Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

Ammonia production using iron nitride and water as hydrogen source under mild temperature and pressure

Ammonia generation was studied in the reaction between water and nitrogen-containing iron at 323 K and atmospheric pressure. Similar to metallic Fe, the interstitial compound Fe₃N reduced water through Fe oxidation to produce hydrogen gas, while the N combined with atomic hydrogen to produce ammonia as a byproduct. The addition of carbon dioxide to this system accelerated the reaction with concomitant consumption of carbon dioxide. The promoted ammonia production upon addition of carbon dioxide can be attributed to the generation of atomic hydrogen from the redox reaction of carbonic acid and Fe, as well as removal of used Fe from the reaction system through the formation of a soluble carbonato complex. When carbonate was added to the reaction system, the production rates of ammonia and hydrogen increased further. The results here confirmed that ammonia can be synthesized from iron nitride under mild conditions by utilizing carbon dioxide.     

Molecular Targeted Therapy for the Bone Loss Secondary to Pyogenic Spondylodiscitis Using Medications for Osteoporosis: A Literature Review

Pyogenic spondylodiscitis can cause severe osteolytic and destructive lesions in the spine. Elderly or immunocompromised individuals are particularly susceptible to infectious diseases; specifically, infections in the spine can impair the ability of the spine to support the trunk, causing patients to be bedridden, which can also severely affect the physical condition of patients. Although treatments for osteoporosis have been well studied, treatments for bone loss secondary to infection remain to be elucidated because they have pathological manifestations that are similar to but distinct from those of osteoporosis. Recently, we encountered a patient with severely osteolytic pyogenic spondylodiscitis who was treated with romosozumab and exhibited enhanced bone formation. Romosozumab stimulated canonical Wnt/β-catenin signaling, causing robust bone formation and the inhibition of bone resorption, which exceeded the bone loss secondary to infection. Bone loss due to infections involves the suppression of osteoblastogenesis by osteoblast apoptosis, which is induced by the nuclear factor-κB and mitogen-activated protein kinase pathways, and osteoclastogenesis with the receptor activator of the nuclear factor-κB ligand-receptor combination and subsequent activation of the nuclear factor of activated T cells cytoplasmic 1 and c-Fos. In this study, we review and discuss the molecular mechanisms of bone loss secondary to infection and analyze the efficacy of the medications for osteoporosis, focusing on romosozumab, teriparatide, denosumab, and bisphosphonates, in treating this pathological condition.     

Mechanisms of orientational and photoelastic birefringence generation of methacrylates for the design of zero–zero‐birefringence polymers

The intrinsic birefringence Δn⁰ and photoelastic coefficient C of poly(methyl methacrylate), poly(2,2,2‐trifluroethyl methacrylate), poly(phenyl methacrylate), and poly(2,2,3,3,3‐pentafluorophenyl methacrylate) were determined. We categorized these methacrylate polymers into four birefringence‐types, even though their molecular structures differed only by the substituents on the side chains. Based on the results of Δn⁰ and C, novel polymers that exhibit neither orientational nor photoelastic birefringence, i.e., zero–zero‐birefringence polymers, were designed and synthesized by quaternary copolymerization system. Furthermore, we confirmed that the mechanisms of orientational birefringence and photoelastic birefringence generation were different in these methacrylate polymers. The conformation of the repeat unit of the polymers was nearly constant during the generation of orientational birefringence. In contrast, the conformation of the repeat unit of the polymers changed during the generation of photoelastic birefringence in the glassy state. These findings demonstrated the reasonability of evaluating orientational and photoelastic birefringence separately, as well as the adequacy of the classification of polymers into four birefringence‐types. Given these results and the fact that zero–zero‐birefringence polymers could be prepared successfully by four‐birefringence type monomers, we demonstrated the reasonability of the method for designing the zero–zero‐birefringence polymers. POLYM. ENG. SCI., 55:1330–1338, 2015. © 2015 Society of Plastics Engineers     

Synthetic Peroxides Promote Apoptosis of Cancer Cells by Inhibiting P-Glycoprotein ABCB5

This article discloses a new horizon for the application of peroxides in medical chemistry. Stable cyclic peroxides are demonstrated to have cytotoxic activity against cancer cells; in addition a mechanism of cytotoxic action is proposed. Synthetic bridged 1,2,4,5-tetraoxanes and ozonides were effective against HepG2 cancer cells and some ozonides selectively targeted liver cancer cells (the selectivity indexes for compounds 11 b and 12 a are 8 and 5, respectively). In some cases, tetraoxanes and ozonides were more selective than paclitaxel, artemisinin, and artesunic acid. Annexin V flow-cytometry analysis revealed that the active ozonides 22 a and 23 a induced cell death of HepG2 by apoptosis. Further study showed that compounds 22 a and 23 a exhibited a strong inhibitory effect on P-glycoprotein (P-gp/ABCB5)-overexpressing HepG2 cancer cells. ABCB5 is a key player in the multidrug-resistant phenotype of liver cancer. Peroxides failed to demonstrate a direct correlation between oxidative potential and their biological activity. To our knowledge this is the first time that peroxide diastereoisomers have been found to show stereospecific antimalarial action against the chloroquine-sensitive 3D7 strain of Plasmodium falciparum. Stereoisomeric ozonide 12 b is 11 times more active than stereoisomeric ozonide 12 a (IC₅₀=5.81 vs 65.18 μm ). Current findings mean that ozonides merit further investigation as potential therapeutic agents for drug-resistant hepatocellular carcinoma.     

Changes in the gaseous H2S barrier properties of damaged silicate coated nylon 6 films

The damage imposed on SiO _x deposited nylon 6 films as a result of abrasion with a cotton cloth and Gelboflex testing was examined by evaluating the rate at which copper plates, which were enveloped by the damaged films, were corroded by H₂S. Abrasion with a cotton cloth caused some micro-cracking of the SiO _x layer and the permeation rate of H₂S approached that of the uncoated nylon 6 film. Damage to the SiO _x layer by twisting and crushing progressed gradually with the number of Gelboflex test cycles and correspondingly the corrosion rate of the copper plates increased. Comparison of the corrosion rates of the copper plates kept in the pouches made of various commercial films with those obtained for the damaged SiO _x deposited nylon 6 films showed a clear relationship between the H₂ permeation rate of the films and the corrosion rate of the copper plates by H₂S.     

Specific changes in human brain following reperfusion after cardiac arrest

BACKGROUND AND PURPOSE: Very few reports are available on serial changes in human brain after cardiac arrest. The primary objective of this study is to investigate sequential neuroradiological changes in patients remaining in a persistent vegetative state following resuscitation after cardiac arrest. METHODS: We repeatedly studied eight vegetative patients resuscitated from unexpected out-of-hospital cardiac arrest using computed tomographic (CT) scanning and high-field magnetic resonance (MR) imaging at 1.5 T. RESULTS: In seven of the eight patients, CT scans obtained between days 2 and 6 features symmetrical low-density lesions in the bilateral caudate, lenticular, and/or thalamic nuclei. These ischemic lesions were persistently of low density on serial CT scans. In these seven patients, MR images demonstrated what were thought to be hemoglobin degradation products derived from minor hemorrhages localized in the bilateral basal ganglia, thalami, and/or substantia nigra. Diffuse brain edema in the acute stage and diffuse brain atrophy in the chronic stage were consistent neuroradiological findings. No abnormal enhanced lesions were demonstrated by CT scans. CONCLUSIONS: The most characteristic findings on high-field MR images were symmetrical lesions in the bilateral basal ganglia, thalami, and/or substantia nigra with specific changes suggestive of minor hemorrhages that were not evident on CT scans. We speculate that these minor hemorrhages result from diapedesis of red blood cells in these regions during the reperfusion period through the endothelium disrupted by ischemia-reperfusion insult.     

Moisture migration in idealized bilayer systems: relationships among water-associated properties, structure, and texture

The effects of composition and thermal treatment on the water sorption and diffusional properties of idealized protein gels arranged in bilayer configurations were determined; these water binding/migration properties were related to the mechanical characteristics of the gels. Samples were prepared from whey protein concentrate (WPC), they consisted of water:WPC ratios of 1.5 to 5.67, and were thermally set for 20–60 min. Moisture migration rates from samples interfaced with filters were determined, as were moisture sorption capacities of samples immersed in water. The physical properties of the gels were assessed by uniaxial compression and microscopy. Results showed that gel strength and consequent extent of protein interaction—as affected by thermal treatment—controlled the ability of the gel structure to absorb water. Sorption was exponentially correlated with gel modulus and linearly correlated with a function of protein content, heating time, and immersion time. Rates of diffusion from interfaced gels were dependent solely on water content. It was concluded that the degree of protein interaction, whether influenced by concentration or thermal treatment, affected network extensibility and thus the capacity of the gels to act as receptors of moisture. Results have implications for the functionality of shelf-stable sandwiches and other multicomponent foods.     

The role of aluminum in automotive weight reduction—part III

This series of articles provides, from an international perspective, an analysis of the future of the automotive industry and aluminum’s role in automobile weight reduction. Part I briefly described technological, environmental, and societal issues that are mandating vehicular weight reduction for, among other reasons, purposes of fuel economy. Part II described the status of the weight-reduction technologies that are currently available and projects how they may evolve in the coming years. Part III, the final installment, examines some of the specific strengths and weaknesses of aluminum alloys with regard to their long-term attractiveness to automakers.