Operation of HTS Toggle-Flip-Flop Circuit With Improved Layout Design

Toggle-flip-flop (T-FF) is one of the most important high-T_c superconducting single-flux quantum (HTS SFQ) circuit components and has been designed and fabricated by using YBa₂Cu₃ O_7-delta ramp-edge junction technology. The circuit layout of the T-FF was improved to suppress the junction critical current (I_c) spread in the circuit. Test circuits, which include a T-FF with a single output for evaluating the logic operation and measuring the operating frequency, were fabricated and their operation characteristics were investigated. The T-FF circuit with a single output was successfully operated and finite direct current (dc) supply current margins were obtained at temperatures from 27 to 34 K. Moreover, the maximum operating frequency of the T-FF was estimated to be 360 GHz at 4.2 K and 114 GHz at 41 K. In addition, reduction of dc supply current margins due to thermal noise was also investigated. According to the numerical simulation in which parasitic inductances were taken into account, the narrowest margin in the T-FF circuit wider than plusmn10% was maintained with a bit-error rate (BER) of 10^-6 up to 40 K     

Propagation model for simulating shadowing and multipath fading inland-mobile satellite channel

A land-mobile satellite propagation model which includes multipath fading and shadowing effects using five-state Markov transitions between fade states and nonfade states is proposed. This generates a time-series of the fading, very closely matching statistical characteristics such as fade duration, nonfade duration and fade depth obtained from measured data     

On the possible patterns of inputs for block sorting in the Burrows-Wheeler transformation

Block sorting in the Burrows-Wheeler transformation is to sort all of the n circular shifts of a string of length n lexicographically. We introduce a notion called the width of a sequence of n strings of length n and show that the values of widths are very different between the two types of sequences of strings; (1) a sequence of n randomly generated strings of length n, and (2) the sequence of n circular shifts of a randomly generated string of length n.     

Electrochemical routes for environmentally friendly recycling of rare-earth-based (Sm–Co) permanent magnets

Journal of Applied Electrochemistry - The consumption of critical raw materials, especially those in permanent magnets of Nd–Fe–B and Sm–Co-type, has significantly grown in the...     

Sliding mode closed-loop control of FES: controlling the shank movement

Functional electrical stimulation (FES) enables restoration of movement in individuals with spinal cord injury. FES-based devices use electric current pulses to stimulate and excite the intact peripheral nerves. They produce muscle contractions, generate joint torques, and thus, joint movements. Since the underlying neuromuscular-skeletal system is highly nonlinear and time-varying, feedback control is necessary for accurate control of the generated movement. However, classical feedback/closed-loop control algorithms have so far failed to provide satisfactory performance and were not able to guarantee stability of the closed-loop system. Because of this, only open-loop controlled FES devices are in clinical use in spite of their limitations. The purpose of the reported research was to design a novel closed-loop FES controller that achieves good tracking performance and guarantees closed-loop stability. Such a controller was designed based on a mathematical neuromuscular-skeletal model and is founded on a sliding mode control theory. The controller was used to control shank movement and was tested in computer simulations as well as in actual experiments on healthy and spinal cord injured subjects. It demonstrated good robustness, stability, and tracking performance properties.     

Diterpene structure elucidation from 13cnmr spectra with inductive logic programming

We present a novel application ofInductive Logic Programming (ILP) to the problem of diterpene structure elucidation from 13 CNMR spectra. Diterpenes are organic compounds oflow molecular weight with a skeleton of 20 carbon atoms. They are of significant chemical and commercial interest because oftheir use as lead compounds in the search for new pharmaceutical effectors. The interpretation of diterpene 13 CNMR spectra normally requires specialists with detailed spectroscopic knowledge and substantial experience in natural products chemistry, specifically knowledge on peak patterns and chemical structures. Given a database ofpeak patterns for diterpenes with known structure, we apply several ILP approaches to discover correlations between peak patterns and chemical structure. The approaches used include first - order inductive learning, relational instance based learning, induction oflogical decision trees, and inductive constraint logic. Performance close to that of domain experts is achieved, which suffices for practical use.     

Motivational enhancement therapy for adolescent marijuana users: A preliminary randomized controlled trial.

This study's aims were (a) to investigate the feasibility of a school-based motivational enhancement therapy (MET) intervention in voluntarily attracting adolescents who smoke marijuana regularly but who are not seeking formal treatment and (b) to evaluate the efficacy of the intervention in reducing marijuana use. Ninety-seven adolescents who had used marijuana at least 9 times in the past month were randomly assigned to either an immediate 2-session MET intervention or to a 3-month delay condition. Two thirds of the sample characterized themselves as in the precontemplation or contemplation stages of change regarding marijuana use. Participants' marijuana use and associated negative consequences were assessed at baseline and at a 3-month follow-up. Analyses revealed that both groups significantly reduced marijuana use at the 3-month follow-up ( p = .001); however, no between-group differences were observed. Despite the absence of a clear effect of MET, this study demonstrated that adolescents could be attracted to participate in a voluntary marijuana intervention that holds promise for reducing problematic levels of marijuana use. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

如何设计安全、有效的信号继电器

高档的通信设备曾一度只能在办公环境中才能使用,然而现在这种情况已经改变,家庭中已经普遍具备了互连能力,许多家用电子设备现在通过Ipv6和其他技术已经具备了上网能力。随着宽带通信应用的增加,调制解调器、各种DSL接入复用器以及其他类似设备的安装已经遍及办公室和家庭,消费者可以方便获得价廉的通信设备。对于设备制造商来说,这些装置必须满足安全标准,如IEC60950(InternationalElectrotechnicalCommission第三版),它要求在与数据通信线连接的设备上实现电话网络高压电路的隔离。一般情况下,人们采用传统的电磁通信继电器来开关内…     

Differential inhibition of epidermal growth factor signaling pathways in rat hepatocytes by long-term ethanol treatment

BACKGROUND & AIMS: Long-term ethanol intake suppresses liver regeneration in vivo and ethanol interferes with epidermal growth factor (EGF)-induced DNA synthesis in vitro. Therefore, the effects of long-term ethanol treatment on EGF-activated signaling reactions in rat hepatocytes were investigated. METHODS: Hepatocytes from long-term ethanol-fed rats and pair-fed controls were stimulated with EGF (0.5-20 nmol/L) for 15-120 seconds. Tyrosine phosphorylation of EGF receptor (EGFR), Shc, and phospholipase-C gamma1 (PLC gamma), and growth factor receptor binding protein 2 (Grb2) coprecipitation with EGFR and Shc were analyzed by Western blotting. RESULTS: EGFR autophosphorylation was suppressed at all EGF concentrations in ethanol-fed cells compared with pair-fed cells, without significant differences in total EGFR protein or EGFR tyrosine kinase activity detected in cell lysates, suggesting that intracellular factors suppressed EGFR function. EGF-induced PLC gamma tyrosine phosphorylation and inositol 1,4,5-trisphosphate (InsP3) formation were suppressed, but cytosolic [Ca2+]c elevation was little affected, indicating enhanced InsP3-mediated intracellular Ca2+ release in ethanol-fed cells. Grb2 binding to EGFR was suppressed, but EGF-induced Shc tyrosine phosphorylation and Grb2 association with Shc were not significantly decreased. CONCLUSIONS: Long-term ethanol feeding suppressed EGF-induced receptor autophosphorylation in rat hepatocytes with differential inhibition of downstream signaling processes mediated by PLC gamma, Shc, and Grb2. Altered patterns of downstream signals emanating from EGFR may contribute to deficient liver regeneration in chronic alcoholism.     

Effects of sample orientation on nonpiloted ignition of thin poly(methyl methacrylate) sheets by a laser: 2. Experimental results

The effect of the sample orientation angle on frontside (irradiated surface) ignition and subsequent backside (nonirradiated surface) flame appearance over thin poly(methyl methacrylate) (PMMA) sheets having thicknesses of 0.2 and 0.5 mm has been experimentally investigated, using a CO₂ laser as an external radiant source in quiescent normal gravity. The sample orientation angle was varied from θ=−90° (ceiling configuration) to +90° (floor configuration) at intervals of 15° under three different laser powers of 16.0, 17.3, and 26.1 W. The shortest frontside ignition delay time was observed for the ceiling configuration (θ=−90°) and frontside ignition delay time significantly varied with increase in sample orientation angle at a laser power of 16.0 W. As the laser power was increased, frontside ignition was observed at all angles and its delay time became less dependent on the sample orientation angle. The appearance of a backside flame was achieved after the formation of an open hole (due to local consumption of the sample) by two different processes: the onset of laser induced ignition over the backside sample (backside ignition) and a flame traveling from the frontside through an open hole to the backside (backside flame). The former process was observed for a limited number of cases only around the vertical configurations (−30°?θ?30°). The delay time for the appearance of backside flame tended to be longer for sample surfaces facing downward (θ°<0) than for the sample surface facing upward (θ?0°) regardless of the laser power. When the duration of laser irradiation was shortened from 10 to 4 s, as soon as the laser was shut off, the flame on the frontside immediately shrank, moved close to the sample surface, and then traveled rapidly to the backside. Therefore, the delay time of backside flame appearance (about 6 s) became longer with longer duration of laser irradiation after the onset of a frontside flame. The size of the hole (about 4 mm diameter) was large enough for the flame to travel through it, even after 4 s of laser irradiation to sample. These results indicate that the size of the hole appears to be not a critical parameter for the appearance of the backside flame.