Separation of Indium from Acid Sulfate-Containing Solutions by Ion Exchange with Impregnated Resins

Indium separation using ion exchange resins from acidic polymetallic and very diluted solutions are investigated. Since the selectivity of commercial ion exchange resins have proven to be too low for an effective separation from solutions with high content of other metals, Lewatit® TP 208 was impregnated with common extractants to enhance its properties. By resin impregnation with D2EHPA and Cyanex 272, not only the selective indium recovery was reached but also the resin capacity was increased approx. two times. The best loading and elution performance were shown by Cyanex 272-impregnated Lewatit® TP 208, increasing the indium purity in the eluate from 0.75 % to 85 %.     

Recycling of multilayer packaging using a reversible cross-linking adhesive

Plastic-based multilayer packaging has an important function on the packaging market, but is currently not recyclable as the polymer layers used are usually thermodynamically immiscible. This work therefore follows the approach to prepare separable multilayer packaging using a packaging adhesive modified with thermally unstable adducts, and proposes a corresponding recycling process. For this purpose, typical multilayer structures (polyethylene (PE)// polyethylene terephtalate (PET), PET//aluminum, and PE//aluminum) were prepared by curing furan-/maleimide-functionalized polyurethane (PU)-prepolymers with a three-functional cross-linking agent. Adhesions of up to over 3N per 15 mm test specimen were measured or substrate failures of PET films were observed. However, heating in dimethylsulfoxide, the retro-Diels–Alder reaction takes place and the cross-linked adhesive turns thermoplastic and dissolves in the solvent. Thus, the laminate separates and the pure PE, PET, and aluminum foils can be recovered without any PU residue.     

Structure−Activity Relationships of Cinnamate Ester Analogues as Potent Antiprotozoal Agents

Protozoal infections are still a global health problem, threatening the lives of millions of people around the world, mainly in impoverished tropical and sub-tropical regions. Thus, in view of the lack of efficient therapies and increasing resistances against existing drugs, this study describes the antiprotozoal potential of synthetic cinnamate ester analogues and their structure-activity relationships. In general, Leishmania donovani and Trypanosoma brucei were quite susceptible to the compounds in a structure-dependent manner. Detailed analysis revealed a key role of the substitution pattern on the aromatic ring and a marked effect of the side chain on the activity against these two parasites. The high antileishmanial potency and remarkable selectivity of the nitro-aromatic derivatives suggested them as promising candidates for further studies. On the other hand, the high in vitro potency of catechol-type compounds against T. brucei could not be extrapolated to an in vivo mouse model.     

When will smart antennas be ready for the market? Part I

This work aims to shed more light on the issue of why smart antennas haven't yet penetrated the market despite all the research efforts that have been put into the technology. The paper looks at this issue from various perspectives and subdivides the discussions into fixed or nomadic and high mobility applications because of the different types of markets, demands, and technological barriers.     

Influence of doping on the electronic structure of (La,Sr)2CuO4

High-statistics (>4 × 10⁸ counts), room-temperature measurements of the electron-positron momentum density of La_2?x Sr _x CuO₄ have been performed for samples with Sr concentrations of x=0.0, 0.1, 0.13, and 0.2. These spectra have been analyzed in conjunction with theoretical calculations of the electron-positron momentum density. The metallic samples show features consistent with the presence of a Fermi surface, but its evolution with increasing Sr concentration does not follow the predictions of band theory. These results may indicate the effects of electron-electron correlation on the electron momentum distribution in the Cu-O plane.     

Pulmonary function after one-lung ventilation in newborns: the basis for neonatal thoracoscopy

BACKGROUND: To maintain good exposure during major video-assisted thoracic surgery it is necessary to deflate completely the ipsilateral lung. However, little is known about the effects of one-lung ventilation (OLV) on pulmonary function in newborn patients. METHODS: Ten neonatal domestic pigs with a mean age of 6+/-0.6 days were intubated and ventilated in pressure-controlled mode (inspired oxygen fraction=1.0). One-lung ventilation was maintained for 120 minutes. Serial measurements of hemodynamics and gas exchange were done before, during, and until 90 minutes after OLV. Pulmonary function testing was performed before and after OLV for each lung separately. RESULTS: With the inspired oxygen fraction set at 1.0, arterial oxygen saturation remained stable at 100% during OLV. Venous admixture and alveolar-arterial oxygen tension gradient increased slightly from the baseline value of 2.6% +/-0.3% to 3.8%+/-0.3% during OLV (mean+/-standard error of the mean; p=0.02), and from 358+/-28 to 407+/-18 mm Hg (not significant), respectively. Both values returned to baseline during the subsequent ventilation of both lungs. Static compliance and resistance of the ventilated lung did not change. Compliance of the collapsed lung decreased after reexpansion from 0.42+/-0.07 to 0.29+/-0.06 mL x cm H2O(-1) x kg(-1), p=0.008). Resistance remained unchanged (0.22+/-0.02 versus 0.25+/-0.05 cm H2O x L(-1) x s(-1); not significant). CONCLUSIONS: There were only minor effects on pulmonary function during and after OLV in the neonatal piglet. Alterations in gas exchange during OLV were minimal. Prolonged collapse of the lung with subsequent reexpansion was associated with a slight decrease in compliance, indicating some mild lung injury.     

Vortex Dynamics in Bi2Sr2CaCu2O8 Single Crystal with Low Density Columnar Defects Studied by Magnetic Force Microscope

We have studied vortex dynamics in Bi₂Sr₂CaCu₂O₈ single crystal with low density columnar defects by using a magnetic force microscope. Single crystal Bi₂Sr₂CaCu₂O₈ sample was irradiated by 1.3 GeV uranium ion to form artificial pinning centers along the crystalline c-axis. The irradiation dose corresponded to a matching field of 20 gauss. The radius of an individual vortex is approximately 140 nm, which is close to the penetration depth of this material. Magnetic force microscope (MFM) images show that intrinsic crystalline defects such as stacking fault dislocations are very effective pinning centers for vortices in addition to the pinning centers due to ion bombardment. By counting the number of vortex, we found that the flux trapped at each pinning center is a single flux quantum. At higher magnetic field, the vortex structure showed an Abrikosov lattice disturbed only by immobile vortices located at pinning centers. When increasing or decreasing the external magnetic field, the spatial distribution of vortices showed a Bean model like behavior.     

METEOR: a constraint-based FIR filter design program

It is proposed to specify a filter only in terms of upper and lower limits on the response, find the shortest filter length which allows these constraints to be met, and then find a filter of that order which is farthest from the upper and lower constraint boundaries in a minimax sense. The simplex algorithm for linear programming is used to find a best linear-phase FIR filter of minimum length, as well as to find the minimum feasible length itself. The simplex algorithm, while much slower than exchange algorithms, also allows the incorporation of more general kinds of constraints, such as concavity constraints (which can be used to achieve very flat magnitude characteristics). Examples are given to illustrate how the proposed and common approaches differ, and how the proposed approach can be used to design filters with flat passbands, filters which meet point constraints, minimum phase filters, and bandpass filters with controlled transition band behavior     

Physical wavelets and radar: a variational approach to remotesensing

Physical wavelets are acoustic or electromagnetic waves, resulting from the emission of a time signal by a localized acoustic or electromagnetic source moving along an arbitrary trajectory in space. Thus, they are localized solutions of the wave equation or Maxwell's equations. Under suitable conditions, such wavelets can be used as “basis” functions, to construct general acoustic or electromagnetic waves. This gives a local alternative to the construction of such waves in terms of (nonlocal) plane waves, via Fourier transforms. We give a brief, self-contained introduction to physical wavelets, and apply them to remote sensing. We define the ambiguity functional, generalization of the radar and sonar ambiguity functions, which applies not only to wideband signals, but also to targets and radar platforms executing arbitrary nonlinear motions