Modifying of Cotton Fabric Surface with Nano-ZnO Multilayer Films by Layer-by-Layer Deposition Method

ZnO nanoparticle–based multilayer nanocomposite films were fabricated on cationized woven cotton fabrics via layer-by-layer molecular self-assembly technique. For cationic surface charge, cotton fabrics were pretreated with 2,3-epoxypropyltrimethylammonium chloride (EP3MAC) by pad-batch method. XPS and SEM were used to examine the deposited nano-ZnO multilayer films on the cotton fabrics. The nano-ZnO films deposited on cotton fabrics exhibited excellent antimicrobial activity against Staphylococcus aureus bacteria. The results also showed that the coated fabrics with nano-ZnO multilayer films enhanced the protection of cotton fabrics from UV radiation. Physical tests (tensile strength of weft and warp yarns, air permeability and whiteness values) were performed on the fabrics before and after the treatment with ZnO nanoparticles to evaluate the effect of layer-by-layer (LbL) process on cotton fabrics properties.     

Sensitivity of four foodborne moulds to essential oils from turkish spices,herbs and citrus peel

The antifungal effects of 22 essential oils from Turkish spices, herbs and citrus peel on four foodborne moulds were evaluated for fungistatic and fungicidal activity. The most active oils were wild thyme (Thymus rariflorus L) and thyme (Thymus serpyllum L). Parsley (Penloselinum sativum Hoffin) and savory (Satureja hortensis L) oils were found to be the least active oils. Rhizopus sp displayed the greatest tolerance, and the most sensitive mould was Penicillium chrysogenum. Prolonged incubations reduced the fungistatic and fungicidal effects of oils. It was concluded that some oils may be useful as mould inhibitors at food additive levels.     

The microencapsulation of terbinafine via in situ polymerization of melamine‐formaldehyde and their application to cotton fabric

In this study an antifungal pharmaceutical agent, terbinafine, was microencapsulated by using in situ polymerization. The polymerization was carried out at four mole ratio level and preparations were applied to the 100% cotton fabric. X‐ray diffractometry, DSC, FTIR, BET, contact angle measurements, particle size distribution and imaging techniques were performed. Best results were obtained in the case of 8 : 1 mole ratio. Strength of microcapsule applied fabrics to washing and fungus were also determined. After 25 washing cycle, microcapsules were still in the fabric and had antifungal properties against A. niger. Antifungal strength against T. rubrum was observed up to 15 washing cycles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Production of aflatoxins in sausage,salami, sucuk and kavurma

Forty nine meat product samples were examined for the fungal genera. Penicillium sp. was detected in 74.8% of samples. No sample contained Aspergillus parasiticus or Aspergillus flavus. Production of aflatoxins in sausage, salami, sucuk and kavurma by A. parasiticus and A. flavus was studied at different temperatures. A. parasiticus and A. flavus produced no aflatoxins on meat products samples at 15°C. Sucuk was a poor substrate for A. parasiticus and A. flavus at 25°C. Sausage, salami and kavurma were favorable substrates for aflatoxin production by A. parasiticus at 25°C.     

Reflex sympathetic dystrophy syndrome due to arteriovenous fistula

A patient with end-stage renal disease presented with reflex sympathetic dystrophy syndrome (RSDS) on her left hand 1 month after arteriovenous fistula (AVF) surgery. Magnetic resonance angiography revealed steal syndrome at the AVF level. Bone scintigraphy revealed early-stage RSDS. We considered that arterial insufficiency because of steal phenomenon following AVF surgery and underlying occlusive arterial disease triggered RSDS development.     

Comparison of the ozonation and Fenton process performances for the treatment of antibiotic containing manure

An integrated treatment method based on magnesium salt extraction followed by chemical oxidation was used for the treatment of a veterinary antibiotic, oxytetracycline (OTC) contaminated cow manure since animal manure can be an important source for antibiotic pollution in the environment. Pretreatment with magnesium salt enhanced the efficiencies of subsequent oxidation processes by extracting 63.9% of OTC from the manure thereby making it more favorable for oxidation with the hydroxyl radicals produced by the Fenton and ozone oxidation processes. Both the 24 h Fenton oxidation process with 434 mM H₂O₂ and 43.4 mM Fe²⁺ doses and the 1-h ozonation process with an applied ozone dose of 2.5 mg min^− 1 provided more than 90% OTC removal from the manure slurry. However, the second-order OTC removal rate constant of Fenton process (119 M^− 1s^− 1) was remarkably lower than that obtained with the ozonation process (548 M^− 1s^− 1). The oxidant dose was a significant factor for the efficiency of the Fenton treatment but not for the ozone treatment. The efficiencies of both the Fenton and ozone oxidation processes were not affected by the pH adjustment of the manure slurry.     

The effect of liposome on dyeing mohair/wool blends

The aim of this study was to examine the use of liposome in the dyeing of wool and mohair fibres with acid dyestuffs. Soybean lecithin and cholesterol were used to form the liposome membrane utilised in the dyebath. Liposome production was performed according to the thin lipid layer method (Bangham Method) using a rotary evaporator. Two different forms of liposome were used for dyeing wool and mohair fibres. In its first form, liposome was utilised as an auxiliary agent, where it was added to a conventional dyebath at the beginning of the process. In its second form, dyes were encapsulated with liposome and then used in dyeing. The effects of these two different forms of liposome were compared with conventional dyeing. Dyeing was carried out at depths of shade of 0.5%, 1.0% and 2.0% using three different concentrations of liposome (0.33%, 0.66% and 1.33%). An analysis of K/S values, fastness to washing, and the alkali solubility of fibres was conducted. The fibre samples dyed in the presence of liposome exhibited very good fastness to light (grade 8). The wash fastness test results of the liposomal‐dyed samples were significantly better (grade 4‐5) than for those samples which were conventionally dyed. In the presence of liposome, the tensile strength of fibres was 20 gf, whereas it was 11 gf without liposomes.     

Super Compact UWB Monopole Antenna for Small IoT Devices

This article introduces a novel, ultrawideband (UWB) planar monopole antenna printed on Roger RT/5880 substrate in a compact size for small Internet of Things (IoT) applications. The total electrical dimensions of the proposed compact UWB antenna are 0.19 λ_o × 0.215 λ_o × 0.0196 λ_o with the overall physical sizes of 15 mm × 17 mm × 1.548 mm at the lower resonance frequency of 3.8 GHz. The planar monopole antenna is fed through the linearly tapered microstrip line on a partially structured ground plane to achieve optimum impedance matching for UWB operation. The proposed compact UWB antenna has an operation bandwidth of 9.53 GHz from 3.026 GHz up to 12.556 GHz at −10 dB return loss with a fractional bandwidth (FBW) of about 122%. The numerically computed and experimentally measured results agree well in between. A detailed time-domain analysis is additionally accomplished to verify the radiation efficiency of the proposed antenna design for the ultra-wideband signal propagation. The fabricated prototype of a compact UWB antenna exhibits an omnidirectional radiation pattern with the low peak measured gain required of 2.55 dBi at 10 GHz and promising radiation efficiency of 90%. The proposed compact planar antenna has technical potential to be utilized in UWB and IoT applications.     

Compact Modules for Wireless Communication Systems in the E-Band (71–76 GHz)

The millimeter-wave spectrum above 70 GHz provides a cost-effective solution to increase the wireless communications data rates by increasing the carrier wave frequencies. We report on the development of two key components of a wireless transmission system, a high-speed photodiode (HS-PD) and a Schottky Barrier Diode (SBD). Both components operate uncooled, a key issue in the development of compact modules. On the transmitter side, an improved design of the HS-PD allows it to deliver an output RF power exceeding 0 dBm (1 mW). On the receiver side, we present the design process and achieved results on the development of a compact direct envelope detection receiver based on a quasi-optical SDB module. Different resonant (meander dipole) and broadband (Log-Spiral and Log-Periodic) planar antenna solutions are designed, matching the antenna and Schottky diode impedances at high frequency. Impedance matching at baseband is also provided by means of an impedance transition to a 50 Ohm output. From this comparison, we demonstrate the excellent performance of the broadband antennas over the entire E-band by setting up a short-range wireless link transmitting a 1 Gbps data signal.