The effect of na and Sr modification on surface tension and volumetric shrinkage of A356 alloy and their influence on porosity formation

Modification of the eutectic Si in Al-Si foundry alloys by adding strontium or sodium is, unfortunately, accompanied by an increase of porosity in the casting. In an attempt to understand the nature of this problem, this study used a sessile-drop method to investigate the effect of Sr and Na on surface tension and volumetric shrinkage, two probable causes of porosity occur-rence. The addition of 0.01 wt pct Sr and 0.005 wt pct Na to A356 alloy decreases the surface tension of the liquid by about 19 and 10 pct, respectively, and may increase the volume shrink-age by about 12 pct. These changes to surface tension and volumetric shrinkage promote the early formation of the pores during solidification and give the availability of a longer period of growth prior to complete solidification, resulting in a larger pore size. The effect of surface tension on the pores is more significant than volumetric shrinkage. Although the predicted pore diameter increases with lower surface tension or higher volumetric shrinkage, these two effects alone do not seem able to completely account for the observed increase in porosity that is associated with modification.     

Design,Facile Synthesis and Characterization of Porphyrin-Zirconium-Ferrite@SiO2 Core-Shell and Catalytic Application in Cyclohexane Oxidation

Silicon - In this study, a new magnetic ZrFe2O4@SiO2-TCPP nanocatalyst with high efficiency was used for the oxidation of cyclohexane to cyclohexanone (Ke) and cyclohexanol (Al). The mesoporous...     

Position sensorless control

In this article, a generalized sensorless method for SRM drives has been explained. By continuous monitoring of the back-EMF, the best version of the sensorless technique is selected and engaged. The robust performance obtained from this technique makes it as attractive candidate for industrial as well as domestic applications. Furthermore, a four-quadrant strategy under sensorless control has been designed and implemented. The proposed method demonstrates simplicity in computation while providing high-precision position information with no extra hardware or memory. The proposed algorithms have been implemented on an experimental SRM test setup. Our findings show that four-quadrant sensorless control of the SRM drive is a feasible technique and can be considered as a technology ready for application. This technique is especially helpful where the characteristics of the application calls for operating in two/four-quadrants or when a closed-loop speed/position control with sensorless strategy is demanded.     

Preparation, Characterization and Photocatalytic Properties of Ba-Cd-Sr-Ti Doped Fe3O4 Nanohollow Spheres on Removal of Congo Red Under Visible-Light Irradiation

In this study, Ba-Cd-Sr-Ti doped Fe₃O₄ nanohollow spheres were successfully prepared via a simple solvothermal method. The crystal size, structure, morphology and elemental analysis of the as-prepared sample were investigated in detail by X-ray diffraction (XRD), FT-IR, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy, respectively. Magnetic hysteresis measurement was carried out on a vibrant sample magnetometer (VSM) showing the soft ferromagnetic property at room temperature. The synthesized nanohollow spheres were employed as a photocatalyst to study the photocatalytic degradation of dye contaminations. The UV-Vis results showed that the specimen could well catalyze the decolorizing of congo red (CR) solution and a removal efficiency of 99.5 % was obtained at pH 6. The optical characteristic of the products was studied by estimating the band-gap energy based on diffuse-reflectance spectroscopy (DRS) which represented the doped magnetite with semiconductor metals to be more prone in the visible region as compared to UV region. Some factors such as initial dye concentration, pH, and contact time influencing the decomposition of CR were evaluated.     

Fabrication and characterization of silk/forsterite composites for tissue engineering applications

In this research, novel composite scaffolds consisting of silk fibroin and forsterite powder were prepared by a freeze-drying method. In addition, the effects of forsterite powder contents on the structure of the scaffolds were investigated to provide an appropriate composite for bone tissue engineering applications. The morphology studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques showed that the forsterite ceramic was well distributed throughout the structures of SF/forsterite scaffolds. Furthermore, the forsterite powder (up to 40 wt%) was homogenously distributed within the silk fibroin as a matrix.     

Fault diagnosis of an automobile cylinder head using low frequency vibrational data

This paper proposes a vibration-based fault-diagnosis method for mechanical parts. This method, after algorithm development, only requires a single inexpensive test to inspect the part which could take as short as half a second. The algorithm is developed in three major stages, (i) exciting specimens without or with known faults using a controlled force and recording acceleration of a single point for a short time (ii) finding a signature for each faulty specimen, using Fourier transform and statistical analysis. (iii) Developing a multi-layer perceptron, as a mathematical model, using the results of stage (ii). The elements of a part signature are the inputs to the model. The location (and possibly size and shape factor) of the fault is model output. Stage (i) can be performed experimentally or alternatively with a validated FEM, one experiment or simulation per specimen. The proposed technique was examined to locate (isolate) a fault on an automobile cylinder head. The presented accuracy is considerable, and the data collected at fairly low frequency range (below 1200 Hz) were found to be sufficient for this technique. In the case study of this paper, possible fault locations are on a line; as a result, fault location has one dimension. It is shown that the technique can be extended to higher dimensions.     

CFD Simulation of Deep-Bed Paddy Drying Process and Performance

Computational Fluid Dynamics (CFD) was applied three-dimensionally to simulate the drying behavior of paddy in a deep-bed dryer. The commercial CFD software Fluent 6.3.26 was used. The deep-bed paddy drying process and performance were studied by incorporating user-defined function (UDF) in Fluent written in C language. The predicted drying parameters were compared with experimental data of deep-bed drying of paddy. The values of mean relative deviation (MRD), standard error of prediction (SEP), and maximum error of prediction (MEP) for prediction of grain moisture content, air temperature, and absolute humidity were less than 6, 10, and 9%; 0.33% (d.b), 1.24°C, and 0.06% (kg/kg of dry air); and 2.25% (d.b), 6.8°C, and 0.37% (kg/kg of dry air), respectively, which reflect reasonable accuracy. Moreover, the energetic and exergetic performance of deep-bed paddy drying were simulated and analyzed. The effects of inlet air temperature and mass flow rate on the performance parameters were investigated. It was shown that the application of higher levels of inlet air temperature and lower mass flow rates yielded higher exergy efficiencies of deep-bed paddy drying.     

A 0.2-W Heterostructure Barrier Varactor Frequency Tripler at 113 GHz

We present a high-power InAlAs/InGaAs/InP heterostructure barrier varactor (HBV) frequency tripler. The HBV device topology was designed for efficient thermal dissipation and high efficiency. To verify simulations, the device was flip-chip soldered onto embedding microstrip circuitry on an aluminum nitride substrate. This hybrid circuit was then mounted in a waveguide block without any movable tuners. From the resulting RF measurements, the maximum output power was 195 mW at 113 GHz, with a conversion efficiency of 15%. The measured 3-dB bandwidth was 1.5%