Structure and Lewis acid sites in alumoxane compounds

With a view to clarifying the characteristics in alumoxanes as an effective Lewis acid cocatalyst in homogeneous olefin polymerization, ab initio quantum chemical calculations were carried out for model fragment structures of the compound. The relative strength of Lewis acidity was compared for different aluminum sites and the energetics in the ligand exchange process with group IV metallocene complex were discussed.     

Surface-modified mesoporous silicas as recyclable adsorbents of an endocrine disrupter, bisphenol A

Surface-modified mesoporous silicas (MSs) were investigated for recyclable adsorption of an endocrine disrupter, bisphenol A (BPA). Surface-modified MSs were prepared by (i) post-synthesis surface modification of MSs using surface hydroxyl groups and organosilanes (m-MS) and by (ii) co-condensation of tetraethoxysilane and the corresponding organosilanes (d-MS). Infrared measurements indicated that organic groups mainly existed on the surface of m-MS, which resulted in a surface characterized by high hydrophobicity. Both organic groups and isolated hydroxyl groups existed on the surface of d-MS, resulting in both hydrophobicity and hydrophilicity on the surface. The amount of BPA adsorbed on surface-modified MSs per organic group was similar for m-MS and d-MS, however, the d-MS established equilibrium for BPA adsorption faster than m-MS, as measured by UV-vis spectra. A larger amount of BPA per surface area could be adsorbed on carbon materials than on the surface-modified MSs, however, the regeneration of carbon materials by washing could not be done easily. The surface-modified MSs retain adsorption capacity for BPA after several regeneration cycles, demonstrating that the surface-modified MSs are effective recyclable adsorbents of the endocrine disrupter, bisphenol A.     

Effects of distribution of surface slopes and flow pressures of contact asperities on contact between solid surfaces

An analysis of the mechanism of contact between two solids was carried out considering the distribution of the surface slopes of conical asperities and the variation of the flow pressure of each contact asperity due to work-hardening and the work-hardened layer of the softer surface. From the analysis, where the distributions of the surface heights and the surface slopes are Gaussian the number of contact points decreases and their mean radius increases with increasing ranges of the distribution of the surface slopes for a given value of the mean surface slope. The number of contact points, the total real area, the separation and the radius of the contact points are influenced by the variation of the flow pressure of each contact asperity due to work-hardening of the contact asperities or the work-hardened layer of the softer surface.The validity of the theory was checked by comparing the theoretical and experimental results of the number, the separation and the distribution of the radii of contact points.     

Behavioral characteristics of nanosecond pulsed discharge in coaxial electrodes

The environmental improvements by pulsed discharge plasma, a type of nonthermal plasma, have received much attention all over the world. The observation of discharge plasmas is beneficial for better understanding of the plasma physics of this growing field. Recently, nanosecond (ns) pulsed discharge with a short pulse duration of 5 ns achieved the higher energy efficiency on ozone generation and NO removal. However, the underlying mechanisms of these high efficiencies remain unclear. In the present study, the effects of electrode geometry on propagation process of ns pulsed discharge in coaxial electrodes were investigated using an ICCD camera. As the results, increasing wire diameters from 0.2 to 2.0 mm lead the different streamer discharge parameters; propagation velocity of streamer heads from 4.8 mm/ns to 12.5 mm/ns, peak of discharge current from 243 to 328 A, respectively. Therefore, it is concluded that the wire diameter is one of the paramount parameters to control the characteristics of the ns pulsed streamer discharge.     

Direct measurements of interfacial shear strength of multi-walled carbon nanotube/PEEK composite using a nano-pullout method

This paper presents a proposal of a simple and easy method to evaluate the interfacial shear strength (IFSS) of CNT-dispersed polymer composites. An individual multi-wall carbon nanotube (MWNT) was pulled out from a MWNT-dispersed/PEEK composite using a nano-pullout testing system installed in an SEM. The tensile load was measured using the elastic deformation of an AFM cantilever. The pull-out length was controlled by making a through-thickness hole near the specimen edge using a focused ion beam (FIB) system. The IFSS of a MWNT/PEEK composite was measured as 3.5-14 MPa, which agrees with the IFSS estimated from the macroscopic stress-strain behavior of the MWNT/PEEK composites.     

Nondestructive readout of a photorefractive hologram by phase-conjugate copying in a one-crystal configuration

We propose a novel phase-conjugate copying method for nondestructive readout of a volatile photorefractive hologram. In the one-crystal configuration, two holographic memories and a mutually pumped phase conjugator (MPPC) are formed within a single photorefractive crystal, instead of using multiple crystals. Two memories share the same hologram and complement each other in refreshing the hologram. A MPPC suppresses fanning noise and automatically aligns the wavefront of the reference and readout beams. We found the optimum configuration to achieve nondestructive readout from calculations and geometric consideration. In the experiments with a BaTiO(3) crystal, a continuous readout of 20 times longer than the recording time was achieved.     

Hydride Anion Substitution Boosts Thermoelectric Performance of Polycrystalline SrTiO3 via Simultaneous Realization of Reduced Thermal Conductivity and High Electronic Conductivity

The development of environmentally benign thermoelectric materials with high energy conversion efficiency (ZT) continues to be a long-standing challenge. So far, high ZT has been achieved using heavy elements to reduce lattice thermal conductivity (κ_lat). However, it is not preferred to use such elements because of their environmental load and high material cost. Here a new approach utilizing hydride anion (H⁻) substitution to oxide ion is proposed for ZT enhancement in thermoelectric oxide SrTiO₃ bulk polycrystals. Light element H⁻ substitution largely reduces κ_lat from 8.2 W/(mK) of SrTiO₃ to 3.5 W/(mK) for SrTiO_3−xH_x with x = 0.216. The mass difference effect on phonon scattering is small in the SrTiO_3−xH_x, while local structure distortion arising from the distributed Ti−(O,H) bond lengths strongly enhances phonon scattering. The polycrystalline SrTiO_3−xH_x shows high electronic conductivity comparable to La-doped SrTiO₃ single crystal because the H⁻ substitution does not form a grain boundary potential barrier and thus suppresses electron scattering. As a consequence, SrTiO_3−xH_x bulk exhibits maximum ZT = 0.11 at room temperature and the ZT value increases continuously up to 0.22 at T = 657 K. The H⁻ substitution idea offers a new approach for ZT enhancement in thermoelectric materials without utilizing heavy elements.     

Guidelines for Writing and Obtaining RILEM Approval for RILEM Technical Recomendations

RILEM Bulletin

Guidelines for Writing and Obtaining RILEM Approval for RILEM Technical Recomendations     

Influence of interface layers on Ag thin film growth

We prepared Ag thin films on SiO2/Si substrates, with and without a subnanometer-thick organic interface layer of 3-mercaptopropyltrimethoxysilane (MPTMS). The surface morphology and electrical resistivity of these films were investigated and compared. Ag films grown with an MPTMS layer were relatively flat, resulting in a smaller critical thickness. This was probably because migration of Ag atoms on the substrate was suppressed by interactions between the Ag atoms and the thiol moiety. The deposition rate and terminating group of the organic interface layer also influenced the Ag film growth.