Peer-assisted learning interventions with elementary school students: A meta-analytic review.

A meta-analytic review of group comparison design studies evaluating peer-assisted learning (PAL) interventions with elementary school students produced positive effect sizes (ESs) indicating increases in achievement (unweighted mean ES = 0.59, SD = 0.90; weighted ES, d = 0.33, p     

Preparation of Titanium Nitride Films from Amide Precursors Synthesized by Electrolysis

A TiN precursor solution was synthesized by galvanostatic electrolysis of Ti metal and isopropylamine at a current density of 50 mA·cm⁻² at room temperature. TiN films were prepared by dip-coating of the precursor solution on a Si wafer, followed by two-stage heat treatment at 400°C and a fixed temperature of 800–1200°C in flowing N₂, N₂/NH₃, or NH₃ gas. The TiN films were characterized by XRD, chemical analysis, XPS, and electrical resistivity measurements. The TiN films were composed of uniform grains 20 to 200 nm in size with thicknesses ranging from 300 to 400 nm at temperatures of 800–1200°C. The effect of the heat treatment atmosphere (N₂ and NH₃) on the impurity content, crystallinity, particle size, and electrical resistivity is discussed.     

Expectations and Experiences With MyLabourParty: From Right to Know to Right to Participate?

Social media are often argued to change political communication, decreasing the distance between politicians and citizens, and increasing citizens' influence on policymaking. This paper presents findings from a study of how the Norwegian Labour Party uses social media, focusing on the community platform MyLabourParty. Interviews with politicians and a survey with citizens as respondents were conducted to examine the experiences of online political discussions. Findings show that citizens and politicians expect MyLabourParty to strengthen citizen participation. Yet, citizens still experience communication asymmetry and politicians may find it challenging to participate to the extent citizens expect. Means for bridging the gap between expectations and experiences are called for, in particular redefinition of the offering, changes of user‐practices, and system improvements.     

Furan in the baby-food samples purchased from the Finnish markets – Determination with SPME–GC–MS

A method applying solid-phase microextraction followed by gas chromatography–mass spectrometric determination was in-house validated and used to study furan concentrations in baby-food samples purchased from the Finnish markets. The validation parameters showed that the method was well applicable for the reliable analysis of furan. Furan was analysed in 21 different baby-food samples as three independent replicates. The mean levels of furan varied between 4.7 and 90.3 μg kg⁻¹ being well in accordance with the levels reported in other studies. The mean concentrations of similar product formulas based on their ingredients were 9.2, 37.0 and 49.6 μg kg⁻¹ for fruit-, vegetables- and meat-containing baby-foods, respectively. According to the statistical analyses, fruit-based baby-food samples had significantly lower concentrations of furan as compared to other formulas. Based on our exercise, it seems that a low margin of safety exists between the extreme worst case infant exposures and the deduced NOAEL of furan on experimental animals, particularly for a clear rodent carcinogen.     

Identification of the Thermodynamically Stable Fe‐Containing Phase in Aged Cement Pastes

Current developments in cement chemistry increasingly rely on predictive thermodynamic modeling of the phase composition in cementitious composites with the aim of linking the performance of the material with the phase composition of the material. This approach requires identification of the cement phases that form in hydrating cementitious materials using standard techniques, such as X‐ray diffraction (XRD) and thermal analysis (DTA, TGA), but also state‐of‐the‐art synchrotron‐based techniques, in particular for those cases in which the signals of solid solutions overlap in XRD and TGA measurements. In this study, two ordinary Portland cements, with different chemical compositions and subject to different hydration times (~10, ~50 yr), were investigated aiming at identifying the most stable Fe‐containing cement phase in the cement pastes. The Fe‐containing cement phases and their solid solutions with the Al analogues in the complex cement matrix were analyzed with X‐ray absorption spectroscopy, indicating the formation of a mixed Fe–Al siliceous hydrogarnet as the major Fe‐containing phase. The presence of this phase after long hydration periods and upon selective dissolution of the pastes further indicates that, independent of the chemical compositions of cements, formation of the mixed Fe–Al siliceous hydrogarnet is thermodynamically favored in aged pastes, which is supported by published thermodynamic calculations.     

Decolorization of textile dyes by Bjerkandera sp. BOL 13 using waste biomass as carbon source

BACKGROUND: Phanerochaete chrysosporium, Trametes versicolor and Bjerkandera sp BOL13 were compared for decolorization of azo dyes supplied individually or as a mixture. The dye decolorization was also evaluated during continuous treatment under non‐sterile conditions using a lignocellulosic growth substrate. RESULTS: Bjerkandera sp BOL13 showed the highest dye decolorization potential. This fungus was also found to support high decolorization of Remazol Red RR at an initial pH of 4‐6 and when using straw as co‐substrate. The fungus was evaluated for Remazol Red RR decolorization in a continuously fed packed‐bed bioreactor operated under non‐sterile conditions with 3 days of hydraulic retention time. When glucose was supplied as growth‐substrate, decolorization efficiencies of 65‐90% were maintained for 12 days in a bioreactor packed with wooden material. The decolorization efficiency was lower when glucose was not fed to the fungus or when a plastic material was used as packing. Higher manganese peroxidase and laccase activities were also recorded when the wood packing was used. Contamination caused a drop in decolorization efficiency after 17‐19 days operation. CONCLUSIONS: The potential of Bjerkandera sp BOL13 for decolorization of azo dyes under non‐sterile conditions using lignocellulosic growth substrates was demonstrated. Research is needed to reduce contamination under non‐sterile conditions. © 2012 Society of Chemical Industry     

Effect of Silver Loading on the Lean NOx Reduction with Methanol Over Ag–Al2O3

The influence of silver loading on the lean NO_x reduction activity using methanol as reductant has been studied for alumina supported silver catalysts. In general, increasing the silver loading (0–3 wt%), in Ag–Al₂O₃, shifts or extends the activity window, for lean NO_x reduction towards lower temperatures. In particular Ag–Al₂O₃ with 3 wt% silver is active for NO_x reduction under methanol-SCR conditions in a broad temperature interval (200–500 °C), with high activity in the low temperature range (maximum around 300 °C) typical for exhaust gases from diesel and other lean burn engines. Furthermore, increasing the C/N molar ratio enhances the reduction of NO_x. However, too high C/N ratios results in poor selectivity to N₂.     

Impacts on Children of a Policy to Promote Employment and Reduce Poverty for Low-Income Parents: New Hope After 5 Years.

The impacts of New Hope, a program to increase parent employment and reduce poverty, were measured 5 years after parents were randomly assigned to program or control groups. New Hope had positive effects on children's school achievement, motivation, and social behavior, primarily for boys, across the age range 6-16. In comparison to impacts measured 2 years after program onset, effects on achievement were robust, but effects on social behavior were reduced. The program produced improvements in family income and use of organized child care and activity settings, suggesting possible pathways by which the New Hope package of policies influenced children's behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Thermophilic hydrogen production from cellulose with rumen fluid enrichment cultures: Effects of different heat treatments

Elevated temperatures (52, 60 and 65 °C) were used to enrich hydrogen producers on cellulose from cow rumen fluid. Methanogens were inhibited with two different heat treatments. Hydrogen production was considerable at 60 °C with the highest H₂ yield of 0.44 mol-H₂ mol-hexose⁻¹ (1.93 mol-H₂ mol-hexose-degraded⁻¹) as obtained without heat treatment and with acetate and ethanol as the main fermentation products. H₂ production rates and yields were controlled by cellulose degradation that was at the highest 21%. The optimum temperature and pH for H₂ production of the rumen fluid enrichment culture were 62 °C and 7.3, respectively. The enrichments at 52 and 60 °C contained mainly bacteria from Clostridia family. At 52 °C, the bacterial diversity was larger and was not affected by heat treatments. Bacterial diversity at 60 °C remained similar between heat treatments, but decreased during enrichment. At 60 °C, the dominant microorganism was Clostridium stercorarium subsp. leptospartum.     

Soft X-ray spectromicroscopy of cobalt uptake by cement

Scanning transmission X-ray microscopy was used to investigate the speciation and spatial distribution of Co in a Co(II)-doped cement matrix. The aim of this study was to improve the understanding of the heavy metals immobilization process in cement on the molecular level. The Co-doped cement samples hydrated for 30 days with a Co loading of 5000 mg/kg were prepared under normal atmosphere to simulate conditions used for cement-stabilized waste packages. Co 2p(3/2) absorption edge signals were used to determine the spatial distributions of the metal species in the Co(II)-doped cement. The speciation of Co was determined by collecting near-edge X-ray absorption fine structure spectra. On the basis of the shape of the absorption spectra, it was found that Co(II) is partly oxidized to Co(III). The correlation, respectively the anticorrelation with elements such as Al, Si, and Mn, show that Co(II) is predominantly present as Co-hydroxide-like phase as well as Co-phyllosilicate, whereas Co(III) tends to be incorporated only into a CoOOH-like phase. Thus, this study suggests that thermodynamic calculations of Co(II)-immobilization by cementitious systems should take into consideration not only the solubility of Co(II)-hydroxides but also Co(III) phases.