Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

Contribution of metal vapor mass at periphery part of pulsed arc to electromagnetic force in weld pool

The arc welding has been used in various welding methods because it is inexpensive and high in strength after welding. However, it is a problem that accidents such as collapse of the bridge occur because of the welding defects. The welding of low cost and high productivity is required without the welding defects. The pulsed TIG welding is inexpensive and capable of high‐quality welding. The electromagnetic force contributing to penetration changes because the transient response of arc temperature and iron vapor generated from anode occurs. However, the analysis of pulsed TIG welding with metal vapor has been elucidated only metal vapor concentration near anode with transient phenomenon and heat flux. Thus, the theoretical elucidation of penetration depth with control factor has not been researched. In this paper, the contribution of metal vapor mass at the periphery part of pulsed arc to the electromagnetic force in the weld pool is elucidated. As a result, the iron vapor mass at periphery part decreased with increasing the frequency. The iron vapor was stagnated at axial center within one cycle. The electromagnetic force to the penetration depth direction in weld pool increased at axial center. Therefore, the metal vapor mass at periphery part plays an important role for the electromagnetic force increment at axial center.     

Preparation and antibacterial activity of novel fluoroalkyl end-capped oligomers/silica nanocomposites-encapsulated low molecular biocides

Fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomer [R_F-(DOBAA) _n -R_F] reacted with tetraethoxysilane (TEOS) and silica nanoparticles in the presence of low-molecular weight biocides such as hibitane, hinokitiol, and hinokioil under alkaline conditions to afford R_F-(DOBAA) _n -R_F/silica nanocomposites-encapsulated these biocides in excellent to moderate isolated yields. Fluoroalkyl end-capped N,N-dimethylacrylamide oligomer [R_F-(DMAA) _n -R_F] and acrylic acid oligomer [R_F-(ACA) _n -R_F]/silica nanocomposites-encapsulated hibitane were obtained under similar conditions. Dynamic light scattering measurements showed that the size of these fluorinated nanocomposites-encapsulated biocides thus obtained is nanometer size-controlled. Additionally, these fluorinated nanocomposites were shown to have a good dispersibility and stability in methanol and water. Of particular interest, these fluorinated nanocomposites-encapsulated biocides were found to have a good antibacterial activity against Staphylococcus aureus, and these nanocomposites were applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate).     

Pressure anomaly in the paramagnetic region of bcc solid3He

The isochoric pressure of bcc Solid³He in the vicinity of the triple point has been measured by changing the temperature stepwisely and waiting for thermal equilibrium. We observed anomalous pressure kinks of the temperature dependence in the paramagnetic region near the triple point. This anomaly appeared at 0.37 to 0.40 tesla, and disappeared below 0.36 tesla. Moreover, critical phenomena at the transition point from the paramagnetic phase (PP) to the high field phase was observed and the phase line curves toward the PP side.     

Characteristics of hydrogen-fueled gas turbine cycle with intercooler,hydrogen turbine and hydrogen heater

The performances of a hydrogen-fueled gas turbine cycle equipped with an intercooler, regenerator, hydrogen turbine and recuperative hydrogen heater are analyzed. The intercooler is very effective to prevent the condensation and freezing of water vapor in cooling the suction air. The operation of hydrogen turbine in low-temperature range can also be prevented by adopting hydrogen heater. Thermodynamic analysis has revealed that the thermal efficiency and the specific output are considerably improved compared to those of the simple gas turbine cycle.     

Facile optical resolution of amino acid esters via hydrolysis by an industrial enzyme in organic solvents

Racemic amino acid esters were optically resolved via hydrolysis in organic solvents by the catalysis of an industrial alkaline protease, “Alcalase”. The products which were composed mainly of L-amino acids were insoluble and easily separated by filtration. The activity of the enzyme and enantiomeric excess of the products were significantly dependent on the nature of solvent and the water content in the reaction media. Generally, high values of enantiomeric excess were obtained at low water contents. Many natural and unnatural amino acids were resolved by this method.     

Synthesis and surface properties of novel fluoroalkyl end-capped amphiphilic fullerene cooligomers

New fluoroalkyl end-capped fullerene cooligomers were prepared by the reactions of fluoroalkanoyl peroxides with fullerene and comonomers such as acryloylmorpholine, N,N-dimethylacrylamide and acrylic acid. These fluorinated fullerene cooligomers were easily soluble in water and common organic solvents, and were able to reduce the surface tensions of both water and benzene, quite effectively. Additionally, these fullerene cooligomers were found to form a stable monomolecular film at the air-water interface, and the modified polystyrene surface treated with these cooligomers was shown to have a strong hydrophilicity with good oil repellency.     

Characterization of the cell leakage of a stacked trench capacitor(STT) cell

The cell leakage of a stacked trench capacitor (STT) cell has been investigated. The major leakage mechanisms of the STT are trench-to-trench leakage, trench junction leakage, and LOCOS isolation leakage. It is shown that compared to a conventional trench capacitor, the trench-to-trench leakage current is reduced and high punchthrough voltage is obtained. Therefore, the trench-to-trench spacing can be reduced 0.1 μm shorter than that of the trench capacitor. These reductions result from the STT structure itself. The surface leakage current, which is the dominant leakage current in the trench capacitor, does not flow in the STT. This paper also describes the effect of the sidewall damage caused by trench etching on the trench junction leakage. Reactive ion etching (RIE) produces deep levels just beneath the trench surface. But, the trench junction of the STT is not influenced by these deep levels because the trench surface is covered by a n^-diffused layer. This paper also investigates the relationship between the cell leakage and the retention time. At DRAM operation temperatures, LOCOS isolation leakage is dominant rather than trench junction leakage. Therefore, the deeper trench can increase the storage capacitance and improve the retention time     

Focusing characteristics of a wide-striped laser diode integratedwith a microlens

We developed a wide-striped laser diode integrated with a microlens that provides good focusing characteristics through a small focusing spot. We calculated and demonstrated that a 60-μm-wide core and a 1.9-μm-high ridge is the best structure for fundamental index-guiding mode oscillation of a wide-striped laser diode. We integrated a wide-striped laser diode with the developed microlens in the Fresnel diffraction held, and demonstrated that a device with a 60-μm-wide core has a minimum focusing spot width of 2.0 μm in the horizontal direction. Also, we estimated the wavefront in the Fresnel diffraction field from the working distance error of a lens designed for a collimated incident beam, and showed that the working distance error, focusing spot width, and sidelobe can be improved by this estimated wavefront