The effects of surface-modified graphene nanoplatelets on the sliding wear properties of basalt fibers-reinforced epoxy composites

Possessing unique designs and properties absent in conventional materials, nanocomposites have made a remarkable imprint in science and technology. This is particularly true regarding the polymer matrix composites when they are further reinforced with nanoparticles. In this study, the effects of different weight percentages (0, 0.1, 0.2, 0.3, 0.4, and 0.5) of surface-modified graphene nanoplatelets (GNPs) on the microhardness and wear properties of basalt fibers/epoxy composites were investigated. The GNPs were surface modified by silane, and the composites were made by the hand lay-up method. The wear tests were conducted under two different loads of 20 and 40 N. The best wear properties were achieved at 0.3 wt % GNPs as a result of the GNPs' self-lubrication property and the formation of a stable transfer/lubricating film at the pin and disk interface. Moreover, the friction coefficient was lower at the higher normal load of 40 N. The microscopic studies by FESEM and SEM showed that the presence of GNPs up to 0.3 wt % led to the stability of the transfer/lubricating film by enhancing the adhesion of the basalt fibers to the epoxy resin. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47986.     

Introduction

The Journal of Supercomputing -     

Application of an immobilized microbial consortium for the treatment of pharmaceutical wastewater: Batch-wise and continuous studies

In the present investigation, a microbial consortium consisting of four bacterial strains was selected for the treatment of pharmaceutical industry wastewater. The consortium was immobilized on a natural support matrix-Luffa and used for the treatment of real-time pharmaceutical wastewater in batch and continuous processes. The batch process was carried out to optimize the culture conditions and monitor the enzymatic activity. An array of enzymes such as alcohol dehydrogenase, aldehyde dehydrogenase, monooxygenase, catechol 2,3-dioxygenase and hydroquinol 1,2-dioxygenase were produced by the consortium. The kinetics of the degradation in the batch process was analyzed and it was noted to be a first-order reaction. For the continuous study, an aerobic fixed-film bioreactor (AFFBR) was utilized for a period of 61 days with variable hydraulic retention time (HRT) and organic loading rate (OLR). The immobilized microbes treated the wastewater by reducing the COD, phenolic contaminants and suspended solids. The OLR ranged between (0.56 ± 0.05) kg COD·m^-3 d^-1 to 3.35 kg COD·m^-3·d^-1 and the system achieved an average reduction of 96.8% of COD, 92.6% of phenolic compounds and 95.2% of suspended solids. Kinetics of the continuous process was interpreted by three different models, where the modified Stover Kincannon model and the Grau second-order model proved to be best fit for the degradation reaction with the constant for saturation value, KL being 95.12 g·L^-1·d^-1, the constant for maximum utilization of the substrate U_max being 90.01 g·L^-1 d^-1 and substrate removal constant K_Y was 1.074 d^-1 for both the models. GC-MS analysis confirmed that most of the organic contaminants were degraded into innocuous metabolites.     

Biofilm reduction,cell proliferation,anthelmintic and cytotoxicity effect of green synthesised silver nanoparticle using Artemisia vulgaris extract

Infectious diseases are caused by etiological agents. Nanotechnology has been used to minimise the effect of clinical pathogens which have resistance to antibiotics. In current research synthesis, characterisation and biological activities of green synthesised nanoparticles using Artemisia vulgaris extract have been done. The characterisation of AgNPs was carried out using Fourier transform infrared spectroscopy, UV‐Vis spectrophotometry, and scanning electron microscopy. Anti‐biofilm, cell viability, antibacterial, brine shrimp lethality, and deoxyribonucleic acid protection effects have been screened. UV‐Vis spectra showed the absorption peak of synthesised nanoparticles at 400 nm. FT‐IR indicated the involvement of the functional group in the preparation of AgNPs. SEM showed the spherical shape of AgNPs with 30 nm diameter. Biological screening results revealed the antibacterial effect against clinical bacterial pathogens. Biofilm reduction and cell viability assay also supported the antibacterial effect. Cytotoxicity effect was recorded as 100% at 200 μg/ml through brine shrimp lethality assay. Protein kinase inhibition zones recorded for AgNPs (16 mm bald) compared with A. vulgaris extract (11 mm bald). It has been concluded that green synthesised AgNPs are more effective against infectious pathogens and could be used as a potential source for therapeutic drugs.Inspec keywords: cellular biophysics, toxicology, silver, nanoparticles, nanomedicine, diseases, microorganisms, ultraviolet spectra, visible spectra, Fourier transform infrared spectra, enzymes, molecular biophysicsOther keywords: biofilm reduction, cell proliferation, anthelmintic effect, cytotoxicity effect, green synthesised silver nanoparticle, Artemisia vulgaris extract, infectious diseases, aetiological agents, Fourier transform infrared spectroscopy, UV‐Vis spectrophotometry, scanning electron microscopy, SEM, antibiofilm, cell viability, brine shrimp lethality, deoxyribonucleic acid protection effects, AgNP, cytotoxicity, protein kinase inhibition zones, therapeutic drugs     

Is team training in briefings for surgical teams feasible in simulation?

We developed a module for surgical team training using briefings in simulated crisis scenarios and here we report preliminary findings. Nine surgical teams (34 trainees) participated in a pre-training simulation, followed by an interactive workshop on briefing and checklists, and then a post-training simulation. Both technical and non-technical skills were assessed via observation during simulations by expert trainers who provided feedback on performances at the end of simulation. Trainees also reported their attitudes to briefings and evaluated the training. Pre-training attitudes to briefing were positive, some of which improved post-training and trainees’ evaluation of the training was positive. Surgeons’ technical skill improved significantly post-training, but their decision-making skill was rated lower than other non-technical skills, compared to other trainees. The training did not appear to greatly improve non-technical skill performance. Training surgical teams in simulation is feasible but much more work is needed on measurement development and training strategy to confirm its efficacy and utility.     

Equilibrium and kinetic studies of azo dye (Basic Red 18) adsorption onto montmorillonite: Numerical simulation and laboratory experiments

Adsorption of BR 18 dye onto nano-clay adsorbent was investigated. Nano-clay was characterized by using FTIR, SEM, TEM, XRD and BET analysis. The percent removal increased by increasing nano-clay dose, while pH and stirring speed had no significant effect on the adsorption rate. It was observed that the uptake of dye onto nano-clay initially increased rapidly, and then decreased slowly until the equilibrium was reached. The adsorption capacity rose with an increase in temperature. Moreover, the adsorption kinetics was very fast and followed a pseudo second-order. The intra-particle diffusion was observed to be the rate-controlling step. In addition, equilibrium data fitted well with the Langmuir adsorption model. This paper also presents a numerical simulation incorporating the second-order kinetic expression using COMSOL Multiphysics software. The numerical modelling results and the experimental data were in excellent agreement.     

Application of the dry‐spinning method to produce poly(ε‐caprolactone) fibers containing bovine serum albumin laden gelatin nanoparticles

We designed and manufactured a polymeric system with combined hydrophilic–hydrophobic properties by loading gelatin nanoparticles (GNPs) containing bovine serum albumin (BSA) into poly(ε‐caprolactone) (PCL) fibers. Our ultimate goal was to create a device capable of carrying and releasing protein drugs. Such a system could find several biomedical applications, such as those in controlled release systems, surgical sutures, and bioactive scaffolds for tissue engineering. A two‐step desolvation method was used to produce GNPs, whereas PCL fibers were produced by a dry‐spinning method. The morphological, mechanical, and thermal properties of the produced system were investigated, and the distribution of nanoparticles both inside and on the surface of the fibers was examined. The effect of the particles on the biodegradability of the fibers was also evaluated. In vitro preliminary tests were performed to study the release of BSA from nanoparticle‐laden fibers and to compare this with its release from free nanoparticles. Our results indicate that the distribution of particles inside the fibers was quite homogeneous and only a few of them were present on the surface. The presence of the particles in the fibers did not affect the thermal properties of the PCL polymer matrix, although it created voids that affected the degradation characteristics so the PCL fibers favored faster erosion compared to the plain fibers. Preliminary results indicate that the release from GNP‐laden fibers occurred much more slowly compared to that in the free GNPs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44233.     

Newly designed polyacrylamide/dextran gels for electrophoresis protein separation: synthesis and characterization

Newly designed gels for electrophoresis protein separation were synthesized from acrylamide, N,N′‐methylenebis (acrylamide) and dextran mixtures. Radical polymerization was initiated by ammonium persulfate and N,N,N′,N′‐tetramethylethylenediamine. The time dependence of absorbance during polymerization was monitored using UV‐visible spectroscopy. The exothermic polymerization process exhibited a sharp rise of temperature reminiscent of the Trommsdorff effect. The swelling kinetics of the synthesized gels was examined in deionized water and buffer solutions. One of the challenges was to find an alternative to commercial products, sold as mixtures with no detailed chemical contents, commonly used in sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS‐PAGE) for protein separation. For this reason, a systematic comparison was made of the properties of one of the most commonly used commercial gels, Duracryl^? from Genomics Solution Inc., and those of the synthesized polyacrylamide/dextran gels. Copyright © 2011 Society of Chemical Industry