Machining High-Temperature Alloys by Means of Solid Ceramic End Mills

Russian Engineering Research - The cutting of high-temperature alloys is considered. The performance of solid ceramic end mills is assessed by experimental comparison of five different designs with...     

Tribological behaviour of a 3Y-TZP/Ta ceramic-metal biocomposite against ultrahigh molecular weight polyethylene (UHMWPE)

This study aims to evaluate the tribological behaviour of 3Y-TZP/Ta (20 vol%) ceramic-metal composites and 3Y-TZP monolithic ceramic prepared by spark plasma sintering (SPS) against ultrahigh molecular weight polyethylene (UHMWPE). According to the results of pin (UHMWPE)-on-flat wear test under dry conditions, the UHMWPE – 3Y-TZP/Ta system exhibited lower volume loss and friction coefficient than the UHMWPE – monolithic ceramic combination due to the presence of an autolubricating layer that provides sufficient lubrication for reducing the friction. Owing to the lubrication of the liquid media, under wet conditions obtained using simulated body fluid (SBF), similar behaviour is observed in both cases. Additionally, the ceramic and biocomposite materials were subjected to a low temperature degradation (LTD) process (often referred to as “ageing”) to evaluate the changes in the tribological behaviour after this treatment. In this particular case, the wear properties of the UHMWPE-biocomposite system were found to be less influenced by ageing in contrast to the case of the UHMWPE-zirconia monolithic material. In addition to their exceptional mechanical performance, 3Y-TZP/Ta composites also showed high resistance to low temperature degradation and good tribological properties, making them promising candidates for biomedical applications, especially for orthopaedic implants.     

Influence of hydrogen on the thermoelectric voltage signal in a Pt/WO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/6<Emphasis Type="Italic">H</Emphasis>-SiC/Ni/Pt layered structure

The possibility of detecting H₂ by registering the thermal electromotive force signal, which arises between the surfaces of 6H-SiC plates with a thickness of 400 μm, is established. The working surface of the plates is modified by deposition of a WO _x film and catalytic Pt. An ohmic contact (Ni/Pt) is created on the rear surface of the plate, and this surface is maintained at a stabilized temperature of 350°C. The temperature gradient through the plate thickness arises due to the cooling of the working surface with the air medium. The delivery of H₂ into this medium up to a concentration of 2% gives rise to a 15-fold increase in the electric signal, which considerably exceeds the Pt/WO _x /SiC/Ni/Pt system’s response registered in the usual way by measuring the current–voltage dependence. In this case, an additional power source for the registration of the thermal electromotive force is not required.     

Modification of the chemical composition,morphology, and antireflection properties of WSe x films formed by pulsed laser deposition

We have studied the possibility of controlling important structural characteristics of WSe _x films, which belong to the class of layered materials and have good prospects for application in modern nano- and optoelectronic devices. It is established that, by using thermal treatment and ion irradiation during pulsed laser deposition (PLD) in the shadow of an antidroplet shield, it is possible to vary the Se/W atomic ratio from 5 to 1.5, change the character of atomic packing, and obtain films with either smooth or rough surfaces. An increase in the height of parabolic protrusions on the surface up to 200–500 nm leads to a decrease in the optical reflection coefficient in a broad wavelength range from 30% (typical of smooth films) to 6%, which can favor a significant increase in the efficiency of solar cells based on semiconductor films of this type.     

Correlation of Vibroacoustic Signal with Ceramic Component Wear During Frictional Interaction with a Steel Disc

Refractories and Industrial Ceramics - Complete correlation between dimensions of the wear area on specimens made of oxide-carbide ceramics and the root-mean-square value of vibration acceleration...     

Spark Plasma Sintering of Al2O3-Ceramic Workpieces for Small End Milling Cutters

Refractories and Industrial Ceramics - Features of the effect of sintering temperature, pressure and duration of isothermal exposure during spark plasma sintering on the structure of Al2O3 ceramics...     

Solid Ceramic Toroidal End Mill

Russian Engineering Research - The possibility of designing solid ceramic end mills with different geometry is considered. A mathematical model is developed for the cutting section of the mill on...