Reduction of Escherichia coli O157:H7 viability on leafy green vegetables by treatment with a bacteriophage mixture and trans-cinnamaldehyde

Enterohemorrhagic Escherichia coli (EHEC) O157:H7 has been recognized as a major foodborne pathogen responsible for frequent gastroenteritis outbreaks. Phages and essential oils can be used as a natural antimicrobial method to reduce bacterial pathogens from the food supply. The objective of this study was to determine the effect of a bacteriophage cocktail, BEC8, alone and in combination with the essential oil trans-cinnameldehyde (TC) on the viability of a mixture of EHEC O157:H7 strains applied on whole baby romaine lettuce and baby spinach leaves. The EHEC O157:H7 strains used were Nal^R mutants of EK27, ATCC 43895, and 472. Exponentially growing cells from tryptic soy (TS) broth cultures were spot inoculated on leaves and dried. EHEC cells were placed at low, medium, and high inoculum levels (10⁴, 10⁵, and 10⁶ CFU/mL, respectively). Appropriate controls, BEC8 (approx. 10⁶ PFU/leaf), and TC (0.5% v/v) were applied on treated leaves. The leaves were incubated at 4, 8, 23, and 37 °C in Petri dishes with moistened filter papers. EHEC survival was determined using standard plate count on nalidixic acid (50 μg/mL) Sorbitol MacConkey agar. No survivors were detected when both leaves were treated with BEC8 or TC individually at low inoculum levels after 24 h at 23 and 37 °C. When the EHEC inoculum size increased and/or incubation temperature decreased, the efficacy of BEC8 and TC decreased. However, when the two treatments were combined, no survivors were detected after 10 min at all temperatures and inoculum levels on both leafy greens. These results indicated that the BEC8/TC combination was highly effective against EHEC on both leafy greens. This combination could potentially be used as an antimicrobial to inactivate EHEC O157:H7 and reduce their incidence in the food chain.     

Biocompatible glass ceramics

Glass ceramic biomaterials in the Mg₃[PO₄]₂ - Ca₅[PO₄]₃F system are synthesized. The physicotechnical properties, phase composition, and microstructure of glass ceramics are investigated. The obtained glass ceramic biomaterials can be used for medical purposes.     

Performance evaluation of silty sand reinforced with fibres

Triaxial compression tests were conducted to evaluate the response of randomly distributed fibre on the strength of reinforced silty sand. In this study, oil palm empty fruit bunch (OPEFB) fibre was mixed with silty sand soil to investigate the increase of shear strength during triaxial compression. The specimens were tested under drained and undrained conditions with 0.25% and 0.5% content of OPEFB fibres of different lengths (i.e. 15 mm, 30 mm and 45 mm). In addition, OPEFB fibres coated with acrylic butadiene styrene thermoplastic were tested to determine the effect of coating on reinforcement. Inclusion of randomly distributed discrete fibres significantly improved the shear strength of silty sand. Coated OPEFB fibres increased the shear strength of silty sand much more compared to uncoated fibres. Coating fibres increases interface friction between fibre and soil particles by increasing the surface area. Reinforced silty sand containing 0.5% coated fibres of 30 mm length exhibited approximately 25% increase in friction angle and 35% in cohesion under undrained loading conditions compared to those of unreinforced silty sand. The results indicate that the shear strength parameters of the soil-fibre mixture (i.e. Φ′ and c′) can be improved significantly.     

Performance of oil palm empty fruit bunch fibres coated with acrylonitrile butadiene styrene

Natural fibres are suitable for reinforcement of soils due to their availability, low cost and environment-friendly nature. Oil palm empty fruit bunches (OPEFB), solid waste produced during refinement of oil from oil palm fruit, provide fibres which have been used as reinforcement material for soil improvements. To protect the fibres from biodegrading in reinforced soil, OPEFB fibre is coated with non-biodegradable material. The effect of coating OPEFB fibres with acrylonitrile butadiene styrene (ABS) was evaluated. Morphological characterization, mechanical and physical properties of the coated fibres exhibited improved fibre performance. The ABS treatment protected fibres from water absorption and decreased the biodegradation potential of the fibres in contact with soil. The tensile strength and elasticity moduli of the OPEFB fibres were also improved with the coating. Coating fibres increases interface friction between fibre and soil particles due to increased surface area. The results were shown that the shear strength parameters of the fibre-reinforced soils can be improved significantly.     

Reduction of Escherichia coli O157:H7 viability on hard surfaces by treatment with a bacteriophage mixture

This study determined the effect of a previously characterized phage mixture, referred as BEC8 on enterohemorrhagic Escherichia coli (EHEC) O157:H7 strains applied on materials typically used in food processing surfaces. Sterile stainless steel chips (SSC), ceramic tile chips (CTC), and high density polyethylene chips (HDPEC) were used. Cultures of EHEC O157:H7 strains EK27, ATCC 43895, and 472 were combined, spot inoculated on surfaces, and dried. Chips were inoculated with 10⁶, 10⁵, and 10⁴CFU/chip, to obtain 1, 10 and 100 multiplicity of infection (MOI) values, respectively. Controls and BEC8 (approx. 10⁶ PFU/chip) were applied on inoculated surfaces and incubated at 4, 12, 23, and 37 °C. EHEC survival was determined using standard plate count on tryptic soy agar. At 37 °C and 12 °C on SSC, no survivors were detected (detection limit 10 CFU/chip) after BEC8 treatment at MOI of 100 after 10 min and at 23 °C after 1 h on SSC. A similar result was obtained on CTC at 37 °C after 10 min, and after 1 h at 23 °C. These results indicated that the phage cocktail was effective within an hour against low levels of the EHEC mixture at above room temperature on all 3 hard surfaces.     

Analysis of deposition mechanism during ultrafiltration of glycerin-rich solutions

Clarification of glycerin-rich solution is one of the potential applications of membrane within the oleochemical industry. However, one of the barriers in successfully utilizing the use of membranes such as ultrafiltration (UF) has been due to the fouling. In this work, flux decline during ultrafiltration of the glycerin-rich solutions was studied by using commercialized polymeric polyethersulphone (PES) membrane. Influence of fatty acids as foulants model (palmitic acid, stearic acid and oleic acid), pH of feed solution (3-10) and molecular weight cut-off (5 kDa, 20 kDa and 25 kDa) were analyzed. All the experiments were performed at constant pressure (2 bar) and temperature (40 °C). The Hermia's model was used to analyze the fouling mechanism during the flux decline which involve cake layer model due to adsorption of solute as well as pore blocking model. All the different types of flux decline kinetics were found to occur during the permeation of glycerin-rich solutions. However, the contribution of resistance due to cake layer formation was small for all the conditions studied. The fouling mechanisms were found to depend on the hydrophobicity of the PES membrane itself as well as the nature of foulants used in the study.     

Low-melting glaze coatings for internal facing tiles

Translated from Steklo i Keramika, No. 5, pp. 16–17, May, 1993.     

Highly Refractory Alumina-Periclase-Carbon Ceramic Materials Based on a Spinel Binder

Refractories and Industrial Ceramics - Slag-resistant highly refractory alumina-periclase-carbon ceramic materials are synthesized on the basis of electrocorundum (Kazogneupor), Zinel’bulaksk...     

Essential oils of Alpinia conchigera Griff. and their antimicrobial activities

The essential oils from the dried leaves, pseudostems and rhizomes of Alpinia conchigera Griff. (KL 5049), collected from Jeli province of Kelantan, east coast of Peninsular Malaysia, were isolated by hydrodistillation. The collected oils were analyzed by capillary GC and GC–MS. Forty one compounds were identified, among which 13 have not been detected previously. The leaf, pseudostem and rhizome oils afforded 40, 33 and 39 constituents, respectively. The most abundant components in the leaf oil included β-bisabolene (15.3%), β-pinene (8.2%), β-sesquiphellandrene (7.6%), chavicol (7.5%) and β-elemene (6.0%), while β-bisabolene (19.9%), β-sesquiphellandrene (11.3%), β-caryophyllene (8.8%) and β-elemene (4.7%) were the main components in the pseudostem. In the rhizome, 1,8-cineole (17.9%), β-bisabolene (13.9%), β-sesquiphellandrene (6.8%) and β-elemene (4.0%) were the major components. The essential oils were also subjected to antifungal and antibacterial tests, using the minimum inhibitory concentration (MIC) method. Results revealed weak inhibitions against the microorganisms tested.