Performance of surface ionic conduction single chamber fuel cell prepared by the sol gel method

The performance of surface ionic conduction single chamber fuel cell (SIC‐SCFC) prepared by the sol gel method was studied on electric characteristics due to the differences of the operating temperature and humidity, the electrode distance and electrolyte film depth, and multiple cells with the series and parallel connections. The SIC–SCFC was arranged the both anode of Pt and cathode of Au on the boehmite electrolyte. The open circuit voltage (OCV) of single cell achieved a maximum of 530mV in the dry gas mixtures of O₂/H₂=50% in room temperature operation, and but it became decrease as over 60%. The OCV was maintained the constant value between operating temperatures of 30°C to 80°C, and but it was decreased sharply at over 90°C because a humidity on the cell became lower as increasing operating temperature. Then, the cell property was improved to 120°C by adding to the humidity of 70% using a humidifier. The electrode distance and the electrolyte film depth of SIC‐SCFC found to be contributed to the reductions of the cell resistance and the surface roughness on the electrode, respectively. Moreover, the power property of SIC‐SCFC was significantly improved by cell stacks comprised of the series or parallel connection of a cell.     

A parallel and scalable algorithm for ADI method with pre-propagation and message vectorization

It is hard to implement the ADI method in an efficient way on distributed-memory parallel computers. We propose “P-scheme” which parallelizes a tridiagonal linear system of equations for the ADI method, but its effectiveness is limited to the cases where the problem size is large enough mainly because of the communication cost of the propagation phase of the scheme.

In order to overcome this difficulty, we propose an improved version of the P-scheme with “message vectorization” which aggregates several communication messages into one and alleviates the communication cost. Also we evaluate the effectiveness of message vectorization for the ADI method and show that the improved version of the P-scheme works well even for smaller problems and linear and super-linear speedups can be achieved for 8194 × 8194 and 16,386 × 16,386 problems, respectively.     

Bolted tension flanges joining square hollow section members

Tests and theoretical analysis on the maximum strength of high strength bolted tension flanges joining square hollow section members have been carried out. Yield line theory has been applied in a similar way to that presented in a previous paper. Correlation between test results and theoretical predictions is quite satisfactory. Based on this study, a simple design formula has been proposed.     

氧浓度对近临界水中纤维素分解的影响

研究了不同初始氧浓度对纤维素在近临界水中分解的影响，实验结果表明，氧浓度显著地影响产物总碳收支平衡，液相不同组分的收率、气体的产量以及气相产物的组成，微量氧对产物总碳收支平衡影响不大，而对液相不同组分的收率有一定的影响。从实验结果可以看出，离子型反应机理在纤维素水解的第一步中起主导作用。而单糖的进一步分解是一个以自由基反应机理为主的过程。     

Superconductivity in W-containing diamond-like nanocomposite films

Superconductivity in a tungsten-containing carbon-oxide film was reported. The film with 500 nm thickness was deposited onto polycrystalline silicon oxides using chemical vapor deposition and the co-sputtering of a tungsten metal target. The bonding state of the carbon atoms and the macroscopic and microscopic crystal structure of the film were investigated by Raman spectroscopy, X-ray diffraction and transmission electron microscopy measurements. From the experimental results, we determined that this film essentially had an amorphous structure. The temperature dependence on resistivity was measured in the temperature range of 2–300 K. Resistive superconducting transition was observed at 3.8 K. The dc magnetizations were measured in the temperature range of 1.8–6.5 K. The diamagnetism resulting from a superconductive state was observed below 3.75 K, which is consistent with a resistive superconducting transition. It is thought that the finite sized clusters of the different superconductive transition temperatures cooperatively produce a macroscopic superconducting phenomenon.     

Temperature Dependence of the Raman Spectrum in Lithium Oxide Single Crystal

Temperature dependence of the Raman spectrum of lithium oxide single crystal has been measured over a temperature range of 80 to 1073 K. The frequency shift and the line width of the Raman spectrum in lithium oxide were about 531 and 4.5 cm^-1 at 80 K, respectively. At 1073 K, the frequency shift and the line width attained the values of 464 and 112 cm^-1, respectively. The strong temperature dependence of the frequency shift and line width was compared with data from some crystals with a fluorite structure.     

Solving regularized least squares with qualitatively controlled adaptive cross‐approximated matrices

The adaptive cross‐approximation (ACA) technique is applied to accelerating an inverse‐problem solver that estimates charge distribution on a dielectric spacer. The ACA generates an approximated system‐matrix that enables us to carry out high‐speed inverse calculation. We designed an approximation procedure based on ACA with some additional concepts, that is, (a) partitioning of matrix based on algebraic information, (b) approximation quality control based on matrix norms, and so on. The tested solver (LSQR for regularized least squares) with ACA demonstrates about 10 times faster performance than that without ACA. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(3): 10–18, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20326     

Simulation with an improved plasma model utilized to design a new structure of microwave plasma discharge for chemical vapor deposition of diamond crystals

A new structure of microwave plasma for chemical vapor deposition of diamond crystal is proposed. The structure is designed numerically, for which an improved model given in our previous work [H. Yamada et al., J. Appl. Phys. 101 (2007), art. no. 063302.] is utilized. The experimental observations and numerical predictions agree well with each other. It is demonstrated experimentally that the proposed structure can achieve a growth rate larger than 50 μm/h over an area 1 in. in diameter.     

An effect of microstructure on the interface resistance between a perovskite-type oxide electrode and yttria-stabilized zirconia

The electrode characteristics of perovskite-type oxides, La_0.6Sr_0.4CoO₃ and La_0.6Sr_0.4MnO₃, on ceria-based oxide and stabilized zirconia were analysed by the a.c. impedance method. The ionic conductivities of the electrolyte and electrode conductivities from the a.c. impedance analysis agreed with those obtained from the current interruption and d.c. four-probe methods. Two semicircles from the charge transfer and diffusion processes appeared as the electrode resistance. The relative contribution of these two processes to the overall electrode resistance strongly depended on the microstructure of the electrode. The electrode microstructure could be controlled by the dispersion medium used for the electrode slurry. The La_0.6Sr_0.4MnO₃ electrode coated with n-butyl acetate slurry exhibited the smallest electrode resistance.     

Online-Religion in Japan: Websites and Religious Counseling from a Comparative Cross-Cultural Perspective

This article considers the nature of online religion by examining the websites and religious counseling activities conducted by new Japanese religions. Beginning with an overview of the widespread use of the Internet in Japan and its use in religion, the article examines the cultural and social factors that keep the religious use of the Internet from becoming as pervasive in Japan as it is in the U.S. The article then describes a website with elements of online religion and the Internet-based religious counseling services being provided by ministers of the new Shintō-derived religions of Konkōkyō and Tenrikyō. These activities have successfully given some people who need religious assistance access to religious teaching. In concluding, the article examines the reasons for the success of these efforts, as well as the reasons why they have not expanded in scope, in light of the cultural and organizational advantages and disadvantages that affect Internet use.