Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Edge-to-edge interfaces in Ti?Al modeled with the embedded atom method

The atomistic structure and energies of high-index interphase boundaries are explored using a combination of molecular statics and dynamics simulations with embedded atom potentials. We investigate planar boundaries between the α₂ and γ phases in the Ti−Al system. The class of boundaries considered has a high-index boundary orientation; the orientation relationship between the α₂ and γ phases also is high index, and a set of planes from each phase meet edge to edge at the boundary plane. For the particular case of a boundary that is commensurate in one direction and coincides with a moiré plane given by the so-called “Δg” diffraction condition, the boundary is not structurally singular, but it is energetically stable and does not appear to dissociate into other low-energy configurations. Misfit compensating defects are not observed; misfit in directions other than the commensurate one appears to be distributed uniformly. The boundary energy is evaluated as a function of the orientation of the boundary plane, and the edge-to-edge (moiré) boundary is found to lie in an energy cusp. This article is based on a presentation made in the “Hume-Rothery Symposium on Structure and Diffusional Growth Mechanisms of Irrational Interphase Boundaries,” which occurred during the TMS Winter meeting, March 15–17, 2004, in Charlotte, NC, under the auspices of the TMS Alloy Phases Committee and the co-sponsorship of the TMS-ASM Phase Transformations Committee.     

Minimum cost design of a cellular plate loaded by uniaxial compression

Cellular plates are constructed from two base plates and an orthogonal grid of stiffeners welded between them. Halved rolled I-section stiffeners are used for fabrication aspects. The torsional stiffness of cells makes the plate very stiff. In the case of uniaxial compression the buckling constraint is formulated on the basis of the classic critical stress derived from the Huber’s equation for orthotropic plates. The cost function contains the cost of material, assembly and welding and is formulated according to the fabrication sequence. The unknown variables are the base plate thicknesses, height of stiffeners and numbers of stiffeners in both directions. The cellular plate is lighter and cheaper than the plate stiffened on one side. The Particle Swarm Optimization and the IOSO techniques are used to find the optimum. PSO contains crazy bird and dynamic inertia reduction criteria, IOSO is based on a response surface technology.     

Floral volatiles ofTanacetum vulgare L. attractive toLobesia botrana den. et schiff. females

The European grapevine moth (EGVM),Lobesia botrana, is a major pest of grapes in Europe. Females are attracted to a nonhost plant: tansy (Tanacetum vulgare L.), which is a common weed in Slovakian vineyards. A steam distillate extract of tansy flowers was analyzed by means of a GC-EAG technique to screen constituents detected by the olfactory receptors of EGVM females. From more than 200 GC peaks, nine peaks corresponding to monoterpenoids released an EAG response in more than 70% of the females (N=15):p-cymene,d-limonene,-thujene,-thujone,-thujone, thujyl alcohol, terpinene-4-ol, (Z)-verbenol, and piperitone. The steam distillate of tansy as well as a synthetic blend of identified compounds released consistent attraction in a field cage. The use of nonhost plants and host plant odors in integrated pest management is discussed.     

PACAP-38 in Acute ST-Segment Elevation Myocardial Infarction in Humans and Pigs: A Translational Study

Acute myocardial infarction (MI) is one of the most common causes of death worldwide. Pituitary adenylate cyclase activating polypeptide (PACAP) is a cardioprotective neuropeptide expressing its receptors in the cardiovascular system. The aim of our study was to examine tissue PACAP-38 in a translational porcine MI model and plasma PACAP-38 levels in patients with ST-segment elevation myocardial infarction (STEMI). Significantly lower PACAP-38 levels were detected in the non-ischemic region of the left ventricle (LV) in MI heart compared to the ischemic region of MI-LV and also to the Sham-operated LV in porcine MI model. In STEMI patients, plasma PACAP-38 level was significantly higher before percutaneous coronary intervention (PCI) compared to controls, and decreased after PCI. Significant negative correlation was found between plasma PACAP-38 and troponin levels. Furthermore, a significant effect was revealed between plasma PACAP-38, hypertension and HbA1c levels. This was the first study showing significant changes in cardiac tissue PACAP levels in a porcine MI model and plasma PACAP levels in STEMI patients. These results suggest that PACAP, due to its cardioprotective effects, may play a regulatory role in MI and could be a potential biomarker or drug target in MI.     

Modeling of Intercritical Heat Treatment of DP and TRIP Steels

The final microstructure of DP and TRIP assisted steels can evolve after hot working (hot rolling) or during post heat treatment process. In the formation of the final structure a number of different technological parameters have important roles, e.g. end temperature of rolling, cooling rates, temperature of intercritical annealing, etc. As a result of the individual factors and their combinations a lot of product technology routes are feasible. The effect of the different combinations of these technological parameters on the microstructure can be mapped by the special Jominy end-quench test (so called intercritical Jominy end-quench test) described in this paper. Unlike the traditional Jominy test, in this case there is a partial anstenizing between A1 and A3 temperatures which results in a given amount of ferrite in the microstructure before quenching. The method developed can be applied for mapping DP and TRIP assisted steels' microstructure in a wide range of technological parameters. The analysis of measured and calculated data can help us find the technological parameters optimal from the microstructural point of view.     

Lipid labeling with32P-orthophosphate and14C-acetate in marine copepods

Freshly collectedCalanus pacificus were maintained in sea water containing 25 μCi/ml [³²P]orthophosphate or 1 μCi/ml [¹⁴C]acetate at 10 C for 24 hr. The animals took up label from the environment and incorporated it into various lipid fractions. After incubation with [¹⁴C]acetate the order of specific activity of the different lipid classes was: phospholipids > free fatty acids > wax esters > triglycerides. Argentation thin layer chromatography of the fatty acid methyl esters showed that ca. 50% of the activity was in saturated fatty acids and 34% in polyunsaturated acids. When the animals were exposed to [³²P]orthophosphate, lysophosphatidyl choline became most heavily labeled, followed by lysophosphatidyl ethanolamine, sphingomyelin, phosphatidyl ethanolamine, and phosphatidyl choline. Comparison of the data obtained with those available for decapods and mammals revealed striking similarities between these phylogenetically distant groups. It is believed that labeling the lipids of marine and freshwater planktonic crustaceans in this way will provide much information about the metabolism of lipids in these organisms.