A Regioselective Approach to Synthesize Indolyl Diketone Derivatives via Magnetic Polymeric Copper-Catalyst

Catalysis Letters - In the present paper, an efficient Cu-catalyzed regioselective acylation of indoles with phenylglyoxals was developed which is the first example of indolyl diketones synthesis...     

Synthesis of water dispersible reduced graphene oxide via supramolecular complexation with modified β-cyclodextrin

A noncovalent functionalization of the edges of reduced graphene oxide (RGO) with β-cyclodextrin-graft-hyperbranched polyglycerol (β-CD-g-HPG) was successfully performed via a host-guest interaction. The results showed that β-CD-g-HPG disperses the graphene sheets better than pure β-CD or HPG. The resulted supramolecular structure is stable in neutral water medium more than one week. However, in acidic medium the host-guest interaction is collapsed and graphene nanosheets precipitate.     

Synthesis of a Series of PEG-Based ABA Triblock Copolymers and Their Influence on Rheology of Cement Slurries

A series of water-soluble ABA triblock copolymers consisting of a polyethylene glycol central block joined to two blocks of six different homopolymers have been synthesized via simple solvent-free and ecofriendly routes and characterized by FTIR and ¹HNMR spectroscopy. Dispersing and slump-retaining abilities of the copolymers in cement slurries were evaluated by mini-slump spread method. Rheological measurements of samples with the best performance were carried out using a rate-controlled coaxial cylinder viscometer. The test results indicate that the dispersing power of the copolymers in cement pastes is strongly affected by the structure and degree of polymerization of the monomers.     

Modified chitosan as a polymeric nanoreactor for fabrication of pure ZnO nano particles

ZnO nanoparticles have been prepared successfully by hydrogel decomposition method (HDM). Synthesized ZnO nanoparticles were characterized by X‐ray diffraction (XRD), fourier transforms infrared spectroscopy (FTIR), and transition electron microscopy (TEM) techniques. Narrow distribution of sizes with a 20–30 nm diameter and regular distribution of ZnO nanoparticles are attributed to the application of poly(acrylic acid‐co‐acrylamide) grafted chitosan hydrogel as coating agent. The results show that the polymer thermal decomposition technique is a perfect method for the synthesis of ZnO nanoparticles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,characterization, and swelling behavior of alginate‐g‐poly(sodium acrylate)/kaolin superabsorbent hydrogel composites

A novel superabsorbent composite based on sodium alginate and the inorganic clay kaolin was synthesized via the graft copolymerization of acrylic acid (AA) in an aqueous medium with methylene bisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The effects of reaction variables, such as the MBA, AA, and APS concentrations and the alginate/kaolin weight ratio, on the water absorbency of the composite were systematically optimized. Evidence of grafting and kaolin interactions was obtained by a comparison of the Fourier transform infrared spectra of the initial substrates with that of the superabsorbent composite, and the hydrogel structure was confirmed with scanning electron microscopy. The results indicated that with an increasing alginate/kaolin weight ratio, the swelling capacity and gel content increased. The effects of various salt media were also studied, along with the swelling kinetics. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Swelling properties of CMC‐g‐poly (AAm‐co‐AMPS) superabsorbent hydrogel

A series of biopolymer‐based superabsorbent hydrogels based on carboxymethyl cellulose has been prepared by free‐radical graft copolymerization of acrylamide and 2‐acrylamido‐2‐methylpropan sulfonic acid (AMPS) in aqueous solution using methylenebisacrylamide as a crosslinking agent and ammonium persulfate as an initiator. The effect of variables on the swelling capacity such as: acrylamide/AMPS weight ratio, reaction temperature, and concentration of the initiator and crosslinker were systematically optimized. The results indicated that with increasing the amount of AMPS, the swelling capacity is increased. FT‐IR spectroscopy and scanning electron microscope analysis were used to confirm the hydrogel structure. Swelling measurements of the synthesized hydrogels in different salt solutions indicated considerable swelling capacity. The absorbency under load of the superabsorbent hydrogels was determined by using an absorbency under load tester at various applied pressures. A preliminary swelling and deswelling behaviors of the hydrogels were also studied. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Facile synthesis of extremely biocompatible double‐network hydrogels based on chitosan and poly(vinyl alcohol) with enhanced mechanical properties

An easy and ecofriendly method for designing double‐network (DN) hydrogels based on chitosan and poly(vinyl alcohol) (PVA) with high mechanical performance is described. When covalent bonds in the networks are used as crosslinking agents in the achievement of a higher mechanical strength, the irreversible deformation of these hydrogels after a large force is applied is still one of the most important obstacles. To overcome this problem, we used physical crosslinking for both networks. The mechanical strength, surface morphology, and cytotoxicity of the films were studied by tensile testing, scanning electron microscopy analysis, and an MTT assay. The synthesized chitosan–PVA DN hydrogels showed a large improvement in the tensile strength to 11.52 MPa with an elongation of 265.6%. The surface morphologies of the films demonstrated the effective interactions between the two networks and a suitable porosity. Also, because of the use of a natural polymer and honey as a plasticizer, the cell culture indicated that the synthesized DN hydrogels had good biocompatibility (with 327.49 ± 11.22% viability) and could be used as capable biomaterials. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45752.     

Synthesis of new electromagnetic nanocomposite based on modified Fe3O4 nanoparticles with enhanced magnetic,conductive, and catalytic properties

A new method for the fabrication of an electromagnetic nanocomposite based on Fe₃O₄ and polyaniline (PANI) is offered. The authors focused on improvement of the physical and electromagnetic properties of the nanocomposite using a new synthetic method. Supermagnetic Fe₃O₄ nanoparticles were synthesized through coprecipitation method. As a chemical modification, the third generation of poly (amidoamine) dendrimer was grafted on the surface of the nanoparticles. PANI was grafted from –NH₂ functional groups of dendrimer via in situ polymerization of aniline. Finally, Au nanoparticles were loaded on the nanocomposite and its catalytic activity for reduction reactions was studied.     

Synthesis and characterization of poly(methacrylates) containing spiroacetal and norbornene moieties in side chain

A four‐step synthetic strategy was applied to achieve novel methacrylic monomers. 5‐Norbornene‐2,2‐dimethanol was prepared from a Diels–Alder reaction of cyclopentadiene and acrolein, followed by the treatment of the adduct with an HCHO/KOH/MeOH solution. The resulting 1,3‐diol (1) was then acetalized with different aromatic aldehydes having OH groups on the ring to produce four spiroacetal derivatives. The reaction of methacryloyl chloride with the phenolic derivatives led to four new methacrylic monomers that were identified spectrochemically (mass, FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy). Free radical solution polymerization was used to prepare novel spiroacetal–norbornene containing polymethacrylates, which were characterized by FTIR and ¹H‐NMR spectroscopy and differential scanning calorimetry and thermogravimetric thermal analysis. Gel permeation chromatography was performed to determine molecular weight averages and polydispersity. The polymethacrylate having naphthalenic nuclei was recognized to be the highest molecular weight polymer (M̄_n = 12144, η_inh = 0.80 dL/g) with the highest thermal stability. All the polymers showed good solubility in a variety of common organic solvents. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 30–38, 2000