Lower Irritation Potential of Laureth‐3 Carboxylate Amino Acid Salt

Sodium laureth sulfate and amino acid type surfactants have been categorized as low‐skin irritation chemicals based on results of previous skin irritation tests. However, detergent‐induced skin irritation still occurs. Detergents with a low‐skin irritation effect are required, since the number of cosmetics for sensitive skin has increased. Therefore, an in vitro method of testing the safety of cosmetics for sensitive skin is required. Skin irritation by anionic surfactants was investigated to determine the effect of laureth‐3 carboxylate (polyoxyethylene lauryl carboxymethyl ether) amino acid salt on skin irritation. In addition, sodium laureth sulfate and amino acid type surfactants, regarded as low‐irritation surfactants, were also tested for skin irritation. The skin irritation effect of laureth‐3 carboxylate lysine salt (Surfactant 1 ), sodium laureth sulfate (Surfactant 2 ), and sodium N‐lauroyl glutamate (Surfactant 3 ) were investigated using a reconstructed human cultured epidermal model, LabCyte EPI‐MODEL24 6D. Cell viabilities of cultured epidermal cells exposed to Surfactant 1 (5.0 % aq.), Surfactant 2 , and Surfactant 3 were 82.0, 45.0 and 19.1 %, respectively. There were significant differences in cell viability upon exposure to 5.0 % aqueous test solutions of the three test chemicals. The results of the current investigation indicate that Surfactant 1 has a low skin‐irritation effect.     

Inhibitory effects of flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu) on antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells

We found that two distinct flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu), isoquercitrin (Isq) and hyperin (Hyp), are capable of inhibiting antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells. In order to elucidate the underlying mechanisms, we examined effects of Isq and Hyp on cellular responses induced by antigen stimulation. Treatment with both Isq and Hyp markedly inhibited antigen-stimulated elevation of intracellular free Ca²⁺ concentration and reactive oxygen species (ROS). Isq and Hyp did not affect NADPH oxidase (NOX) activity, but they possessed DPPH radical-scavenging activity similar to that of epigallocatechin gallate, a potent anti-oxidant, Finally, Isq and Hyp showed little or no effects on Ag-stimulated Syk activation or phosphorylation of signalling molecules. These results indicate that inhibition of antigen-stimulated degranulation by Isq and Hyp is mainly due to suppression of intracellular Ca²⁺ elevation, which is caused by direct scavenging of ROS that are generated by NOX. Our findings suggest that Isq and Hyp, isolated from the peel of persimmon, would be beneficial for alleviating symptoms of type I allergy.     

First-principles calculations of phase equilibria and transformation dynamics of Fe-based alloys

Theoretical procedures of first-principles calculations of phase stability and phase equilibria are summarized. The present scheme is shown to be able to reproduce the transition temperatures with surprisingly high accuracy for Fe−Pd and Fe−Pt systems. The main emphasis of the present report is placed on the extension of the first-principles calculation to transition dynamics calculations. This is performed by combining the cluster variation method with the phase-field method via a coarse graining operation. The time evolution process of antiphase boundaries associated with L1₀ ordering for Fe−Pd system is demonstrated. This paper was presented at the International Symposium on User Aspects of Phase Diagrams, Materials Solutions Conference and Exposition, Columbus, Ohio, 18–20 October, 2004.     

Transition of solidification mode and the as-cast γ grain structure in hyperperitectic carbon steels

Formation processes of as-cast γ grain structures during casting of hyperperitectic carbon steels with 0.15–0.45 mass% carbon concentrations have been studied by means of a rapid unidirectional solidification technique. In steels with 0.15–0.41 mass% carbon concentrations, coarse columnar γ grains (CCGs) with a minor axis diameter of 1–3 mm developed along the direction of temperature gradient. In a steel with 0.38 mass% carbon, importantly, columnar γ grains (CGs) whose minor axis diameter is less than 500 μm form before the formation of CCGs and the grain structure changes discontinuously from CG to CCG. The fraction of the CG region increases with an increase in the carbon concentration. In the samples with a carbon concentration higher than 0.43 mass%, the as-cast structure consists of CGs over almost the entire ingots. Analyses of the relation between γ grain and dendrite structures and their crystallographic orientations indicate that the formation of CGs originates from the primary solidification of γ phase instead of δ phase. This is supported by numerical analysis of the dendrite growths.     

Diffusion-controlled peritectic reaction process in carbon steel analyzed by quantitative phase-field simulation

The peritectic reaction process in carbon steel, L + δ → γ, has been analyzed by a quantitative phase-field simulation. The calculated moving velocities of the γ–L and γ–δ planar interfaces in the isothermal peritectic transformation precisely agree with the corresponding experimental data, which strongly supports the accuracy of the present simulation. The diffusion-controlled peritectic reaction rate and the growth velocity of the γ phase along the δ–L interface obtained by the present simulation were fairly consistent with the experimentally measured values. This indicates that recent experimental findings can be explained by a diffusion-controlled mechanism. This is in marked contrast to the claims made on the basis of the experimental data and an analytical model that the peritectic reaction is not controlled by the diffusion of carbon.     

Quantitative phase-field modeling for two-phase solidification process involving diffusion in the solid

A quantitative phase-field model for two-phase solidification processes is developed based on the anti-trapping current approach with the free energy functional formulated to suppress the formation of an extra phase at the interface. This model appropriately recovers the free boundary problem for the motion of interface in the thin-interface limit and, importantly, it is applicable to the solidification process in binary alloy systems with arbitrary values of the solid diffusivities and interfacial energies. The performance of the present model is investigated for the peritectic reaction process in carbon steel. The present model exhibits excellent convergence behavior with respect to the interface thickness.     

A critical condition for the formation of a coarse columnar γ grain structure in a peritectic solidified carbon steel

The formation of a coarse columnar austenite grain (CCG) structure is a serious problem in continuous casting processes of peritectic solidified carbon steels. In this study, a guiding principle for the avoidance of CCG formation is developed. The critical condition for CCG formation recently put forward based on phase-field simulations, which is given by a balance between the cooling condition and the growth rate of the CCG, is first re-examined and modified by considering the effect of a liquid phase during the CCG formation. The validity of this critical condition is then investigated by three different casting experiments combined with heat conduction analyses. From a comparison between the cooling conditions and the resulting microstructural changes, the validity of the critical condition is successfully demonstrated.     

Invited Paper: Depth reproducibility of multiview depth‐fused 3‐D display

Abstract— A multi‐view depth‐fused 3‐D (DFD) display that provides smooth motion parallax for wide viewing angles is proposed. A conventional DFD display consists of a stack of two transparent emitting screens. It can produce motion parallax for small changes in observation angle, but its viewing zone is rather narrow due to the split images it provides in inclined views. On the other hand, even though multi‐view 3‐D displays have a wide viewing angle, motion parallax in them is discrete, depending on the number of views they show. By applying a stacked structure to multi‐view 3‐D displays, a wide‐viewing‐angle 3‐D display with smooth motion parallax was fabricated. Experimental results confirmed the viewing‐zone connection of DFD displays while the calculated results show the feasibility of stacked multi‐view displays.