Al2O3 Colloidal Nanocrystals with Strong UV Emission

A facile sol–gel procedure has been developed for the synthesis of colloidal alumina nanocrystals. For the first time, optical characterization procedures were employed to study the quantum confinement effects in optical properties of the prepared Al₂O₃ sol. Accordingly, the hyperbolic band model was used to determine the optical band gap of colloidal alumina nanocrystals. X‐Ray diffraction pattern was used to study the crystallographic phase of the dried gel. Morphological characterization was performed using scanning electron microscopy (SEM). Inductively Coupled Plasma (ICP) emission spectroscopy was used to determination purity of the Al₂O₃ powder. High‐resolution TEM showed that the diameter of colloidal nanocrystals is about 10 nm. Photoluminescence spectroscopy demonstrated that quantum yields for colloidal nanocrystals are 68% with 300 nm excitation wavelength. The experimental observations confirm that highly stable alumina sol with strong UV emission was synthesized. The mentioned optical properties have not been reported before.     

Evaporation and Evolution of Suspended Solution Droplets at Atmospheric and Reduced Pressures

Thermal history and solute precipitation behavior of suspended solution droplets of sodium chloride (NaCl), magnesium sulphate (MgSO₄), and zirconium hydroxychloride (ZrO(OH)Cl) evaporating at atmospheric and reduced pressures are studied. Experimental measurements on the variation of droplet diameter, solution concentration, and temperature during the evaporation period are presented and discussed. The results of solute precipitation behavior in solution droplets observed under an optical microscope are displayed and discussed. Results indicate that reducing the pressure (∼ 33 kPa) results in a change in the solution droplet evaporation rate, but the thermal histories of a particular solution droplet are similar at the atmospheric and reduced pressures. At atmospheric and reduced pressures used in this study, the d² law for solution droplets is valid at early stages of the evaporation and before the solute precipitation initiates. Drying of MgSO₄ and ZrO(OH)Cl solution droplets results in the formation of spherical particles, whereas drying of spherical NaCl solution droplets results in the formation of cubic particles.     

A novel open-loop high-speed CMOS sample-and-hold

A new open-loop high-speed CMOS sample-and-hold is presented. Based on new method for further reduction of voltage-dependent charge injection, a new CMOS sample-and-hold was designed. Simulation results confirm the effectiveness of this method. Over 10 dB improvement in signal-to-noise ratio, compared to the signal-to-noise ratio of conventional bottom plate sampling S/Hs was achieved with this method. A comparison between newly designed S/H and the bottom-plate sampling S/H is presented.     

Effect of Reactor Ambient Pressure on the Morphology of Spray Dried Magnesium Sulphate Powders

The effect of reducing the reactor air pressure on the morphology of spray dried magnesium sulphate powders is investigated, experimentally. A reactor, capable of drying and pyrolyzing solution sprays at low pressures, is designed and manufactured. A vibrating mesh nebulizer is employed to generate the spray. Four different pressures, starting from 60 Torr to the atmospheric pressure, and two different reactor air temperatures of 130°C and 420°C, are considered. In addition, two different concentrations of magnesium sulphate solutions are tested. The results are explained based on the effect of reactor air pressure on the droplet evaporation rate.     

Capacitor coupled converter (C3) for high power DCconversion

The bang-bang controlled capacitor coupled converter (C³) is described in this paper. Due to the converter's inherent commutating property, the C³ can accommodate thyristors as well as high-power gate turn-off switches, due to zero-current switching transitions. The zero-current switching is achieved at no current stress increase, therefore, the topology is considered appropriate for high-power processing. DC and small signal AC models are derived for the bang-bang controlled C³, a design procedure is proposed, and simulation results are discussed. Finally, oscillograms from a proof of principle prototype circuit are presented     

Commutation of SR motors

Commutation schemes for most common types of switched reluctance (SR) motors are presented. Commutation can be achieved using two- or three-positions sensors and a simple commutation logic in a similar fashion to brushless electronically commutated motors. The commutation logic can be easily housed on a programmable logic array (PLA) or similar device. Two-quadrant operation, usually with two position sensors with variable phase shift and dwell angles, can be tuned up to achieve optimum efficiency at low cost. Four-quadrant operation with multimode commutation schemes, such as normal, boost, longdwell, and brake, which cover most of the SR drive applications, can be easily implemented with simple logic control and feedback from low-resolution position sensors. The speed range can be increased beyond the limit reachable with pulse-width modulation (PWM). A 100% increase in the speed range can be easily obtained by switching modes     

Query processing optimization in broadcasting XML data in mobile communications

Todays, XML as a de facto standard is used to broadcast data over mobile wireless networks. In these networks, mobile clients send their XML queries over a wireless broadcast channel and recieve their desired XML data from the channel. However, downloading the whole XML data by a mobile device is a challenge since the mobile devices used by clients are small battery powered devices with limited resources. To meet this challenge, the XML data should be indexed in such a way that the desired XML data can be found easily and only such data can be downloaded instead of the whole XML data by the mobile clients. Several indexing methods are proposed to selectively access the XML data over an XML stream. However, the existing indexing methods cause an increase in the size of XML stream by including some extra information over the XML stream. In this paper, a new XML stream structure is proposed to disseminate the XML data over a broadcast channel by grouping and summarizing the structural information of XML nodes. By summarizing such information, the size of XML stream can be reduced and therefore, the latency of retrieving the desired XML data over a wirless broadcast channel can be reduced. The proposed XML stream structure also contains indexes in order to skip from the irrelevant parts over the XML stream. It therefore can reduce the energy consumption of mobile devices in downloading the results of XML queries. In addition, our proposed XML stream structure can process different types of XML queries and experimental results showed that it improves the performace of XML query processing over the XML data stream compared to the existing research works in terms of access and tuning times.

     

Opposition-based learning in the shuffled differential evolution algorithm

This paper proposes using the opposition-based learning (OBL) strategy in the shuffled differential evolution (SDE). In the SDE, population is divided into several memeplexes and each memeplex is improved by the differential evolution (DE) algorithm. The OBL by comparing the fitness of an individual to its opposite and retaining the fitter one in the population accelerates search process. The objective of this paper is to introduce new versions of the DE which, on one hand, use the partitioning and shuffling concepts of SDE to compensate for the limited amount of search moves of the original DE and, on the other hand, employ the OBL to accelerate the DE without making premature convergence. Four versions of DE algorithm are proposed based on the OBL and SDE strategies. All algorithms similarly use the opposition-based population initialization to achieve fitter initial individuals and their difference is in applying opposition-based generation jumping. Experiments on 25 benchmark functions designed for the special session on real-parameter optimization of CEC2005 and non-parametric analysis of obtained results demonstrate that the performances of the proposed algorithms are better than the SDE. The fourth version of proposed algorithm has a significant difference compared to the SDE in terms of all considered aspects. The emphasis of comparison results is to obtain some successful performances on unsolved functions for the first time, which so far have not been reported any successful runs on them. In a later part of the comparative experiments, performance comparisons of the proposed algorithm with some modern DE algorithms reported in the literature confirm a significantly better performance of our proposed algorithm, especially on high-dimensional functions.     

A critical review of the most popular types of neuro control

In this review article, the most popular types of neural network control systems are briefly introduced and their main features are reviewed. Neuro control systems are defined as control systems in which at least one artificial neural network (ANN) is directly involved in generating the control command. Initially, neural networks were mostly used to model system dynamics inversely to produce a control command which pushes the system towards a desired or reference value of the output (1989). At the next stage, neural networks were trained to track a reference model, and ANN model reference control appeared (1990). In that method, ANNs were used to extend the application of adaptive reference model control, which was a well‐known control technique. This attitude towards the extension of the application of well‐known control methods using ANNs was followed by the development of ANN model‐predictive (1991), ANN sliding mode (1994) and ANN feedback linearization (1995) techniques. As the first category of neuro controllers, inverse dynamics ANN controllers were frequently used to form a control system together with other controllers, but this attitude faded as other types of ANN control systems were developed. However, recently, this approach has been revived. In the last decade, control system designers started to use ANNs to compensate/cancel undesired or uncertain parts of systems' dynamics to facilitate the use of well‐known conventional control systems. The resultant control system usually includes two or three controllers. In this paper, applications of different ANN control systems are also addressed. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society