Solar light-driven reduction of crystal violet by a composite of g-C3N4, β-Ag2Se, γ-Fe2O3 and graphite

Abstract

In this work, a new g-C₃N₄-based Z-scheme with γ-Fe₂O₃ and β-Ag₂Se both n-type semiconductors, and graphite to favor electron exchange is presented. The composite material was studied by XRD, FTIR, UV-Vis, TEM, XPS, TGA, DSC and TOF-SIMS, and the ability of this photocatalytic system to act as a photo-reductant was assessed using crystal violet (CV⁺) dye. Solar light driven photo-reduction of CV⁺ in the presence of tri-sodium citrate evidenced a synergistic enhancement of the activity of the composite toward reduction, with ～20 times higher conversion rates per unit of surface area than those of g-C₃N₄. Photo-oxidation experiments under Xe lamp irradiation in the presence of H₂O₂ also showed that the AgFeCN composite featured a higher activity (～8×) than g-C₃N₄. This Z-scheme may deserve further study as a photo-reductant to obtain hydrogen or hydrogenated compounds. Moreover, the use of CV⁺ may represent a facile procedure that can aid in the selection of new photocatalysts to be used in hydrogen production.     

Parameter Uncertainty and Policy Intensity: Some Extensions and Suggestions for Further Work

The effects of parameter uncertainty on optimal policy have been a matter of interest for academics, and even for some policymakers, for a long time. Two lines of literature have developed analytical results on this matter. The first line uses static models and the second dynamic models. In this dynamic line most of the results are confined to models with a single state and a single control variable. In this paper we want to encourage the analysis of more general dynamic cases. To do so, the results in the dynamic line are extended from one-state and one-control finite horizon models to models with a pair of control variables. We then discuss some of the hurdles which must be surmounted for the results to be made more general and suggests some lines for further research. JEL classification: C61; E61     

Crosslinking reactions and swelling behavior of matrices based on N-acryloyl-TRIS(hydroxymethyl)aminomethane

Summary In this study, new hydrogels in rod shape were prepared from N-acryloyl-TRIS(hydroxymethyl)aminomethane (NAT) using ethylene glycol dimethacrylate (EGDMA) or N,N’methylenebisacrylamide (BIS) as crosslinking agent, dimethylformamide (DMF) as solvent and benzoyl peroxide (BPO) as initiator. In most cases, 2-hydroxyethyl methacrylate (HEMA), acrylamide (Aam) or acrylic acid (Aac) were used as co-monomers. The polymeric matrices obtained by free radical polymerization exhibited different properties by changing crosslinker, crosslinker concentration, co-monomer and initial NAT/co-monomer mole ratio. Besides, hydrogels from HEMA, Aam and Aac with BIS in absence of NAT were prepared under the same experimental reaction conditions in order to compare the properties of these products with those synthesized from NAT and the respective co-monomers. Some of the final products were selected to perform urea release assays, conducted through swelling-controlled release. Urea was chosen as “model” plant fertilizer agent.     

A new FMS architecture based upon networked DSP servo technology

This paper presents a critical evaluation of existing FMS architectures and the academic and industrial design and development strategies used during their formulation. The paper seeks to address the need for, and value of, existing architectures within the industrial arena. More importantly however, this paper puts forward a new two-tier distributed control architecture for FMS based upon new (real-time) networkable DSP servo control methodologies developed by one of the authors for Softronics in Australia. The ramifications of these methodologies are substantial, not only in terms of FMS control, but in the overall simplification of such systems and the development of flexible fixturing devices over the coming decade. This paper also postulates on how new FMS architectures can be developed from such technologies and details why such architectures could be more appropriate to industry needs than those that are currently in existence.     

Hepatitis B virus infection, hepatitis B vaccine, and hepatitis B immune globulin

Hepatitis B virus (HBV) infection is a major health problem in the United States; in 1995, approximately 128,000 cases occurred. Transmission of HBV occurs primarily by blood exchange (eg, by shared needles during injection drug use) and by sexual contact. Persons infected early in life are much more likely to become chronically infected than those infected during adulthood: as many as 90% of infants infected perinatally develop chronic infection and up to 25% will die of HBV-related chronic liver disease as adults. Clinical signs of acute hepatitis occur in about 50% of infected adults but in only 5% of infected preschool-aged children. In the United States, hepatitis B vaccine is currently made by recombinant DNA technology using baker's yeast. Preexposure vaccination results in protective antibody levels in almost all infants and children (> 95%) and healthy adults younger than 40 years of age (> 90%). The most common adverse event following administration of hepatitis B vaccine is pain at the injection site, which occurs in 13% to 29% of adult and 3% to 9% of children. A comprehensive hepatitis B vaccination policy is now recommended that includes (1) routine infant vaccination; (2) catch-up vaccination of 11- to 12-year-olds who were not previously vaccinated; (3) catch-up vaccination of young children at high risk for infection; (4) vaccination of adolescents and adults based on lifestyle or environmental, medical, and occupational situations that place them at risk; and (5) prevention of perinatal HBV infection.     

Synthesis and Evaluation of Blends Formed by Polymeric Crown Ethers and a Fullerene-Containing Primary Ammonium Salt in Organic Thin Films

The synthesis of a series of polymers and cyclopolymers bearing crown ethers of differing structure and affinities towards primary ammonium ions is discussed. These polymers have been tested in their efficiency to form structurally homogeneous thin films when blended with an amphiphilic C₆₀ compound containing a primary ammonium ion functional group. The X-ray reflectivity characterization of the films revealed that the polymer bearing the crown ether with the least affinity for primary ammonium ions, but having the highest degree of polymerization, is the most effective in forming structurally homogeneous thin films.     

From "macro" to "micro" manipulation: models and experiments

This paper addresses various problems related to manipulation in the micro domain, a field which is increasingly important for research and application. Grasping and manipulating parts with size ranging between a few micrometers and about 1 millimeter (defined in this paper as "micro parts") are required for an increasing number of applications: the assembly of micro systems and micro machines; and the operation in tiny and unpredictable environments, such as for inspection and interventions in pipes and for micro surgery. The aim of this work is to find out similarities and differences between traditional manipulation and micro manipulation, by investigating which requirements are still valid and which must be redefined when the object size scales down. The similarities between the two application domains "macro" and "micro" are pointed out along with the differences, and both are taken into account for the evaluation of different grasping typologies. Dedicated models for the adhesion forces arising at the micro level are presented, preliminarily tested, and discussed.