The Influence of the Sequence of Application of Modifying Components on the Protective Properties of a Chemical Ammonia Absorber

Protection of Metals and Physical Chemistry of Surfaces - In this work, a universal sorbent has been obtained that works according to the mechanisms of chemisorption and adsorption by impregnating...     

Hydrogen production by steam reforming of ethanol over Co/CeO2 catalysts: Effect of cobalt content

The Co/CeO₂ catalysts obtained by co-precipitation method were used in the steam reforming of ethanol (SRE). The influence of cobalt active phase content (15–29 wt%), the reaction temperature (420–600 °C) and H₂O/EtOH molar ratio (12/1 and 6/1) were examined. The physicochemical characterization revealed that the cobalt content of the catalyst influences the metal-support interaction which results in catalyst performance in SRE process. The differences between catalytic properties of the Co/CeO₂ catalysts with different metal loading in SRE process decayed at 500 °C for H₂O/EtOH = 12/1. The best performance among the tested catalysts showed the 29Co/CeO₂ catalyst with the highest cobalt content, exhibiting the highest ethanol conversion, selectivity to two most desirable products and the lowest selectivity to by-products in comparison with catalysts containing smaller amount of metal. Its catalytic properties results probably from its unique physicochemical properties, i.e this catalyst contains large amount of cobalt but the metal crystallites are relatively small. Regardless cobalt content, an increase in the water-to-ethanol molar ratio in the feed increased the concentration of hydrogen an carbon dioxide and decreased formation of carbon monoxide, acetone, aldehyde and ethylene.     

Refined solution of the timoshenko problem for an orthotropic beam on a rigid base

We have obtained the solution of the problem of a composite (orthotropic) beam partly supported on a perfectly rigid base under a uniformly distributed load. For calculations, we use the refined model of beams that takes into account the strains of transverse shear and compression. We have derived an equation for evaluating the size of the contact area and relations for calculating the contact pressure of the rigid base on the external surface of the beam. Numerical results obtained by the refined model for isotropic and orthotropic materials are compared with those corresponding to the classical theory, the shear model of beams, and the plane problem of the theory of elasticity.     

Influence of Transverse Anisotropy and Type of Boundary Conditions on the Stress State of a Circular Transtropic Plate

Strength of Materials - On the basis of the equations of the nonclassical model of bending of transtructural plates of average thickness, which takes into account the influence of normal stress...     

Steady State Isotopic Transient Kinetic Analysis of Flameless Methane Combustion over Pd/Al2O3 and Pt/Al2O3 Catalysts

The SSITKA measurements were performed in the steady state of complete methane oxidation on the Pd/Al₂O₃ and Pt/Al₂O₃ catalysts. It was found that the number of intermediates and their average life-time on the catalyst surface changes with the increase of reaction temperature. On the Pd/Al₂O₃ catalyst there is larger number of active centres than on Pt/Al₂O₃ catalyst which permits the course of methane oxidation at lower temperatures.