Optimization of Pathogen Capture in Flowing Fluids with Magnetic Nanoparticles

Magnetic nanoparticles have been employed to capture pathogens for many biological applications; however, optimal particle sizes have been determined empirically in specific capturing protocols. Here, a theoretical model that simulates capture of bacteria is described and used to calculate bacterial collision frequencies and magnetophoretic properties for a range of particle sizes. The model predicts that particles with a diameter of 460 nm should produce optimal separation of bacteria in buffer flowing at 1 L h⁻¹. Validating the predictive power of the model, Staphylococcus aureus is separated from buffer and blood flowing through magnetic capture devices using six different sizes of magnetic particles. Experimental magnetic separation in buffer conditions confirms that particles with a diameter closest to the predicted optimal particle size provide the most effective capture. Modeling the capturing process in plasma and blood by introducing empirical constants (c_e), which integrate the interfering effects of biological components on the binding kinetics of magnetic beads to bacteria, smaller beads with 50 nm diameters are predicted that exhibit maximum magnetic separation of bacteria from blood and experimentally validated this trend. The predictive power of the model suggests its utility for the future design of magnetic separation for diagnostic and therapeutic applications.     

Measurement of the required cross-polar protection ratio in G-PALTV FM satellite transmissions planning

A measurement campaign using live TV broadcast satellite signals and receiving commercial equipment has been carried out to study the required cross-polar protection ratio at the receiving antenna in satellite transmission planning. This experiment provides useful and realistic conclusions for the optimum spectrum allocation of TV channels in broadcasting satellite systems, as for example, the frequency offset required between cross-polar channels depending on the cross-polar rejection at the receiving antenna, for a certain grade of video signal impairment due to the cross-polar channel interference effects, and taken also into account the noise contribution on the signal     

Quantitating Fluorescence Intensity from Fluorophore: The Definition of MESF Assignment

The quantitation of fluorescence radiance may at first suggest the need to obtain the number of fluorophore that are responsible for the measured fluorescence radiance. This goal is beset by many difficulties since the fluorescence radiance depends on three parameters 1) the probability of absorbing a photon (molar extinction), 2) the number of fluorophores, and 3) the probability of radiative decay of the excited state (quantum yield). If we use the same fluorophore in the reference solution and the analyte then, to a good approximation, the molar extinction drops out from the comparison of fluorescence radiance and we are left with the comparison of fluorescence yield which is defined as the product of fluorophore concentration and the molecular quantum yield. The equality of fluorescence yields from two solutions leads to the notion of equivalent number of fluorophores in the two solutions that is the basis for assignment of MESF (Molecules of Equivalent Soluble Fluorophore) values. We discuss how MESF values are assigned to labeled microbeads and by extension to labeled antibodies, and how these assignments can lead to the estimate of the number of bound antibodies in flow cytometer measurements.     

Impact of finite laser linewidth on the performance of OFDMnetworks employing single-cavity Fabry-Perot demultiplexers

In this paper we investigate the impact of finite laser linewidths (i.e. source partial coherence) on the crosstalk performance of optical frequency division multiplexing (OFDM) networks employing single-cavity Fabry-Perot demultiplexers. Results are presented that show the important limitation imposed by the finite laser linewidths on the attainable bit error rate (BER), maximum number of users, and the required power penalties to overcome this impairment     

On the use of tapered linearly chirped gratings asdispersion-induced distortion equalizers in SCM systems

We report on the use of tapered linearly chirped fiber gratings to equalize dispersion-induced distortion in long distance/broad-band subcarrier multiplexed (SCM) systems. Different apodization functions for the coupling factor of the fiber grating have been considered and their equalizing capability of fiber-induced distortion in a subcarrier system have been compared. The results of the theoretical analysis show that both harmonic and intermodulation distortions are significantly reduced when the equalizer parameters have been properly designed. Higher reduction of the nonlinear distortion is obtained when the length of the filter increases, even though a saturation effect on this reduction figure appears when the equalizer length is about four or five times its minimum value to achieve equalization, which is derived theoretically based on the SCM optical system parameters. The performance of a Tanh-type tapered linearly chirped grating equalizer on a realistic broadband SCM system is also considered. The results reveal that the dispersion-induced distortion can be neglected when the equalizer is employed     

Nonlinear distortion generated by DSF-based optical-phase conjugators in analog optical systems

In this paper, the nonlinear distortion induced by dispersion-shifted-fiber-based optical-phase conjugators (OPCs) in intensity-modulated subcarrier multiplexing optical systems is evaluated. In this study, it is shown that the nonlinear distortion mainly arises from the four-wave mixing (FWM) process during the phase conjugation, although there also exists influences from other nonlinear effects. Closed expressions for calculating the second- and third-order harmonic distortions due to FWM, self-phase modulation, cross-phase modulation and group-velocity dispersion effects in the dispersion-shifted-fiber-based OPC are also reported for the first time. The influence of several system design parameters, such as the optical modulation index, the number of channels, the input optical powers, and the effective area of the dispersion-shifted fiber on the compensation of fiber-induced nonlinear distortions employing the optical-phase conjugation technique, is considered.     

Controlled-Release Matrix of Acetaminophen-Ethylcellulose Solid Dispersion

In this study ethylcellulose was evaluated as a carrier for preparation of prolonged release acetaminophen tablets. Solid dispersions containing three levels of ethylcellulose and acetaminophen (1:3; 1:1; 3:1) were prepared by the solvent method. Also physical mixtures at the same level of ethylcellulose and acetaminophen were prepared. Systems composed of solid dispersion or physical mixture containing the equivalent weight of 50 mg acetaminophen, Lactose fast-flo as diluent and 1% magnesium stearate as lubricant were compressed into tablets and tested for dissolution. The dissolution data showed that the drug release decreased as the level of ethylcellulose increased in the solid dispersion formulations. The drug release from tablets prepared with solid dispersion followed the diffusion controlled model for inert porous matrix, while the drug release from tablets prepared with physical mixture followed the first-order kinetic model.     

Kinetic Monte-Carlo simulation of network formation

Summary the simulation described in Part I was applied to random step polyaddition of a trifunctional monomer and the results were compared with exact solution for an infinite system. The gel point conversions, the weight-average degree of polymerization before (P _w) and beyond (P _w,sol) the gel point, the sol fraction and the cycle rank were used for comparison. The best way for detection of the gel point conversion is the extrapolation of the gel fraction, w _g, to w _g=0. The largest fluctuations are exhibited by P _w and P _w,sol. To get results closer to the exact ones, one can repeat several experiments with smaller number of units or increase the number of units, the former way being somewhat more economical. Typical orders of magnitude used were 10⁷ monomeric units.     

Depression in college students: Personality and experiential factors.

In this study we examined the nature of college-student depression and its relation to personality variables and to experiences unique to college life. Thirty-five depressed and 39 nondepressed students completed a depression inventory, a series of personality scales, and a survey developed to investigate the impact of potentially distressing components of college life. Results revealed that college-student depression, though mild in intensity, represents a serious problem: Three quarters of depressed students had been depressed for more than 3 months, and half had contemplated suicide. Both personality characteristics and experiential variables were found to be significantly related to depression, together accounting for approximately half the variance. We examined individual personality traits and experiential variables that were found to differ between depressed and nondepressed subjects, and we discuss the implications of the findings for counseling and for future research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)