turn was greater than the impactor side dent area. Evidence of environmental embrittlement through a stiffer tensile response was noted for the high temperature exposed laminates while the short beam strength tests showed greater propensity for interlaminar shear failure in the moisture exposed laminates. Destructive evaluations exposed larger, more pronounced delaminations in the environmentally conditioned laminates in comparison to the ambient ones. External damage metrics of the impactor side dent depth and area directly influenced the post-impact tensile strength of the laminates while no such trend between internal damage area and residual strength could be ascertained.     

Contracting, prompting, and reinforcing substance use disorder continuing care: A randomized clinical trial.

Although continuing care is strongly related to positive treatment outcomes for substance use disorder (SUD), participation rates are low and few effective interventions are available. In a randomized clinical trial with 150 participants (97% men), 75 graduates of a residential Veterans Affairs Medical Center SUD program who received an aftercare contract, attendance prompts, and reinforcers (CPR) were compared to 75 graduates who received standard treatment (STX). Among CPR participants, 55% completed at least 3 months of aftercare, compared to 36% in STX. Similarly, CPR participants remained in treatment longer than those in STX (5.5 vs. 4.4 months). Additionally, CPR participants were more likely to be abstinent compared to STX (57% vs. 37%) after 1 year. The CPR intervention offers a practical means to improve adherence among individuals in SUD treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Structural properties and electrical behaviour of thin silicon oxynitride layers

Thin SiO₂ and SiO_xN_y layers were grown on silicon using Rapid Thermal Processing (RTP) in either O₂ or N₂O ambient. Subsequent annealing or nitridation was performed in order to improve the electrical stability. The composition of the films, in particular the incorporation of nitrogen and hydrogen, has been studied. We obtained the distribution of states at the Si/insulator interface through the evaluation of CV measurements and investigated the charge trapping in the layers analysing the voltage–time behaviour during Fowler–Nordheim constant current injection. Furthermore, assuming a trap assisted tunneling mechanism, the influence of near interface trap states on the current voltage characteristic was used to derive an effective insulator state distribution.     

Prenatal diagnostic testing for familial dysautonomia using linked genetic markers

Familial dysautonomia (FD), a recessively inherited disease, has been mapped to chromosome 9q31. Highly polymorphic dinucleotide repeat markers flanking the genetic locus and at the same genetic location have been identified. We describe the prenatal diagnosis of FD using linkage and linkage disequilibrium analyses with these markers. Twelve families were analysed for informativeness and of these, seven went on to have prenatal testing (a total of eight fetuses tested). All of these fetuses were predicted to be heterozygous unaffected (FD carriers). Seven fetuses have come to term and are normal. In the absence of a recombinant proband, a panel of three proximal and three distal markers is sufficient to provide informative flanking markers and an 87-96 per cent likelihood of a highly predictive test. In an additional family at 1:4 risk for FD, no DNA was available from the propositus. This family was analysed using linkage disequilibrium to the #18 allele of the tightly linked marker D9S58 in conjunction with linkage analysis using data from two unaffected children. Prenatal diagnosis in this family indicated an affected fetus.     

The effect of SiO2 on high-temperature deformation and strength of zirconia-toughened alumina

At room temperature, SiO₂ additions may increase the fracture toughness, K _IC, by diminishing the tetragonal phase contents to about 50%, but with ground surfaces the influence on strength is small. A pronounced decrease in strength is observed with rising temperature in the high toughness region from 20°C to M _s, the starting temperature for martensitic transformation. Beyond M _s at lower toughness, the strength behaviour is very similar to nontransforming alumina ceramics, and an even modest increase of the silicate concentration intensively promotes propagation-controlled failure in the brittle creep region (> 900°C) and inelastic deformation. With less than 1% amorphous grain boundary phases, damage-free superplasticity is restricted to small strains of less than 10%. The significance of high-temperature data for tool applications is considered by cutting tests with high feeding rates.     

Paracetamol poisoning in the north east of England: presentation, early management and outcome

1. Paracetamol is increasingly involved in self-poisoning in the United Kingdom and remains a common cause of fatal poisoning. 2. To document the epidemiology and early management of paracetamol poisoning data were collected on consecutive patients with suspected paracetamol poisoning presenting to 6 hospitals in the North East of England over 12 weeks in 1994. 3. There were 400 presentations (attendance rate 1.14/10(3) population/yr) involving 343 persons (45% male). Paracetamol concentrations at 4 h correlated weakly with reported paracetamol dose (R = 0.49, P < 0.0001) and were similar comparing those treated and not treated by gastric decontamination. 4. In 38 (9%) cases paracetamol concentrations were above the appropriate nomogram treatment line, including 3% and 20% of patients who reported ingesting less than and more than 12 g respectively. In 21 patients acetylcysteine treatment was deferred until admission to the ward, the mean delay involved was 2.8 h. 5. One patient died, from arrhythmias caused by co-ingested dothiepin. 6. Paracetamol poisoning is common. Most cases do not have potentially toxic plasma paracetamol concentrations, but those who do often present late and antidotal treatment may be delayed inappropriately.     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Percolation and eddy currents in random close packed metal polymer composites

Bare and copper-coated polystyrene (PS) beads are mixed to give various volume fractions of electrically conducting and insulating spheres. This random mixture is subsequently sintered under pressure in a hot dye. The resulting solid is a polymer body in which thin (0.3 m) copper shells form a tightly packed cellular cluster which exhibits electrical continuity. This continuity is detected by inductive coupling via eddy currents to a coil at r.f. frequency. The percolation threshold for both two- and three-dimensional systems is observed by changing the thickness of the samples in a range in which it is comparable to the size of the beads. The observed thresholds for percolation are in good agreement with the theory.     

IT Service Climate—An Essential Managerial Tool to Improve Client Satisfaction With IT Service Quality

Although client satisfaction surveys can assess client satisfaction with IT service quality, they cannot easily be used to pinpoint how internal IT behaviors influence client satisfaction and prescribe solutions. This research fills the gap by introducing a concept— IT Service Climate—and a validated ten-item instrument that significantly explained client ratings of IT service quality. We recommend this measure as an effective diagnostic tool for managers aiming to improve quality and client satisfaction.