Latest Developments in the Batchwise Application of Hot-dyeing Reactive Dyes to Cellulosic Knitwear

A dyeing profile for a range of reactive dyes suitable for application to cellulosic knitwear is defined. Such a profile shows good level-dyeing, reproducibility and fastness properties together with potential for simplified dyeing processes.     

Frequency Dependence of Fatigue Life and Internal Heating of a Fiber-Reinforced/Ceramic-Matrix Composite

The influence of loading frequency on the fatigue life and internal (frictional) heating of unidirectional SiC-fiber/ calcium aluminosilicate-matrix composites was investigated at room temperature. Specimens were subjected to tension–tension fatigue at sinusoidal loading frequencies from 25 to 350 Hz and maximum fatigue stresses of 180 to 240 MPa. The key findings of the study were that (1) fatigue life decreased sharply as the loading frequency was increased, (2) for all loading frequencies, fatigue failures occurred at stress levels that were significantly below the monotonic proportional limit stress of ∼285 MPa, and (3) pronounced internal heating occurred during fatigue, with the surface temperature of the fatigue specimens increasing by 160 K during 350-Hz fatigue at a peak stress of 240 MPa.     

A vibrational study of the activation sequence of C–H and C–C bonds of isobutene and 1-butene on Mo(110) and (4 × 4)-C/Mo(110) surfaces

The thermal decomposition pathways of isobutene and 1-butene on both Mo(110) and 4 × 4-C/Mo(110) surfaces have been studied using high-resolution electron energy loss spectroscopy (HREELS) in order to highlight the substantially different activities of these two surfaces towards the cleavage of C–H and C–C bonds. On clean Mo(110), the CH₂ group of isobutene decomposes upon heating to 150 K, producing either a /-bonded isobutenylidene [(CH₃)₂CCH] species or a 1,1-di-/-bonded isobutenyl [(CH₃)₂CC] species. Upon further heating, extensive C–H bond scission occurs to form hydrocarbon fragments which do not contain CH₃ or CH₂ groups, but appear to have largely intact carbon skeletons. By contrast, isobutene is molecularly adsorbed on the carbide-modified surface at 150 K. Further heating produces isobutylidyne [(CH₃)₂HCC] by 300 K, which subsequently decomposes via C–C bond scission to generate surface methyl groups. The different activation sequence of the C–H and C–C bonds of isobutene on clean and carbide-modified Mo(110) surfaces is also qualitatively confirmed by comparative studies of 1-butene on the two surfaces.     

Dehydrocyclization of 1-hexene to benzene on Cu3Pt(111)

The disproportionation ofn-butane (and of isobutane) was catalyzed by sulfated zirconium oxide containing 1.5 wt% Fe, 0.5 wt% Mn, and 4.0 wt% sulfate at 2.0 atm and temperatures in the range of 30–60C. The reaction accompanies isomerization, which under some conditions is as much as one or two orders of magnitude faster than disproportionation. The conversion to each of the products increased with time on stream in a flow reactor, and then declined. The time on stream for maximum conversion was the same for each product. The results suggest that the disproportionation and isomerization reactions proceed through a common C₈ intermediate. Rates of the disproportionation reaction were determined at the time on stream corresponding to the maximum conversion at each temperature; for example, the rate of conversion ofn-butane into isopentane at 60C with ann-butane partial pressure of 0.58 atm was about 1×10^–7 mol/(g of catalyst s).     

INFORMATION LITERACY IN A RESEARCHER'S LEARNING LIFE: THE SEVEN AGES OF RESEARCH

This article uses data from research conducted in the course of writing a book on the needs, wants and characteristics of researchers to examine how researchers view themselves and the research process. As a result of this, the Seven Ages of Research model was developed which categorises a researcher's learning life into a series of discrete stages. The article explores learning needs relevant to each age in the learning life and links them to the development of information literacy. The authors explore the polarisation that exists between what researchers think research is about and what they believe the library can offer them, and suggest that information literacy needs to be seen as involving a change in understanding of, and attitude to, the world of information, as well as the nature of those information needs. Finally, they explore the librarian's role in an e-environment which has changed the way researchers work and identify some of the challenges facing library and information services professionals in the future in supporting researchers throughout their learning lives.     

tweezercalib 2.0: Faster version of MatLab package for precise calibration of optical tweezers

We present a vectorized version of the MatLab (MathWorks Inc.) package tweezercalib for calibration of optical tweezers with precision. The calibration is based on the power spectrum of the Brownian motion of a dielectric bead trapped in the tweezers. Precision is achieved by accounting for a number of factors that affect this power spectrum, as described in vs. 1 of the package [I.M. Toli?-Nørrelykke, K. Berg-Sørensen, H. Flyvbjerg, Matlab program for precision calibration of optical tweezers, Comput. Phys. Comm. 159 (2004) 225-240]. The graphical user interface allows the user to include or leave out each of these factors. Several “health tests” are applied to the experimental data during calibration, and test results are displayed graphically. Thus, the user can easily see whether the data comply with the theory used for their interpretation. Final calibration results are given with statistical errors and covariance matrix.

New version program summary

Title of program: tweezercalibCatalogue identifier: ADTV_v2_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADTV_v2_0Program obtainable from: CPC Program Library, Queen's University of Belfast, N. IrelandReference in CPC to previous version: I.M. Toli?-Nørrelykke, K. Berg-Sørensen, H. Flyvbjerg, Comput. Phys. Comm. 159 (2004) 225Catalogue identifier of previous version: ADTVDoes the new version supersede the original program: YesComputer for which the program is designed and others on which it has been tested: General computer running MatLab (Mathworks Inc.)Operating systems under with the program has been tested: Windows2000, Windows-XP, LinuxProgramming language used: MatLab (Mathworks Inc.), standard licenseMemory required to execute with typical data: Of order four times the size of the data fileHigh speed storage required: noneNo. of lines in distributed program, including test data, etc.: 135 989No. of bytes in distributed program, including test data, etc.: 1 527 611Distribution format: tar. gzNature of physical problem: Calibrate optical tweezers with precision by fitting theory to experimental power spectrum of position of bead doing Brownian motion in incompressible fluid, possibly near microscope cover slip, while trapped in optical tweezers. Thereby determine spring constant of optical trap and conversion factor for arbitrary-units-to-nanometers for detection system.Method of solution: Elimination of cross-talk between quadrant photo-diode's output channels for positions (optional). Check that distribution of recorded positions agrees with Boltzmann distribution of bead in harmonic trap. Data compression and noise reduction by blocking method applied to power spectrum. Full accounting for hydrodynamic effects: Frequency-dependent drag force and interaction with nearby cover slip (optional). Full accounting for electronic filters (optional), for “virtual filtering” caused by detection system (optional). Full accounting for aliasing caused by finite sampling rate (optional). Standard non-linear least-squares fitting. Statistical support for fit is given, with several plots facilitating inspection of consistency and quality of data and fit.Summary of revisions: A faster fitting routine, adapted from [J. Nocedal, Y.x. Yuan, Combining trust region and line search techniques, Technical Report OTC 98/04, Optimization Technology Center, 1998; W.H. Press, B.P. Flannery, S.A. Teukolsky, W.T. Vetterling, Numerical Recipes. The Art of Scientific Computing, Cambridge University Press, Cambridge, 1986], is applied. It uses fewer function evaluations, and the remaining function evaluations have been vectorized. Calls to routines in Toolboxes not included with a standard MatLab license have been replaced by calls to routines that are included in the present package. Fitting parameters are rescaled to ensure that they are all of roughly the same size (of order 1) while being fitted. Generally, the program package has been updated to comply with MatLab, vs. 7.0, and optimized for speed.Restrictions on the complexity of the problem: Data should be positions of bead doing Brownian motion while held by optical tweezers. For high precision in final results, data should be time series measured over a long time, with sufficiently high experimental sampling rate: The sampling rate should be well above the characteristic frequency of the trap, the so-called corner frequency. Thus, the sampling frequency should typically be larger than 10 kHz. The Fast Fourier Transform used works optimally when the time series contain n² data points, and long measurement time is obtained with n>12-15. Finally, the optics should be set to ensure a harmonic trapping potential in the range of positions visited by the bead. The fitting procedure checks for harmonic potential.Typical running time: SecondsUnusual features of the program: NoneReferences: The theoretical underpinnings for the procedure are found in [K. Berg-Sørensen, H. Flyvbjerg, Power spectrum analysis for optical tweezers, Rev. Sci. Ins. 75 (2004) 594-612].     

Quality control and due diligence in project management: Getting decisions right by taking the outside view

This paper explores how theories of the planning fallacy and the outside view may be used to conduct quality control and due diligence in project management. First, a much-neglected issue in project management is identified, namely that the front-end estimates of costs and benefits – used in the business cases, cost–benefit analyses, and social and environmental impact assessments that typically support decisions on projects – are commonly significantly different from actual ex post costs and benefits, and are therefore poor predictors of the actual value and viability of projects. Second, it is discussed how Kahneman and Tversky's theories of the planning fallacy and the outside view may help explain and remedy this situation through quality control of decisions. Third, it is described what quality control and due diligence are in the context of project management, and an eight-step procedure is outlined for due diligence based on the outside view. Fourth, the procedure is tested on a real-life, multibillion-dollar project, organized as a public–private partnership. Finally, Akerlof and Shiller's recent discussion in economics of “firing the forecaster” is discussed together with its relevance to project management. In sum, the paper demonstrates the need, the theoretical basis, a practical methodology, and a real-life example for how to de-bias project management using quality control and due diligence based on the outside view.     

Simulation based analysis and an application to an offshore oil and gas production system of the Natvig measures of component importance in repairable systems

In the present paper the Natvig measures of component importance for repairable systems, and its extended version are analyzed for two three-component systems and a bridge system. The measures are also applied to an offshore oil and gas production system. According to the extended version of the Natvig measure a component is important if both by failing it strongly reduces the expected system uptime and by being repaired it strongly reduces the expected system downtime. The results include a study of how different distributions affect the ranking of the components. All numerical results are computed using discrete event simulation. In a companion paper [Huseby AB, Eide KA, Isaksen SL, Natvig B, Gåsemyr, J. Advanced discrete event simulation methods with application to importance measure estimation. 2009, submitted for publication] the advanced simulation methods needed in these calculations are described.     

Future Scenarios: What are the Future Services and Applications?

With the change of paradigm within user-machine interaction, there is an increasing demand for seamless interoperability between different technologies as well as more intuitive ways of utilizing the applications on the devices. This implies that the underlying technologies must support the appropriate bandwidth, mobility and quality at the right cost in order for the end-user to perceive the infrastructure appropriate for the services and corresponding applications of the future. In addition, it is required that interoperability will be realized at the semantic level and not just the syntactical level. The purpose of the paper is to present the authors’ thoughts of a new Information and Communication Technology paradigm and to highlight what might have an impact on the realization/deployment of such a paradigm.