Thermally induced fracture for core-veneered dental ceramic structures

Effective and reliable clinical uses of dental ceramics necessitate an insightful analysis of the fracture behaviour under critical conditions. To better understand failure characteristics of porcelain veneered to zirconia core ceramic structures, thermally induced cracking during the cooling phase of fabrication is studied here by using the extended finite element method (XFEM). In this study, a transient thermal analysis of cooling is conducted first to determine the temperature distributions. The time-dependent temperature field is then imported to the XFEM model for viscoelastic thermomechanical analysis, which predicts thermally induced damage and cracking at different time steps. Temperature-dependent material properties are used in both transient thermal and thermomechanical analyses. Three typical ceramic structures are considered in this paper, namely bi-layered spheres, squat cylinders and dental crowns with thickness ratios of either 1:2 or 1:1. The XFEM fracture patterns exhibit good agreement with clinical observation and the in vitro experimental results obtained from scanning electron microscopy characterization. The study reveals that fast cooling can lead to thermal fracture of these different bi-layered ceramic structures, and cooling rate (in terms of heat transfer coefficient) plays a critical role in crack initiation and propagation. By exploring different cooling rates, the heat transfer coefficient thresholds of fracture are determined for different structures, which are of clear clinical implication.     

Finite element analysis suggests functional bone strain accounts for continuous post-eruptive emergence of teeth

ObjectiveTo explore the possible role of functional stress in driving continuous post-eruptive emergence of teeth.DesignA two dimensional finite element analysis model was established with a single mandibular premolar subjected to sagittal bending. Equivalent strain was charted for the inner and outer surfaces of the lamina dura, because bone deposition and resorption of this structure is confined to surface osteoblasts and osteoclasts. Bone disuse resorption was assumed to take place at equivalent strain values below 0.0008, while deposition was above 0.002. Strain in the periodontal ligament and principal stress throughout the model were also characterized.ResultsStrain analysis indicated bone maintenance for the lamina dura throughout most of the root length, but in both the apical and upper root regions, resorption was predicted for the outer surface, and bone deposition was predicted for the inner surface of the lamina dura. Strain in the periodontal ligament varied little with the exception of a marked increase close to the crown. Principal stress analysis revealed compression of the lower model border, with areas of increasing tension towards the upper model border.ConclusionsStrain from functional forces may continuously drive post-eruptive emergence of teeth through bony remodelling of the lamina dura, lifting teeth by both raising the apical lamina dura, and narrowing the upper root space to accommodate tapering root form. Such strain-driven bone turnover may contribute to pre-eruptive movement of teeth.     

Effects of different numbers of mini-dental implants on alveolar ridge strain distribution under mandibular implant-retained overdentures

Purpose

To investigate the strains around mini-dental implants (MDIs) and retromolar edentulous areas when using different numbers of MDIs in order to retain mandibular overdentures.

Loading of a single implant in simulated bone

This study investigated the effect of occlusal design on the strain developed in simulated bone of implant-supported single crown models. Triaxial strain gauges were attached at the cervical area of each model. Occlusal design, load location, and magnitude were examined to determine the maximum axial principal strains (Μó) of four occlusal designs: 30-degree cusp inclination with 4- and 6-mm occlusal table dimensions and a 10-degree cusp inclination with 4- and 6-mm occlusal table dimensions. Statistical differences were found for peak average maximum principal strains between each occlusal design when the applied load was directed along the central fossa and 2 mm buccal to the central fossa along the inclined plane, with strain gauges attached at the cervicobuccal (P < .001) and cervicolingual (P ? .001) aspects. In all loading conditions, the 30-degree cusp inclination and 6-mm occlusal table dimension consistently presented the largest strains compared with the other occlusal designs. A reduced cusp inclination and occlusal table dimension effectively reduced experimental bone strain on implant-supported single crowns. The occlusal table dimension appeared to have a relatively more important role than cusp inclination.