X-ray photoemission spectroscopy of nitrogen-doped UNCD/a-C:H films prepared by pulsed laser deposition

Nitrogen-doped ultrananocrystalline diamond (UNCD)/hydrogenated amorphous carbon (a-C:H) films were deposited by pulsed laser deposition (PLD). Nitrogen contents in the films were controlled by varying a ratio in the inflow amount between nitrogen and hydrogen gases. The film doped with a nitrogen content of 7.9 at.% possessed n-type conduction with an electrical conductivity of 18 Ω^? 1 cm^? 1 at 300 K. X-ray photoemission spectra, which were measured using synchrotron radiation, were decomposed into four component spectra due to sp², sp³ hybridized carbons, C=N and C–N. A full-width at half-maximum of the sp³ peak was 0.91 eV. This small value is specific to UNCD/a-C:H films. The sp²/(sp³ + sp²) value was enhanced from 32 to 40% with an increase in the nitrogen content from 0 to 7.9 at.%. This increment probably originates from the nitrogen incorporation into an a-C:H matrix and grain boundaries of UNCD crystallites. Since an electrical conductivity of a-C:H does not dramatically enhance for this doping amount according to previous reports, we believe that the electrical conductivity enhancement is predominantly due to the nitrogen incorporation into grain boundaries.     

Fourier transform infrared spectroscopic study of nitrogen-doped ultrananocrystalline diamond/hydrogenated amorphous carbon composite films prepared by pulsed laser deposition

Nitrogen-doped ultrananocrystalline diamond (UNCD)/hydrogenated amorphous carbon (a-C:H) composite films, which possess n-type conduction with enhanced electrical conductivities, were prepared by pulsed laser deposition and they were structurally studied by Fourier transform infrared (FTIR) spectroscopy. The film with a nitrogen content of 7.9 at.% possessed n-type condition with an electrical conductivity of 18 S/cm at 300 K. The FTIR spectra revealed peaks due to nitrogen impurities, C = N, C-N, and CH_n (n = 1, 2, 3) bands. The sp²-CH_n/(sp²-CH_n + sp³-CH_n), estimated from the area-integration of decomposed peaks, were 24.5 and 19.4% for undoped and 7.9 at.% doped films, respectively. The nitrogen-doping not only form the chemical bonds between carbon and nitrogen atoms such as C = N and C-N bonds but also facilitate the formation of both sp² and sp³ bonds, in particular, the sp³-CH_n bond is preferentially formed. From the analysis of the FTIR spectra, it was found that the hydrogen content in the film is increased with an increase in the nitrogen content. The increased hydrogen content might be owing to the enhanced volume of grain boundaries (GBs) between UNCD grains, and those between UNCD grains and an a-C:H matrix, which is caused by a reduction in the UNCD grain size. The CH_n peaks predominantly come from an a-C:H matrix and GBs. Since the nitrogen-doping for a-C:H has been known to be hardly effective, the n-type conduction with the enhanced electrical conductivities might be attributed to the sp²-CH_n formation at the GBs.     

X-ray photoemission spectroscopic study of ultrananocrystalline diamond/hydrogenated amorphous carbon composite films prepared by pulsed laser deposition

Chemical bonding configurations of ultrananocrystalline diamond (UNCD)/hydrogenated amorphous carbon (a-C:H) composite films prepared by pulsed laser ablation of graphite were investigated by X-ray photoemission spectroscopy using synchrotron radiation. The spectra were decomposed using a Voigt function after the backgrounds were subtracted by Shirley's method. A narrow full-width half-maximum of the sp³ peak is specific, which might be attributed to existence of a large number of UNCD crystallites in the film. The width was immediately broadened by an argon ion bombardment. Its value became equivalent to that of the a-C:H film after the ion bombardment in the same manner. This implies that UNCD crystallites were easily damaged and destroyed by the ion bombardment.     

EFFECT OF DISTRIBUTOR ON BUBBLE SIZE IN A CYLINDRICAL FLUIDIZED BED AT AN ELEVATED TEMPERATURE†

The effects of temperature and distributor on bubble diameter were investigated using a cylindrical fluidized bed of 147 mm in diameter. Three perforated distributors having different holes in diameter and the same ratio of holes to bed area were used. Eruption diameters of bubbles were measured using a high speed video-camera system under the following conditions: bed temperature = 300 and 600 K, bed particles = spherical glass beads of 272 μm in average size, excess gas velocity = 1-4 cm/s, and static bed height equals; 10-42 cm. The bubble diameter at 600 K was larger than that at 300 K. The difference became smaller with increasing the static bed height and with increasing the excess gas velocity. The distributor with larger holes gave larger bubbles. The effect of hole diameter of the distributor on the bubble diameter became insignificant with increasing the static bed height and with increasing the excess gas velocity.     

Efficient location aware intrusion detection to protect mobile devices

This paper addresses the problem of efficient intrusion detection for mobile devices via correlating the user’s location and time data. We developed two statistical profiling approaches for modeling the normal spatio–temporal behavior of the users: one based on an empirical cumulative probability measure and the other based on the Markov properties of trajectories. An anomaly is detected when the probability of a particular (location, time) evolution matching the normal behavior of a given user becomes lower than a certain threshold, determined by controlling the recall rate of the model of the normal user’s behavior. We used compression techniques to reduce processing overhead while maintaining high accuracy. Our evaluation based on the Reality Mining and Geolife data sets shows that the proposed system is capable of detecting a potential intrusion within 15 min and with 94 % accuracy.