Energy Metabolites as Biomarkers in Ischemic and Dilated Cardiomyopathy

With more than 25 million people affected, heart failure (HF) is a global threat. As energy production pathways are known to play a pivotal role in HF, we sought here to identify key metabolic changes in ischemic- and non-ischemic HF by using a multi-OMICS approach. Serum metabolites and mRNAseq and epigenetic DNA methylation profiles were analyzed from blood and left ventricular heart biopsy specimens of the same individuals. In total we collected serum from n = 82 patients with Dilated Cardiomyopathy (DCM) and n = 51 controls in the screening stage. We identified several metabolites involved in glycolysis and citric acid cycle to be elevated up to 5.7-fold in DCM (p = 1.7 × 10⁻⁶). Interestingly, cardiac mRNA and epigenetic changes of genes encoding rate-limiting enzymes of these pathways could also be found and validated in our second stage of metabolite assessment in n = 52 DCM, n = 39 ischemic HF and n = 57 controls. In conclusion, we identified a new set of metabolomic biomarkers for HF. We were able to identify underlying biological cascades that potentially represent suitable intervention targets.     

Castor oil dehydration kinetics

The dehydration reaction kinetics of castor oil was investigated with sodium bisulfate-sodium bisulfite mixture (SB-SB) or p-toluenesulfonic acid as catalyst. Reactions were carried out at 210, 220, and 230°C, and a kinetic model was determined for each case. The reactions with SB-SB catalyst at 210 and 220°C and with p-toluenesulfonic acid at 210°C followed second-order kinetics. A first-order rate equation showed the best fit to the experimental data for the reaction with SB-SB at 230°C. p-Toluenesulfonic acid-catalyzed reactions at 220 and 230°C were also first-order reactions. Additionally, some mathematical equations were derived between iodine value, refractive index, viscosity, and reaction time.     

Investigation of the effects of fatty acids on the compressive strength of the concrete and the grindability of the cement

In cement industry, a great energy consumption has been observed during grinding of clinker. To reduce this consumption, some waste products have been used as grinding aids.In this investigation, the effects of sunflower oil (SO), oleic acid (OA), stearic acid (SA), myristic acid (MA) and lauric acid (LA) on the fineness and strength of the cement have been examined. These aids were added into clinker in certain ratios based on the cement clinker weight and the grinding has been done for a definite time at the same condition.All of the fatty acids used increased the fineness as compared with the cement without the grinding additives. SO and OA decreased the strength significantly, LA decreased it to a lesser extent and SA increased it definitely according to the common cement. But MA did not alter the strength of the cement as much as SA. In addition, the covering of the balls influences the grinding of cement clinker unfavourably.     

Prediction of flank wear by using back propagation neural network modeling when cutting hardened H-13 steel with chamfered and honed CBN tools

Productivity and quality in the finish turning of hardened steels can be improved by utilizing predicted performance of the cutting tools. This paper combines predictive machining approach with neural network modeling of tool flank wear in order to estimate performance of chamfered and honed Cubic Boron Nitride (CBN) tools for a variety of cutting conditions. Experimental work has been performed in orthogonal cutting of hardened H-13 type tool steel using CBN tools. At the selected cutting conditions the forces have been measured using a piezoelectric dynamometer and data acquisition system. Simultaneously flank wear at the cutting edge has been monitored by using a tool makers microscope. The experimental force and wear data were utilized to train the developed simulation environment based on back propagation neural network modeling. A trained neural network system was used in predicting flank wear for various different cutting conditions. The developed prediction system was found to be capable of accurate tool wear classification for the range it had been trained.     

The influence of friction models on finite element simulations of machining

In the analysis of orthogonal cutting process using finite element (FE) simulations, predictions are greatly influenced by two major factors; a) flow stress characteristics of work material at cutting regimes and b) friction characteristics mainly at the tool-chip interface. The uncertainty of work material flow stress upon FE simulations may be low when there is a constitutive model for work material that is obtained empirically from high-strain rate and temperature deformation tests. However, the difficulty arises when one needs to implement accurate friction models for cutting simulations using a particular FE formulation. In this study, an updated Lagrangian finite element formulation is used to simulate continuous chip formation process in orthogonal cutting of low carbon free-cutting steel. Experimentally measured stress distributions on the tool rake face are utilized in developing several different friction models. The effects of tool-chip interfacial friction models on the FE simulations are investigated. The comparison results depict that the friction modeling at the tool-chip interface has significant influence on the FE simulations of machining. Specifically, variable friction models that are developed from the experimentally measured normal and frictional stresses at the tool rake face resulted in most favorable predictions. Predictions presented in this work also justify that the FE simulation technique used for orthogonal cutting process can be an accurate and viable analysis as long as flow stress behavior of the work material is valid at the machining regimes and the friction characteristics at the tool-chip interface is modeled properly.     

Vegetation water content during SMEX04 from ground data and Landsat 5 Thematic Mapper imagery

Vegetation water content is an important parameter for retrieval of soil moisture from microwave data and for other remote sensing applications. Because liquid water absorbs in the shortwave infrared, the normalized difference infrared index (NDII), calculated from Landsat 5 Thematic Mapper band 4 (0.76-0.90 μm wavelength) and band 5 (1.55-1.65 μm wavelength), can be used to determine canopy equivalent water thickness (EWT), which is defined as the water volume per leaf area times the leaf area index (LAI). Alternatively, average canopy EWT can be determined using a landcover classification, because different vegetation types have different average LAI at the peak of the growing season. The primary contribution of this study for the Soil Moisture Experiment 2004 was to sample vegetation for the Arizona and Sonora study areas. Vegetation was sampled to achieve a range of canopy EWT; LAI was measured using a plant canopy analyzer and digital hemispherical (fisheye) photographs. NDII was linearly related to measured canopy EWT with an R² of 0.601. Landcover of the Arizona, USA, and Sonora, Mexico, study areas were classified with an overall accuracy of 70% using a rule-based decision tree using three dates of Landsat 5 Thematic Mapper imagery and digital elevation data. There was a large range of NDII per landcover class at the peak of the growing season, indicating that canopy EWT should be estimated directly using NDII or other shortwave-infrared vegetation indices. However, landcover classifications will still be necessary to obtain total vegetation water content from canopy EWT and other data, because considerable liquid water is contained in the non-foliar components of vegetation.     

Developing Oregon’s renewable energy portfolio using fuzzy goal programming model

Renewable energy continues to be a hot topic in the United States affecting security and sustainability. A model to create renewable energy portfolio is established using guidelines drawn by Oregon’s Renewable Portfolio Standard (RPS) legislation with the objective of responding to a 25% of the state electricity demand by renewable resources in 2025. The fuzzy goal programming model is adaptable to accommodate changes in energy costs and future advances in technology maturity. It can also take into consideration the preferences of policy-makers and stakeholders. This model can help to reveal the costs and benefits of complex decisions regarding renewable energy.     

Design of a decision support system for machine tool selection based on machine characteristics and performance tests

Economic globalization, together with heightened market competition and increasingly short product life cycles are motivating companies to use advanced manufacturing technologies. Use of high speed machining is increasingly widespread; however, as the technology is relatively new, it lacks a deep-rooted knowledge base which would facilitate implementation. One of the most frequent problems facing companies wishing to adopt this technology is selecting the most appropriate machine tool for the product in question and own enterprise characteristics. This paper presents a decision support system for high speed milling machine tool selection based on machine characteristics and performance tests. Profile machining tests are designed and conducted in participating machining centers. The decision support system is based on product dimension accuracy, process parameters such as feed rate and interpolation scheme used by CNC and machine characteristics such as machine accuracy and cost. Experimental data for process error and cycle operation time are obtained from profile machining tests with different geometrical feature zones that are often used in manufacturing of discrete parts or die/moulds. All those input parameters have direct impact on productivity and manufacturing cost. Artificial neural network models are utilized for decision support system with reasonable prediction capability.     

Interface feature prioritization for web services: Case of online flight reservations

Acceptance, utility, and usability of system designs have become a focal interest in human–computer interaction (HCI) research, yet at present there is a lack detailed understandings of which system design features influence them. The purpose of the study is to examine the effects of five product design features; customization, adaptive behavior, memory load, content density, and speed on user preference through an experimental study by using conjoint analysis. In experimental study, instead of classical conjoint cards, prototypes were generated for products. Besides, desirability and market segments of product prototypes were identified. In line with the results, among the five product design features, speed is the most and customization is the least important features that affect user preference. Contrary to the expectations, customization has a relatively small importance value in this research. Subsequent design features that influence user preference after speed are minimal memory load, adaptive behavior, and content density, respectively. According to findings, interfaces that have high-speed, minimal memory load, adaptive behavior, low content density, and customization features are more preferable than those that do not.     

Diagnostic value of determining hemoglobin in cerebrospinal fluid in acute cerebral circulatory disorders

The results of hemoglobin determination in the CSF by the method of fluorescence microscopy in 195 patients speaks in favor of relative diagnostical importance of hemoglobin in the supra fall-out CSF for establishing the character of the stroke. The following circumstances testify to this fact: 1) in an artificial admixture of blood in the CSF in some cases there may be hemolysis of "passing" erythrocytes; 2) in a genuine admixture of blood, tests of hemoglobin in the centrifugate of the CSF may be negative since in some cases the transition of hemoglobin into bilirubin in the subarachmoid space occurs more rapidly than the hemolysis of erythrocytes. Thus, the hemoglobin does not accumulate in the liquid in quantities, sufficient enough to be measured by the existing methods; 3) in a large amount of artificial blood admixture, even without a hemolysis of "passing" erythrocytes the hemoglobin tests in the centrifugate of the CSF may be positive at the expense of hemoglobin of the blood plasma.