Role of Acetic Acid Added to the Reaction Media for the Enantio-differentiating Hydrogenation of Methyl Acetoacetate Over a Tartaric Acid-modified Nickel Catalyst

The role of acetic acid added to the reaction media for the enantio-differentiating hydrogenation of methyl acetoacetate over a (R,R)-tartaric acid-in-situ-modified nickel catalyst was studied from the viewpoint of the hydrogenation rate during repeated runs. The hydrogenation of methyl acetoacetate on the “enantio-differentiating sites” of a tartaric acid-modified nickel catalyst was specifically accelerated by the acetic acid added to the reaction media to increase the enantio-differentiating ability of the catalyst. In order to increase the enantio-differentiating ability, the addition of acetic acid to the reaction media was required in each run during the repeated use of the catalyst.     

Oxidation Behavior of Ni-3,6, 10 wt.% Al Alloys at 800°C

The oxidation behavior of Ni and Ni-3, 6, and 10Al alloys at 800°C in an N₂–O₂ gas mixture was investigated. The mass gain of each alloy depended on both the oxidation periods and Al content. NiO scale was formed on all alloy substrates accompanied by internal oxides of Al₂O₃. Many cavities were formed at the NiO/substrate interface at shorter oxidation times, and these cavities were found to be filled by metallic Ni(Al) from the matrix in the internal-oxidation zone by the development of internal oxides. The filling of cavities by Ni(Al) was more significant on higher Al alloys, which had a higher density of internal Al₂O₃. Once metallic Ni(Al) formed along the entire NiO/substrate interface, the oxidation kinetics became the same as pure Ni. It was concluded that pure Ni filling the cavities at the interface provided a diffusion path of Ni from the substrate to the NiO scale, and that controlled the oxidation kinetics.     

Simple Method for Measuring the Peroxide Value in a Colored Lipid

We developed a simple method for quantification of the peroxide value (PV) in colored lipids on the basis of the reaction between triphenylphosphine (TPP) and oxidized oil to afford triphenylphosphineoxide (TPPO). Diphenylphosphineoxide (DPPO) was employed as internal standard. The formed TPPO was analyzed by high-pressure liquid chromatography–UV spectroscopy with absorption at 260 nm. The conditions that gave the highest correlative calibration curve between the peak area on the chromatogram and peroxide value were identified: the optimum TPP–oxidized oil mix ratio, reaction temperature, and reaction time were found to be 2:1, 40 °C, and 30 min, respectively. Linear calibration curves, passing through the origin, were obtained for PV versus TPPO and TPPO versus DPPO. The quantification limit for this method was 2.01 pmol hydroperoxyl group, which corresponds to a PV value of 0.2 meq/kg in a 10-mg oil sample. This method was used to measure the PV in colored fats and oils or lipids extracted from dark meat and processed food containing a coloring agent. Though the official method could not measure the PVs in the colored lipids, the method proposed here, which uses an inexpensive chemical reagent and machine, could. The developed method could play an important role for food quality control.     

Light scattering of ideal random copolymers in bulk

Copolymerization is a useful way of modifying the physical properties of a material to meet specific needs, but it can result in a significant light scattering loss due to dielectric fluctuations in the material. Ideal random copolymers are known to be more transparent; however, the light-scattering properties of such copolymers in bulk have not been fully studied. In this paper, two representative ideal random copolymers were synthesized: methyl methacrylate (MMA)/benzyl methacrylate (BzMA) and MMA/2,2,2-trifluoroethyl methacrylate (TFEMA). The effects of copolymer composition and polymerization temperature on the light-scattering properties were investigated. Polarized light scattering (V_V) in copolymers was more sensitive to the polymerization temperature. Higher temperatures were necessary to homogenize the dielectric fluctuations and minimize excess light scattering. However, once the heterogeneous structures vanished, the copolymer bulk exhibited low scattering losses, which are comparable with homopolymers, over the entire range of copolymer compositions.     

Change in molecular weight distribution by elution of polymers from PVA cast gel

Poly(vinyl alcohol) (PVA) cast gels with high degrees of polymerization and hydrolysis were prepared at room temperature. After sufficient exchange of the outer solvent by fresh pure water, the gel was re-dissolved in pure water at a high temperature. Using this solution, the cast gel was prepared again. This re-dissolution process was repeated again, and a third cast gel was prepared. During each swelling process after each cast-drying process, the amount of elution from the gel was measured and the molecular weight distributions of PVA in the gel as well as in the outer solvent were quantitatively evaluated. The molecular weight distribution of the eluted PVA was found to depend on that of the PVA in the gel; the average molecular weight gradually increased as the re-dissolution process was repeated, while the polydispersity indices of both the PVA from the gel and the eluted PVA decreased.     

Characteristics of neutralization of acids by newly isolated fungal cells

Soil microorganisms play an important role in maintaining soil pH at levels suitable for other soil organisms. To clarify the biological neutralization mechanism in soil, we isolated soil microorganisms showing a high ability to neutralize acids and studied their characteristics. From our taxonomic study, three isolated strains were identified as filamentous fungi, namely Mucor sp., Aspergillus fumigatus, and Aureobasidium pullulans. These strains could secrete basic materials, such as ammonia, for neutralization, grow in the medium at pH 4.0 and increase the pH of the medium to approximately 8.0. These microbial cells could neutralize not only nitric acid but also sulfuric and hydrochloric acids. The strains could also grow by utilizing nitric acid as a sole nitrogen source. In the soil containing these organisms, the pH was maintained in the neutral range by the buffering action of basic materials that they secrete. These results suggest that these fungal cells are useful for protecting the soil from acidification by acid rain.     

Exploiting Temporal Relations in Mining Hepatitis Data

Various data mining methods have been developed last few years for hepatitis study using a large temporal and relational database given to the research community. In this work we introduce a novel temporal abstraction method to this study by detecting and exploiting temporal patterns and relations between events in viral hepatitis such as “event A slightly happened before event B and B simultaneously ended with event C”. We developed algorithms to first detect significant temporal patterns in temporal sequences and then to identify temporal relations between these temporal patterns. Many findings by data mining methods applied to transactions/graphs of temporal relations shown to be significant by physician evaluation and matching with published in Medline.     

Exoskeletal meal assistance system (EMAS II) for patients with progressive muscular disease

Patients with muscle weakness such as muscular dystrophy usually need someone’s assistance in their daily activities. In order to reduce the caregiver burden and to improve quality of life (QOL) of the patients, various robotic technologies have been developed. This paper presents an exoskeletal assistance system EMAS II for the patients, which assists the upper extremity for the purpose of daily activities such as eating, writing, or other desk works. The EMAS II assists four DOF; shoulder flexion-extension, shoulder abduction-adduction, shoulder medial-lateral rotation, and elbow flexion-extension. The EMAS II has three kinds of user interfaces which are operated by residual functions of the patients, because it is important for patients’ health and initiative to use the residual functions. In order to control the four DOFs exoskeleton system using the interfaces with less DOF, the EMAS II simulates upper limb motion patterns of healthy people. The patterns are modeled by extracting correlations between the height of the wrist joint and that of the elbow joint. Therefore, users have only to control the position of their wrist joint to do tasks at a table. Through an experiment with a healthy subject, the feasibility of meal assistance by the EMAS II was confirmed. Furthermore, the system was applied to a spinal muscular atrophy patient in a clinical trial to check the usability. The experimental results indicated that the EMAS II could support the patient’s upper extremity to do tasks at a table.     

Apatite crystal in hard tissue of conodont fossils

The present study was aimed at examining the nature of apatite crystal in the tooth apparatus of a conodont fossil using transmission electron microscopy (TEM), scanning electron microscopy (SEM), laser Raman microprobe spectrometry and electron-probe microanalysis (EPMA). The hard tissue of the condont consisted of 2 layers and the organization varied with the size of the crystal. Higher magnification showed that the crystals were observed in the lattice of (100) and the central dark lines were not present. Ca, P, and F were detected in the crystal using EPMA. Our results indicate that the apatite crystal in conodont fossils is not hydroxyapatite but fluorapatite.