Hydrogen absorption by Pd-coated ZrNi prepared by using Barrel-Sputtering System

To improve the durability of hydrogen storage materials against surface poisoning by impurity gases, effectiveness of Pd-coating layer prepared by using a Barrel-Sputtering System was examined for ZrNi powder. The effectiveness of Pd-coating was evaluated by activation temperature, at which Pd/ZrNi poisoned by air could be activated to absorb hydrogen. Characterization of Pd-coated ZrNi (denoted as Pd/ZrNi) by scanning electron microscopy, electron probe microanalysis and X-ray diffraction showed that a uniform Pd-coating layer was formed with the barrel-sputtering system. It was found that the poisoned Pd/ZrNi sample could be activated even at 423 K to absorb hydrogen at room temperature. This exhibits remarkable contrast to bare ZrNi, which could be only activated appreciably above 1073 K. It is concluded that the Pd-coating by barrel sputtering is quite effective to avoid the effect of surface poisoning of powdery hydrogen storage materials. However, the activation at excessively high temperature resulted in the loss of high activity to absorb hydrogen. It was concluded that this phenomenon was associated with reactions between Pd and ZrNi to form PdZr and other byproducts.     

Solution structure of bromelain inhibitor IV from pineapple stem: structural similarity with Bowman-Birk trypsin/chymotrypsin inhibitor from soybean

Bromelain inhibitor VI from pineapple stem (BI-VI) is a unique double-chain inhibitor with an 11-residue light chain and a 41-residue heavy chain by disulfide bonds and inhibits the cysteine proteinase bromelain competitively. The structure of BI-VI in aqueous solution was determined using nuclear magnetic resonance spectroscopy and simulated annealing-based calculations. Its three-dimensional structure was shown to be composed of two distinct domains, each of which is formed by a three-stranded antiparallel beta-sheet. Unexpectedly, BI-VI was found to share a similar folding and disulfide bond connectivities not with cystatin superfamily inhibitors which inhibit the same cysteine proteinases but with the Bowman-Birk trypsin/chymotrypsin inhibitor from soybean (BBI-I). BBI-I is a 71-residue inhibitor which has two independent inhibitory sites toward the serine proteinases trypsin and chymotrypsin. These structural similarities with BBI-I suggest that they have evolved from a common ancestor and differentiated in function during a course of molecular evolution.     

Problem pharmaceutical patents

These days, the number of pharmaceutical patent applications which do not specify the principal active ingredient in the form of a chemical name or structure is increasing. These patents are difficult to retrieve in retrospective on-line searches using chemical structures or keywords. Furthermore, even if you could find them, the situation with regard to patentability is obscure and this causes considerable problems for the experts in charge of the patent search. If you are a searcher for a large pharmaceutical company, you might already be apprehensive of infringing such patents. We, the JFA,^* gathered these patents together and studied the differences between their patentability in Japan, the US and the EPO.     

Annealing behavior of Ar ion irradiated Bi2Sr2Can-1CunO4+2n superlattice and intergrowth films

Artificially layered Bi₂Sr₂Ca_n–1Cu_nO_4+n films were synthesized by sequential sputter deposition of BiO, SrCu_0.5O_1.5 and CaCuO₂ layers. Annealing behavior of these films which were irradiated by Ar ions was studied. Defect assisted improvement of their crystalline perfection is expected which might results in the improvement of the superconducting properties of these films. An artificial film, such as an intergrowth of 2223 and 2234 phases, and superstructure films of (2245)₁(2201)₁ and (2234)₁(2212)₁, were irradiated by Ar ions (150 keV, 2–10×10¹² ions/cm₂) and annealed at 730 °C. An improvement of superconducting transition temperatures were observed.     

Superplastic behaviour of Ti-48at.%Al two-phase titanium aluminide compacts made from mechanically alloyed powder

An HIP compact of MA-processed powder having a nominal composition of Ti-48at.% Al was produced. The compact consisted of a large amount of TiAl(λ) and a small amount of Ti₃Al (₂), in a completely ultra-fine equiaxed grain structure. This two-phase compact showed typical superplastic deformation behaviour. A maximum elongation of 550% was obtained. A strain exponent, n = 2, and grain size exponent, p = 2, were determined from the results of a strain-rate-change test and a creep test at constant initial stress using samples having various grain sizes, respectively. The activation energy for creep, Q_c at constant stress was calculated to be 350 kJ/mole. It is concluded that the superplastic deformation mechanism of the material under study is grain boundary sliding controlled by lattice diffusion in the TiAl phase.     

Design optimization of tall tubular lead/acid cells based on an analysis of the reaction distribution

In order to estimate the discharge performance of tall lead/acid cells (with tubular positives), changes in current and potential distributions with discharge progress were calculated with a computer on the basis of plate resistance and the current—potential—time relationship between small facing parts of positive and negative plates. The taller the cell, the larger the voltage drop along the plates. Thus, the discharge time became shorter despite a large amount of available active mass remaining in the bottom part of the plates.Various current-collector designs were evaluated, e.g., one with varying resistance at each height; a side conductor placed along the plates and connected to them at the top, centre and bottom, etc. Results revealed an optimum collector design with which the maximum discharge capacity could be obtained. Furthermore, it was shown that the side conductor markedly improved the discharge performance because the active mass near the connecting parts was appreciably used.     

Reexamination of grain-boundary sliding by diffusion

Steady-state sliding of grain boundaries is discussed by taking into account the change in the potential energy of an applied stress, when the sliding occurs by diffusional accommodation. The present analysis enables us to derive the sliding rates at boundaries of various shapes in a simple manner without knowing local stress fields. Sliding rate of a boundary containing second phase particles is also derived by similar calculations. The results are compared with previous calculations by other investigators, and it is found that the resultant expressions for the sliding rates are essentially identical to those derived from more complex analyses.     

Discharge behaviour of electrodeposited PbO2 and Pb electrodes

The discharge behaviour of electrodeposited lead dioxide and lead electrodes was investigated under various conditions; the surfaces of the discharged electrodes were observed with a scanning electron microscope. Both the positive and negative electrodes were passivated by a covering of deposited lead sulphate crystals. The amount of lead sulphate required for passivation depended on the size of the crystals.     

High-frequency ultrasonic cleaning tank utilizing oblique incidence

Transmission characteristics of a double-structured tank, used for high-frequency (1 MHz range) ultrasonic cleaning of semiconductor wafers and substrates, were improved by utilizing oblique incidence of ultrasonic waves. As the sound transmittivity through a plate in water varies with the angle of incidence, the bottom of the Pyrex glass inner container was slanted at the angle where strong transmission occurred. In the slant-bottom container, an intensive and uniform sound pressure distribution was measured with a polyvinylidene fluoride (PVDF) hydrophone probe. In comparison with the conventional horizontal-bottom container, it was shown that the distributions as well as amplitude of sound pressure were remarkably improved by slanting the bottom of the inner container at the proper angle     

A Novel Artificially Humanized Anti-Cripto-1 Antibody Suppressing Cancer Cell Growth

Cripto-1 is a member of the EGF-CFC/FRL1/Cryptic family and is involved in embryonic development and carcinogenesis. We designed a novel anti-Cripto-1 artificial antibody and assessed the recognition to the antigen and the potential to suppress the growth of cancer stem cells. First, single chain antibody clones were isolated by bio-panning with the affinity to recombinant Cripto-1 protein from our original phage-display library. Then, the variable regions of heavy chain VH and light chain VL in each clone were fused to constant regions of heavy chain CH and light chain CL regions respectively. These fused genes were expressed in ExpiCHO-S cells to produce artificial humanized antibodies against Cripto-1. After evaluation of the expression levels, one clone was selected and the anti-Cripto-1 antibody was produced and purified. The purified antibody showed affinity to recombinant Cripto-1 at 1.1 pmol and immunoreactivity to cancer tissues and cell lines. The antibody was available to detect the immunoreactivity in tissue microarrays of malignant tumors as well as in Cripto-1 overexpressing cells. Simultaneously, the antibody exhibited the potential to suppress the growth of human colon cancer derived GEO cells overexpressing Cripto-1 with IC₅₀ at approximately 110 nM. The artificially humanized antibody is proposed to be a good candidate to target cancer cells overexpressing Cripto-1.