Watermarked 3-D Mesh Quality Assessment

This paper addresses the problem of assessing distortions produced by watermarking 3D meshes. In particular, a new methodology for subjective evaluation of the quality of 3D objects is proposed and implemented. Two objective metrics derived from measures of surface roughness are then proposed and their efficiency to predict the perceptual impact of 3D watermarking is assessed and compared with the state of the art. Results obtained show good correlations between the proposed objective metrics and subjective assessments by human observers     

Kinetic investigation of the carbothermal reduction of an Iranian clay

The kinetics of the carbothermal reduction of clay under argon atmosphere has been investigated by the X-ray diffraction method. The clay-carbon (excess) mixture was formed into 2 cm diameter disks of different thicknesses. Experimental data evidences the significant effect of sample thickness on the reaction rate at 1400 °C. Decreasing thickness promotes mullite dissociation and formation of SiC and alumina powders. Mathematical modeling of the reaction system showed the gas diffusion in the Knudsen regime through the pellet to be the rate controlling step. Diffusivity of CO and reacted core tortuosity factor have been calculated.     

Effect of microwave sintering on the microstructure and electrical properties of low-voltage ZnO varistors

Coarse-grained ZnO varistors for low-voltage applications were prepared by microwave sintering technique under different soaking times of 5–150?min. For comparison, a low-voltage ZnO varistor was also prepared through a conventional sintering process. Microwave sintering remarkably enhanced the grain growth rate of ZnO varistors. Average grain size of the sample prepared by microwave sintering in 15?min was about 20?µm, which is similar to the grain size of sample prepared conventionally in 150?min time. In addition to grain growth, an increase in microwave sintering time led to precipitation of zinc titanate (Zn₂TiO₄) on the top surface of samples which sintered for long dwell times. X-ray diffraction and scanning electron microscopy results from different points of the samples declared that precipitation of Zn₂TiO₄ phase is due to the high rate of bismuth evaporation of Bi-rich liquid from top surface and the reaction between remaining titanium ions on the surface with ZnO. The results showed that increasing sintering time from 5 to 150?min increased the grain size from 14 to 33?µm, consequently, the breakdown field decreased from 90 to 27?V/mm, respectively. These changes led to a switch in the varistor application, from low to very low voltage.     

BNC-VLA: bayesian network structure learning using a team of variable-action set learning automata

Bayesian Network (BN) is a probabilistic graphical model which describes the joint probability distribution over a set of random variables. One of the most important challenges in the field of BNs is to find an optimal network structure based on an available training dataset. Since the problem of searching the optimal BN structure belongs to the class of NP-hard problems, typically greedy algorithms are used to solve it. In this paper a learning automata-based algorithm has been proposed to solve the BNs structure learning problem. There is a learning automaton corresponding with each random variable and at each stage of the proposed algorithm, named BNC-VLA, a set of learning automata is randomly activated and determined the graph edges that must be appeared in that stage. Finally, the constructed network is evaluated using a scoring function. As BNC-VLA algorithm proceeds, the learning process focuses on the BN structure with higher scores. The convergence of this algorithm is theoretically proved; and also some experiments are designed to evaluate the performance of it. Experimental results show that BNC-VLA is capable of finding the optimal structure of BN in an acceptable execution time; and comparing against other search-based methods, it outperforms them.     

Microstructural and microwave dielectric properties of LZT (Li2ZnTi3O8) ceramics sintered in presence of bismuth borate glass for LTCC applications

In the present research, the Li₂ZnTi₃O₈(LZT) ceramics were synthesized throughout solid-state ceramic processing, then mixed with bismuth borate (BiBO) glass prepared based on conventional melt quenching method. Wetting behavior of BiBO glass on the LZT ceramic substrate was monitored by hot stage microscopy. Afterward, dielectric LZT ceramics containing different amounts of BiBO glass (0.25–6 wt%) were sintered at various temperatures. X-ray diffraction and electron back scatter diffraction examinations revealed the presence of two crystalline phases of Li₂ZnTi₃O₈ and Bi₂Ti₂O₇. The maximum value of relative density (above 95%) was obtained in the case of specimens contained more than 5 wt% glass. The microwave dielectric properties of the finally sintered BiBO glass containing LZT ceramics were as follows: dielectric constant (ε_r) = 21.44–25.09, quality factor (Q × f) = 10839–54708 GHz and temperature coefficient of resonant frequency (τ_f) = (? 15.58) ? (? 12.86)ppm/°C.     

Nanosilicon carbide/hydroxyapatite nanocomposites: structural,mechanical and in vitro cellular properties

In this study, bioceramic nanocomposites were synthesized by sintering compacted bodies of hydroxyapatite (HA) mixed with 5 or 15 wt% nanosilicon carbide at 1100 or 1200°C in a reducing atmosphere. Pure hydroxyapatite was also prepared for comparison. Phase compositions, structural and physical properties of the composites were studied using appropriate techniques. Some in vitro biological properties of the composites were also investigated by using newrat calvaria osteoblastic cells. X-ray diffraction analysis indicated that tricalcium phosphate (TCP) comprising negligible α-TCP and considerable β-TCP were formed in composites during sintering meanwhile hydroxyapatite and silicon carbide (SiC) were also existed in the composition. Based on the results, that composite made of 5 wt% nanosilicon carbide exhibited higher bending strength, fracture toughness and bulk density than pure HA and composite with 15 wt% silicon carbide. The scanning electron microscopy coupled with energy dispersive X-ray analysis revealed that the addition of nanosilicon carbide suppressed the grain growth and yielded a feature of island-type clusters consisting of blistered calcium phosphate (HA and TCP) and SiC grains. Also, in this study, better proliferation rate and alkaline phosphatase activity were observed for the osteoblastic cells seeded on top of the composites compared to pure HA. Overall, the results indicated that the composite of 95 wt% hydroxyapatite and 5 wt% SiC exhibited better mechanical and biological properties than pure HA and further addition of SiC failed strength and toughness.     

Microwave-assisted synthesis and sintering of mullite

Mullitization behaviour of a mixture of clay and alumina as the starting materials was examined by microwave heating of (a) mixed powder and (b) compacted powder samples for different soaking times. X-ray diffraction results showed that in compacted samples mullitization process was completed after 20 min heating with a density of about 87%. Densification and microstructure of samples with different green densities heated in a microwave oven and conventional electric furnace were compared. Results showed that the grain growth of mullite was restricted by microwave heating.     

Effect of SiC particles on rehological and sintering behaviour of alumina–zircon composites

The effect of additions of SiC particulates on rheological and sintering behaviour of slip-cast alumina–zircon composites has been investigated. Finely divided alumina, zircon and silicon carbide powders were first processed into slips, using polyacrylite dispersant (0.5 wt.%) to create highly concentrated, stable aqueous suspensions at 40 vol.% loadings, from which test specimens which were then slip cast and dried. They were subsequently sintered in air for 2 h at 1650 °C. Rheological properties of the prepared slips were evaluated and related to the amount of added SiC. After sintering, the resultant porosities, fractional densities, crystallographic phases present, and microstructures were determined.     

Reaction sintering of nano-sized ZnO–Nb2O5 powder mixture: sintering,microstructure and microwave dielectric properties

Sintering behavior, microstructures and microwave dielectric properties of ZnNb₂O₆ (ZN) ceramics prepared by reaction-sintering method were investigated. The X-ray diffraction patterns of the sintered samples revealed single-phase formation with a columbite structure after 1–5 h sintering at 1,025–1,125 °C. After sintering at 1,125 °C for 5 h, the ZN ceramics with the density of 5.56 g/cm³ (98.9 % of the theoretical density) and good microwave dielectric properties of ε_r = 23.9, Q × f = 51,000 and τ_f = ?62 ppm/°C were obtained. The obtained results demonstrated that the reaction-sintering process is a simple and effective method to prepare the ZN ceramics for applications on microwave dielectric resonators.     

Synthesis of nanocomposite powders of γ-alumina-carbon nanotube by sol–gel method

The nanocomposite powders of γ-alumina-carbon nanotube were successfully synthesized by a sol–gel process. The homogeneous mixture of carbon nanotubes and alumina particles was obtained by mixing the carbon nanotubes within alumina solution and followed by heating into gel. The resultant gel was dried and calcined at 200 °C into boehmite-carbon nanotubes composite powders. The mean particle size of synthesized boehmite was of the order of 4 nm. The boehmite-carbon nanotubes composite powders were calcined at different temperatures and XRD investigations revealed that as the amount of carbon nanotube increases, γ- to α-alumina phase transformation is completed at higher temperatures. The specific surface area and mean particle size of resultant nanocomposite powders increased and decreased, respectively by increasing the content of carbon nanotubes.