Effect of Adding Transition Metals to Copper on the Dehydrogenation Reaction of Ethanol

The present work aims to investigate the effect adding Ag, Co, Ni, Cd and Pt to copper on ethanol dehydrogenation. The catalysts synthesized by deposition–precipitation method were characterized using various physicochemical methods such as N₂ adsorption–desorption, TPR, SEM–EDX, XRD, XPS and TGA–DSC-MS. Catalytic evaluation results revealed that the predominant product of the reaction was acetaldehyde. Monometallic copper or mixed with Cd, Ag or Co show good catalytic performances. Adding nickel to copper improves the process conversion but reduces acetaldehyde selectivity, giving rise to methane in produced hydrogen. Pt-Cu/SiO₂ catalyst guides the reaction towards diethyl ether. Time on stream tests performed during 12 h at 260 °C, showed that adding Cd to Cu enhances its stability by over 30% of conversion, this is explained by the reduction of copper crystallites sintering, which makes Cd-Cu/SiO₂ a promising catalyst for the production of acetaldehyde by ethanol dehydrogenation.

Graphic Abstract

     

Open-cell polyvinylidene fluoride foams as carriers to promote biofilm growth for biological wastewater treatment

This article reports the design and fabrication of open-cell polyvinylidene fluoride (PVDF) foams as carriers that can promote biofilm growth and organic removal efficiency for biological wastewater treatment in attached growth bioreactors. Open-cell PVDF foams were fabricated by a manufacturing approach that integrated compression molding and particulate leaching. PVDF carriers were structured with two governing factors of leaching agent types (e.g., sodium chloride [NaCl] and sodium acetate [NaOAc]) and contents (e.g., 80 and 90 wt%). Open-cell PVDF foams possessed high porosity and high protected surface area (i.e., more than ×10 to ×20 of the areas of commercialized carriers), which promoted biofilm growth in these carriers. As a successful advantage, PVDF carriers used in the moving bed biofilm reactors (MBBR) were entirely covered by biofilm in both interior and exterior parts without clogging. This provides strong evidence of the bacterial compatibility of the fabricated open-cell PVDF foam carriers. Moreover, the specific morphology of the PVDF carriers in this article provided superior biofilm protection from the detachment in MBBR. Experimental results revealed that PVDF open-cell foams fabricated by 80 wt% of NaCl demonstrated higher mechanical strength with an organic removal efficiency of 77% ± 7% in the corresponding bioreactor containing them.     

Grafting polymers to titania nanoparticles by radical polymerization initiated by diazonium salt

The grafting of biocompatible poly(hydroxyethyl) methacrylate (PHEMA) by a very simple method onto titanium dioxide nanoparticles is reported. The selected grafting process is based on the chemical reduction of diazonium salts by reducing agents in presence of the vinylic monomer. As previously demonstrated on flat surfaces, it leads to strongly grafted and stable polymer films and has many advantages residing in a short one-step reaction occurring at atmospheric pressure, ambient air and room temperature in water. TiO₂ nanoparticles were synthesized by laser pyrolysis, giving nanoparticles with controlled size and composition. The coating, the composition, the chemical structure, and the grafted PHEMA quantities of the resulting products were investigated by Transmission electron microscopy, Infrared-attenuated total reflection, X-ray photoelectron spectroscopy, and Thermogravimetric analysis. It was demonstrated that the PHEMA shell was successfully chemically grafted onto the surface of the TiO₂ core without any significant influence on the morphology of the nanoparticles.     

PEG‐Citrate dendrimer second generation: is this a good carrier for imaging agents In Vitro and In Vivo ?

While cancer is the leading cause of human''s deaths worldwide, finding an imaging agent which can detect cancer tumours is needed for cancer diagnosis. In the present study, PEG‐citrate dendrimer‐G₂ was used as a nano‐carrier of FITC dye and Iohexol to help passive targeting and uptake of both imaging agents in cancer cells/tumour in vitro and in vivo. Dendrimer was synthesisedand the product characterised using LC‐MS, FT‐IR, DLS, ELS, AFM, and ¹ HNMR. After FITC loading into dendrimer, MTT was performed to determine the cytotoxicity of formulation on HEK‐293 and MCF‐7 cells. In vitro imaging using dendrimer‐FITC was done via fluorescent microscope thereafter. Moreover, CT imaging using Iohexol was employed to show the targeting nature and ability of the complex to use as imaging agent in vivo. Data yielded in this study corroborate the notion that the promised dendrimer was synthesised properly and had no toxicity along with FITC on normal cell. Furthermore, CT and fluorescent images showed the targeting nature and imaging ability of Iohexol/FITC loaded dendrimer in vitro and in vivo. Overall, results showed promising characteristics of the novel complexes using dendrimer‐G₂ both in vitro and in vivo.Inspec keywords: drug delivery systems, cellular biophysics, molecular biophysics, fluorescence, cancer, tumours, drugs, nanomedicine, biomedical materials, dyes, toxicologyOther keywords: imaging agent, cancer tumours, cancer diagnosis, PEG‐citrate dendrimer‐G, FITC dye, cancer cells, FITC loading, vitro imaging, dendrimer‐FITC, CT imaging, targeting nature, promised dendrimer, fluorescent images, imaging ability, Iohexol/FITC     

Aesculus hippocastanum L. as a Stabilizer in Hemp Seed Oil Nanoemulsions for Potential Biomedical and Food Applications

Nanoemulsion systems receive a significant amount of interest nowadays due to their promising potential in biomedicine and food technology. Using a two-step process, we produced a series of nanoemulsion systems with different concentrations of hemp seed oil (HSO) stabilized with Aesculus hippocastanum L. extract (AHE). Water and commercially-available low-concentrated hyaluronic acid (HA) were used as the liquid phase. Stability tests, including an emulsifying index (EI), and droplet size distribution tests performed by dynamic light scattering (DLS) proved the beneficial impact of AHE on the emulsion’s stability. After 7 days of storage, the EI for the water-based system was found to be around 100%, unlike the HA systems. The highest stability was achieved by an emulsion containing 5% HSO and 2 g/L AHE in water, as well as the HA solution. In order to obtain the detailed characteristics of the emulsions, UV-Vis and FTIR spectra were recorded, and the viscosity of the samples was determined. Finally, a visible microscopic analysis was used for the homogeneity evaluation of the samples, and was compared with the DLS results of the water system emulsion, which showed a desirable stability. The presented results demonstrate the possible use of oil emulsions based on a plant extract rich in saponins, such as AHE. Furthermore, it was found that the anti-inflammatory properties of AHE provide opportunities for the development of new emulsion formulations with health benefits.     

APS-silane modification of silica nanoparticles: effect of treatment’s variables on the grafting content and colloidal stability of the nanoparticles

Silica nanoparticles, Aerosil 200, with an average primary particle size of 12 nm were chemically modified by γ-aminopropyltriethoxy silane (APS) via a two-step sol–gel process. Effects of the treatment variables including reaction temperature, water content, and silane concentration on the colloidal stability and the amount of APS grafting on the surface of nanoparticles were studied using thermal gravimetric analysis, diffuse reflectance infrared spectroscopy, and by monitoring the sedimentation behavior of the dispersion of nanoparticles in distilled water as a polar media. Furthermore, the effect of surface modification on the dispersibility of silica nanoparticles in an epoxy novolac coating was evaluated by means of scanning electron microscopy. The results showed chemical interactions between APS and SiO₂ nanoparticles. Also, parameters including treatment at ambient temperature, low level of water, and moderate concentration of silane compound, have a considerable effect on the APS grafting content due to the increase of silane hydrolysis and higher silylation coverage of the nanoparticles.     

Dietary polyphenols for atherosclerosis: A comprehensive review and future perspectives

Atherosclerosis is one of the most prevalent reasons for premature death in adults. Despite the several conventional drugs in the market; many patients are not completely treated. Here we comprehensively review current clinical evidence regarding the efficacy of dietary polyphenols in atherosclerosis and related complications. PubMed, Cochrane library and Scopus were searched from inception until August 2016 to obtain clinical trials in which polyphenols were evaluated in cardiovascular parameters related to atherosclerosis. From total of 13031 results, 49 clinical trials were finally included. Tyrosol derivatives from virgin olive oil, catechins and theaflavins from green and black tea, cocoa polyphenols, and red grape resveratrol, as well as anthocyanins were the most studied polyphenolic compounds which could regulate lipid profile, inflammation and oxidative stress, blood pressure, endothelial function, and cell adhesion molecules. The most important limitations of the included trials were small sample size, short follow up, and unqualified methodology. Future well-designed clinical trials are necessary to provide better level of evidence for clinical decision making.     

The effects of supplementation with conjugated linoleic acid on anthropometric indices and body composition in overweight and obese subjects: A systematic review and meta-analysis

Abstract

Clinical trials have indicated conflicting results on the effects of conjugated linoleic acid (CLA) on obesity. The present study aimed to systematically review controlled clinical trials examining the effects of CLA on anthropometric indices and body composition in overweight and obese subjects. Pubmed, Scopus, Web of science, and Cochrane databases were searched between 2000 and December 2017 with no language restriction. Placebo-controlled clinical trials that reported anthropometric indices and body composition in overweight and obese subjects were included. Random-effect model was used to pool the effect estimates. Of 4032 publications, 13 trials were included for the meta-analysis. Pooled effect sizes indicated that CLA significantly reduced body weight (WMD: ?0.52 kg, 95% CI: ?0.83, ?0.21; I²: 48.0%, p?=?0.01), BMI (WMD: ?0.23 kg/m², 95% CI: ?0.39,???0.06; I²: 64.7%, p?=?0.0001), FM (WMD: ?0.61 kg, 95% CI: ?0.98, ?0.24; I²: 53.8%, p?=?0.01) and increased LBM (WMD: 0.19 kg, 95% CI: 0.04, 0.34; I²: 81.4%, p?=?0.0001) compared to the placebo group. However, the effects of CLA on WC (WMD: 0.05 cm, 95% CI: ?0.01, 0.1; I²: 0%, p?=?0.93) was not significant. Additionally, its impact on body weight in subjects older than 44 year (WMD: ?1.05 kg, 95% CI: ?1.75, ?0.35; I²: 57.0%, p?=?0.01), with longer duration (more than 12 weeks) (WMD: ?1.29 kg, 95% CI: ?2.29, ?0.29; I²: 70.3%, p?=?0.003) and dosage more than 3.4 g/day (WMD: ?0.77 kg, 95% CI: ?1.28, ?0.25; I²: 62.7%, p?=?0.004) were greater than comparative groups. Supplementation with CLA can slightly reduce body weight and FM and increase LBM in overweight and obese subjects. However, its efficacy was not clinically considerable. Further studies with high methodological quality are needed to shed light on the effects of CLA on anthropometric indices in overweight and obese subjects.