The Potential Role of Small-Molecule PERK Inhibitor LDN-0060609 in Primary Open-Angle Glaucoma Treatment

Primary open-angle glaucoma (POAG) constitutes the most common type of glaucoma. Emerging evidence suggests that Endoplasmic Reticulum (ER) stress and the protein kinase RNA-like endoplasmic reticulum kinase (PERK)-mediated Unfolded Protein Response (UPR) signaling pathway play a key role in POAG pathogenesis. Thus, the main aim of the study was to evaluate the effectiveness of the PERK inhibitor LDN-0060609 in cellular model of glaucoma using primary human trabecular meshwork (HTM) cells. To evaluate the level of the ER stress marker proteins, Western blotting and TaqMan gene expression assay were used. The cytotoxicity was measured by XTT, LDH assays and Giemsa staining, whereas genotoxicity via comet assay. Changes in cell morphology were assessed by phase-contrast microscopy. Analysis of apoptosis was performed by caspase-3 assay and flow cytometry (FC), whereas cell cycle progression by FC. The results obtained have demonstrated that LDN-0060609 triggered a significant decrease of ER stress marker proteins within HTM cells with induced ER stress conditions. Moreover, LDN-0060609 effectively increased viability, reduced DNA damage, increased proliferation, restored normal morphology, reduced apoptosis and restored normal cell cycle distribution of HTM cells with induced ER stress conditions. Thereby, PERK inhibitors, such as LDN-0060609, may provide an innovative, ground-breaking treatment strategy against POAG.     

Assessment of cytotoxicity and immune compatibility of phytochemicals‐mediated biosynthesised silver nanoparticles using Cynara scolymus

The study was focused on the phytochemicals‐mediated biosynthesis of silver nanoparticles using leaf extracts and infusions from Cynara scolymus. To identify the antioxidant activity and total phenolic content, the 1,1‐diphenyl‐1‐picrylhydrazyl and Folin–Ciocalteau methods were applied, respectively. The formation and stability of the reduced silver ions were monitored by UV–vis spectrophotometer. The particle sizes of the silver nanoparticles were characterised using the dynamic light scattering technique and scanning electron microscope. The phase composition of the obtained silver nanoparticles was characterised by X‐ray diffraction. The silver nanoparticles suspension, artichoke infusion, and silver ions were separately tested towards potential cytotoxicity and pro‐inflammatory effect using mouse fibroblasts and human monocytes cell line, respectively. The total phenolic content and antioxidant activity of ethanol extract and infusion were found significantly higher as compared to aqueous extract and infusion. The UV–visible spectrophotometric analysis revealed the presence of the characteristic absorption band of the Ag nanoparticles. Moreover, it was found that with the increasing volume of plant extract, the average size of particles was increased. Biocompatibility results evidently showed that silver nanoparticles do not induce monocyte activation, however in order to avoid their cytotoxicity suspension at a concentration <2 ppm should be applied.Inspec keywords: pharmaceuticals, health and safety, renewable materials, toxicology, organic compounds, antibacterial activity, X‐ray diffraction, nanomedicine, nanoparticles, nanofabrication, suspensions, ultraviolet spectra, visible spectra, scanning electron microscopy, silver, particle sizeOther keywords: phytochemicals‐mediated biosynthesis, antioxidant activity, total phenolic content, dynamic light scattering technique, silver nanoparticles suspension, scanning electron microscopy, Cynara scolymus, 1,1 diphenyl‐1‐picrylhydrazyl method, cytotoxicity, immune compatibility, leaf extracts, UV‐vis spectrophotometry, particle size, Folin‐Ciocalteau methods, phase composition, X‐ray diffraction, artichoke infusion, pro‐inflammatory effect, mouse fibroblasts, human monocytes cell line, Ag     

The Role of TRPM2 in Endothelial Function and Dysfunction

The transient receptor potential (TRP) melastatin-like subfamily member 2 (TRPM2) is a non-selective calcium-permeable cation channel. It is expressed by many mammalian tissues, including bone marrow, spleen, lungs, heart, liver, neutrophils, and endothelial cells. The best-known mechanism of TRPM2 activation is related to the binding of ADP-ribose to the nudix-box sequence motif (NUDT9-H) in the C-terminal domain of the channel. In cells, the production of ADP-ribose is a result of increased oxidative stress. In the context of endothelial function, TRPM2-dependent calcium influx seems to be particularly interesting as it participates in the regulation of barrier function, cell death, cell migration, and angiogenesis. Any impairments of these functions may result in endothelial dysfunction observed in such conditions as atherosclerosis or hypertension. Thus, TRPM2 seems to be an attractive therapeutic target for the conditions connected with the increased production of reactive oxygen species. However, before the application of TRPM2 inhibitors will be possible, some issues need to be resolved. The main issues are the lack of specificity, poor membrane permeabilization, and low stability in in vivo conditions. The article aims to summarize the latest findings on a role of TRPM2 in endothelial cells. We also show some future perspectives for the application of TRPM2 inhibitors in cardiovascular system diseases.     

Droplet breakage and coalescence in liquid–liquid dispersions: Comparison of different kernels with EQMOM and QMOM

Droplet coalescence and breakage in turbulent liquid–liquid dispersions is simulated by using computational fluid dynamics (CFD) and population balance modeling. The multifractal (MF) formalism that takes into account internal intermittency was here used for the first time to describe breakage and coalescence in a surfactant‐free dispersion. The log‐normal Extended Quadrature Method of Moments (EQMOM) was for the first time coupled with a CFD multiphase solver. To assess the accuracy of the model, predictions are compared with experiments and other models (i.e., Coulalogou and Tavlarides kernels and Quadrature Method of Moments [QMOM]). EQMOM and QMOM resulted in similar predictions, but EQMOM provides a continuous reconstruction of the droplet‐size distribution. Transient predictions obtained with the MF kernels result in a better agreement with the experiments. © 2016 American Institute of Chemical Engineers AIChE J, 63: 2293–2311, 2017     

Novel Dual PI3K/mTOR Inhibitor,Apitolisib (GDC-0980), Inhibits Growth and Induces Apoptosis in Human Glioblastoma Cells

Deregulated PI3K/AKT/mTOR signalling commonly exists in glioblastoma, making this axis an attractive target for therapeutic manipulation. Given that activation of PI3K/AKT/mTOR promotes tumour growth, metastasis, and resistance to anticancer therapies, mTOR inhibitors show promise in the treatment of cancer. The aim of this study was to investigate the underlying mechanism of novel dual PI3K/mTOR inhibitor, Apitolisib (GDC-0980), in A-172 and U-118-MG GBM tumour cell line suppression. It has been demonstrated that GDC-0980 induces time- and dose-dependent cytotoxicity and apoptosis in investigated glioma cell lines. In our study, the strongest induction of apoptosis was exhibited in the A-172 line after 48 h of incubation with 20 µM GDC-0980, where we observed 46.47% of apoptotic cells. In conclusion, we first discovered that dual PI3K/mTOR blockade by GDC-0980 markedly suppressed survival of human GBM cells and induced apoptosis, independent of the ER stress-mediated DR5 activation. We suggest that GDC-0980, by exerting an inhibitory effect on PERK expression, may thus block its inhibitory effect on protein synthesis, leading to intensification of translation, and this may result in an increase in apoptosis. On the other hand, CHOP stimulates protein synthesis and increases apoptosis. These findings suggest that GDC-0980 may be a candidate for further evaluation as a chemotherapeutic agent for anti-GBM therapy.     

Influence of Gluten and Gum Additives and Cryogenic Treatment on Some Properties and Morphology of Wheat Starch Complex Gels

The influence of gums (guar and xanthan) and gluten additives on the physicochemical properties and structural features of wheat starch gels (8%, w/w) subjected to cryogenic treatment at various temperatures (−9°C, −20°C, −40°C) was studied. Shear modulus and breaking stress of the gels were measured, the gels' morphology was studied with optical microscopy and the local mobility of water in the gels was determined with ESR. The total concentration of polysaccharide additives did not exceed 1% (w/w), and a 65:35 (w/w) mixture of guar and xanthan gums proved to be the optimal additive, which caused a noticeable increase in rigidity and strength of the resulting complex gels. Shear modulus and breaking stress of the gels decreased with lowering the temperature of the cryogenic treatment. The heterogeneous morphology of thin sections of the gel samples was revealed via optical microscopy. ESR studies showed that the local mobility of water was much lower in the gels than in pure water.     

Effect of immobilization of titanocene catalyst in aralkyl imidazolium chloroaluminate media on performance of biphasic ethylene polymerization and polyethylene properties

1-(2-Phenylethyl)-3-methylimidazolium and 1-benzyl-3-methylimidazolium chloroaluminates, [Ph-C₂mim][AlCl₄] and [Bzlmim][AlCl₄], were applied as media of the Cp₂TiCl₂ catalyst for biphasic ethylene polymerization. The studied aralkyl ionic liquids ensure greater stability of the catalyst at higher temperatures and more regular morphology of the produced polyethylene than analogous 1-n-alkyl-3-methylimidazolium chloroaluminates. The alkylaluminium compound participates in the termination reaction of the polymer chain. The catalyst is stable and enables recycling of the ionic liquid phase in the consecutive polymerization reactions. The [Ph-C₂mim][AlCl₄] ionic liquid and AlEt₂Cl alkylaluminium compound turned out to be the most suitable for the biphasic process. The influence of the kind of ionic liquid, alkylaluminium compound (AlEt₂Cl and AlEtCl₂), activator/catalyst molar ratio, reaction temperature, reaction time and catalyst recycling on the polymerization performance as well as polyethylene properties such as molecular weight (M _w ), polydispersity, melting temperature, crystallinity degree, bulk density and particle size is presented.     

Thermal resistance of fabrics vs. thermal insulation of clothing made of the fabrics

The protection of a human body against the negative environmental factors, especially the cold, is one of the crucial functions of clothing. Clothing creates a thermal barrier between the human body and the surroundings. The protective efficiency of clothing goods depends mostly on thermal insulation properties of textile materials applied in clothing. The clothing design, fitting to a user’s body, and a number of layers also play an important role in the phenomenon of the heat exchange between the human organism and its surroundings. The thermal insulation properties of textile materials can be measured by means of different testing devices, such as the “skin model,” the Alambeta, the Permetest, and the Thermo Labo. A measurement of clothing goods from the point of view of their thermal insulation is performed using a thermal manikin. The article presents an investigation of thermal insulation properties of vests by means of thermal manikin. The investigated vests have been made of different textile materials: woven and knitted. The thermal insulation properties of fabrics applied in vests have been measured by means of the Alambeta. The article presents and discusses the relationships between the thermal insulation of vests according to the thermal manikin and the thermal resistance of fabrics applied in the vests.     

Vaporization Studies of the La2O3–Ga2O3 System

The vaporization of the samples of the compositions Ga₂O₃+ LaGaO₃, LaGaO₃+ La₄Ga₂O₉, and La₄Ga₂O₉+ La₂O₃ was investigated using Knudsen effusion mass spectrometry in the temperature range 1494–1937 K. The partial pressures of the gaseous species O₂, Ga, GaO, Ga₂O, and LaO were determined over the samples investigated. The equilibrium partial pressures were used for the calculation of the thermodynamic activities of the components at 1700 K. Gibbs energies of formation of LaGaO₃( s ) and La₄Ga₂O₉( s ) at 1700 K from the component oxides were derived from the thermodynamic activities as −46.4 ± 4.7 and −99.2 ± 7.9 kJ·mol⁻¹, respectively. The results were compared with the literature data obtained using other methods.