A novel open-loop high-speed CMOS sample-and-hold

A new open-loop high-speed CMOS sample-and-hold is presented. Based on new method for further reduction of voltage-dependent charge injection, a new CMOS sample-and-hold was designed. Simulation results confirm the effectiveness of this method. Over 10 dB improvement in signal-to-noise ratio, compared to the signal-to-noise ratio of conventional bottom plate sampling S/Hs was achieved with this method. A comparison between newly designed S/H and the bottom-plate sampling S/H is presented.     

Fuzzy reliability analysis of nanocomposite ZnO beams using hybrid analytical-intelligent method

A hybrid analytical-intelligent approach is proposed for fuzzy reliability analysis of the composite beams reinforced by zinc oxide (ZnO) nanoparticle. The fuzzy reliability index corresponding to buckling failure mode of nanocomposite beam under thickness-direction external voltage is computed based on three-levels: (1) fuzzy analysis, (2) reliability analysis and (3) analytical buckling analysis. In fuzzy analysis level, an improved gravitational search algorithm has been applied to determine uncertainty interval for membership levels of reliability index. The adaptive formulation with a dynamical self-adjusting process is used for reliability analysis level based on conjugate first-order reliability method (FORM). The self-adjusting term in conjugate sensitivity vector is used to satisfy the sufficient descent condition for controlling instability of FORM formula while the proposed conjugate scalar factor is computed less than the original conjugate FORM, thus it may be provided with the efficient results for the convex problem. The new and previous sensitivity vectors obtained by conjugate and steepest descent vectors dynamically adjusted the proposed conjugate factor. In the buckling analysis level, an exponential theory in conjunction with the method of energy is utilized. Fuzzy random variables including applied voltage, the volume fraction of ZnO, thickness of beam, spring constant and shear constant of the foundation are considered in studied nanocomposite beam. Survey results indicated that the proposed method can provide stable and acceptable fuzzy membership functions for parametric study. Moreover, the ratio of length to thickness and spring constant of foundation are the more sensitive parameters which affect fuzzy reliability index significantly.

     

Use of surface modified recycled rubber particles for toughening of epoxy polymers

The objective of this research is to investigate the feasibility of using surface treated recycled rubber particles for toughening of epoxy polymers. These particles are obtained through grinding of scrap tires followed by oxidizing the surface of the particles in a reactive gas atmosphere. Surface treated recycled rubber particles with a nominal particle size of approximately 75 μm and a commonly used reactive liquid elastomer, CTBN, have been incorporated in a DGEBA epoxy resin. It has been shown that the recycled rubber particles are not as effective as CTBN in toughening of the epoxy matrix. However, blending of the two modifiers results in a synergistic toughening. Microscopy reveals that, when used alone, recycled rubber particles simply act as large stress concentrators and modestly contribute to toughening via crack deflection and microcracking. In the presence of micron size CTBN particles, which cavitate and induce massive shear yielding in the matrix, however, the recycled particles “stretch” the plastic deformation to distances far from the crack tip. This mechanism causes plastic zone branching and provides an unexpectedly high fracture toughness value. This study, therefore, provides a practical approach for manufacturing engineering polymer blends utilizing the surface modified recycled rubber particles.     

Modification of glassy carbon electrode with multi-walled carbon nanotubes and iron(III)-porphyrin film: Application to chlorate, bromate and iodate detection

In this study, multi-wall carbon nanotubes (MWCTs) is evaluated as a transducer, stabilizer and immobilization matrix for the construction of amperometric sensor based on iron-porphyrin. 5,10,15,20-Tetraphenyl-21H,23H-porphine iron(III) chloride (Fe(III)P) adsorbed on MWCNTs immobilized on the surface of glassy carbon electrode. Cyclic voltammograms of the Fe(III)P-incorporated-MWCNTs indicate a pair of well-defined and nearly reversible redox couple with surface confined characteristics at wide pH range (2-12). The surface coverage (Γ) and charge transfer rate constant (k_s) of Fe(III)P immobilized on MWCNTs were 7.68 × 10⁻⁹ mol cm⁻² and 1.8 s⁻¹, respectively, indicating high loading ability of MWCNTs for Fe(III)P and great facilitation of the electron transfer between Fe(III)P and carbon nanotubes immobilized on the electrode surface. Modified electrodes exhibit excellent electrocatalytic activity toward reduction of ClO₃⁻, IO₃⁻ and BrO₃⁻ in acidic solutions. The catalytic rate constants for catalytic reduction of bromate, chlorate and iodate were 6.8 × 10³, 7.4 × 10³ and 4.8 × 10² M⁻¹ s⁻¹, respectively. The hydrodynamic amperometry of rotating-modified electrode at constant potential versus reference electrode was used for detection of bromate, chlorate and iodate. The detection limit, linear calibration range and sensitivity for chlorate, bromate and iodate detections were 0.5 μM, 2 μM to 1 mM, 8.4 nA/μM, 0.6 μM, 2 μM to 0.15 mM, 11 nA/μM, and 2.5 μM, 10 μM to 4 mM and 1.5 nA/μM, respectively. Excellent electrochemical reversibility of the redox couple, good reproducibility, high stability, low detection limit, long life time, fast amperometric response time, wide linear concentration range, technical simplicity and possibility of rapid preparation are great advantages of this sensor. The obtained results show promising practical application of the Fe(III)P-MWCNTs-modified electrode as an amperometric sensor for chlorate, iodate and bromate detections.     

Characterization of minocycline loaded chitosan/polyethylene glycol/glycerol blend films as antibacterial wound dressings

Wound care has been a challenging subject for medical teams and researchers. Bacterial infections are one of the most serious complications in injured skins that often affect healing process. Antibacterial wound dressings can be used to facilitate wound healing process. The purpose of this study is to fabricate chitosan (Chito)/polyethylene glycol (PEG) antibacterial wound dressing doped with minocycline, and to evaluate the influence of composition ratio on the blending properties of the films. To improve the mechanical properties of these films, we examined various amounts of glycerol as a plasticizer. Moreover, we investigated morphological and mechanical aspects, water uptake, degradation, water vapor transmission and wettability properties of the films prepared with various ratios of Chito/PEG/Gly. Assessment of mechanical properties revealed that film containing 80:20 ratio Chito/PEG with 40 PHR Gly content exhibits the highest ultimate tensile strength and elongation at break (9.74 MPa and 45.73% respectively). Furthermore, results demonstrated that upon increasing PEG and Gly contents, degradability and hydrophilicity of the films increased whereas water uptake decreased. Water vapor transmission rate of the films was close to the range of 530–1200 g/m²d, indicating that the as formed films are possible candidates for dressing low exudate wounds or burns. Minocycline loaded films exhibited a biphasic drug release profile and it was more effective on gram-positive bacteria than on gram-negative bacteria. The polymeric film with the highest amount of loaded drug (2%) exhibited insignificant cytotoxicity (88%) against normal fibroblast cell line.     

Adaptive content-and-deadline aware chunk scheduling in mesh-based P2P video streaming

In mesh-based Peer-to-Peer (P2P) live video streaming systems packet scheduling is an important factor in overall video playback quality. In mesh based P2P video streaming systems, each video sequence is divided into chunks, which are then distributed by multiple suppliers to the receivers. The suppliers need to be coordinated by the receiver through specifying a transmission schedule for each of them. Many previous studies on scheduling of P2P streaming tend to mainly focus on networking issues which strongly depend on a particular P2P architecture such as tree or mesh. These algorithms suffer from some design issues: 1) they are too complex to deploy, 2) they do not take video characteristics into account and 3) they do not have sender-side transmission policy. To address all three of these problems, we propose a new chunk scheduling scheme which consists of two parts: i) receiver-side scheduler and ii) sender-side transmission order scheme. The proposed receiver-side scheduler considers the contribution level of each video frame as well as the frame’s urgency in order to define a priority for each video frame. It attempts to request frames with highest priority from peers which can deliver them in a shorter time. We also design a new chunk transmission order scheme that decides which requested chunk will be sent out first based on its importance to the requesting neighbor. Our simulation results show that the proposed scheduling scheme improves the overall quality of the perceived video in mesh-based P2P video streaming architectures substantially.     

Symbiotic artificial immune system

Artificial Immune System algorithms use antibodies that fully specify the solution of an optimization, learning, or pattern recognition problem. By being restricted to fully specified antibodies, an AIS algorithm cannot make use of schemata or classes of partial solutions, while sub solutions can help a lot in faster emergence of a totally good solution in many problems. To exploit schemata in artificial immune systems, this paper presents a novel algorithm that combines traditional artificial immune systems and symbiotic combination operator. The algorithm starts searching with partially specified antibodies and gradually builds more and more specified solutions till it finds complete answers. The algorithm is compared with CLONALG algorithm on several multimodal function optimization and combinatorial optimization problems and it is shown that it is faster than CLONALG on most problems and can find solutions in problems that CLONALG totally fails.     

ConsilientSFL: using preferential voting system to generate combinatorial ranking metrics for spectrum-based fault localization

Spectrum-based fault localization (SFL) techniques have shown considerable effectiveness in localizing software faults. They leverage a ranking metric to automatically assign suspiciousness scores to certain entities in a given faulty program. However, for some programs, the current SFL ranking metrics lose effectiveness. In this paper, we introduce ConsilientSFL that is served to synthesize a new ranking metric for a given program, based on a customized combination of a set of given ranking metrics. ConsilientSFL can be significant since it demonstrates the usage of voting systems into a software engineering task. First, several mutated, faulty versions are generated for a program. Then, the mutated versions are executed with the test data. Next, the effectiveness of each existing ranking metric is computed for each mutated version. After that, for each mutated version, the computed existing metrics are ranked using a preferential voting system. Consequently, several top metrics are chosen based on their ranks across all mutated versions. Finally, the chosen ranking metrics are normalized and synthesized, yielding a new ranking metric. To evaluate ConsilientSFL, we have conducted experiments on 27 subject programs from Code4Bench and Siemens benchmarks. In the experiments, we found that ConsilientSFL outperformed every single ranking metric. In particular, for all programs on average, we have found performance measures recall, precision, f-measure, and percentage of code inspection, to be nearly 7, 9, 12, and 5 percentages larger than using single metrics, respectively. The impact of this work is twofold. First, it can mitigate the issue with the choice and usage of a proper ranking metric for the faulty program at hand. Second, it can help debuggers find more faults with less time and effort, yielding higher quality software.

     

UML-CI: A reference model for profiling critical infrastructure systems

The study of critical infrastructure systems organization and behavior has drawn great attention in the recent years. This is in part due to their great influence on the ordinary life of every citizen. In this paper, we study critical infrastructures’ characteristics and propose a reference model based on the Unified Modeling Language (UML). This reference model attempts to provide suitable means for the task of modeling an infrastructure system through offering five major metamodels. We introduce each of these metamodels and explain how it is possible to integrate them into a unique representation to characterize various aspects of an infrastructure system. Based on the metamodels of UML-CI, infrastructure system knowledge bases can be built to aid the process of infrastructure system modeling, profiling, and management.