Effect of eccentricity on transitional mixing in vessel equipped with turbine impellers

In this paper, the results of the experimental studies of the mixing time, as well as the power consumption and baffle presence in the stirred tank with dual eccentrically located impellers are presented. The experiments were carried out in an unbaffled flat-bottomed cylindrical vessel. Three types of impellers were used: Rushton turbine, six pitched blade turbine and six flat blade turbine. The obtained data show that eccentricity of dual impeller systems leads to reduction of mixing time. Moreover, the experimental data confirmed the enlargement of power consumption in such systems. In the paper the analysis of relation between eccentricity ratio and mixing time has been performed.     

Self-Bonded Zeolite Beta/MCM-41 Composite Spheres

Self-bonded zeolite Beta/MCM-41 composite spheres were prepared using a two-step synthesis procedure. In the first step, mesoporous zeolite Beta spheres were obtained using anion exchange resin as macrotemplate. In the second step, the MCM-41 or Al-MCM-41 was grown both on sphere surfaces and in the pore structure of the pre-formed zeolite Beta spheres. Finally, the templating agents used in the synthesis of mesophase were removed by calcination leaving behind self-bonded Beta/MCM-41 composite spheres. Beta/MCM-41 composites were characterized by XRD, SEM and nitrogen adsorption measurements. Materials with controlled macroshape, composition and complex porosity were prepared by the approach.     

Carbon spheres prepared from zeolite Beta beads

Porous carbon beads were prepared from macroporous anion-exchange resin beads preliminary converted into resin-zeolite Beta composite or pure zeolite Beta spheres. Two synthesis procedures were used depending on the initial template employed. In a series of experiments, the resin from the resin-zeolite Beta composite was directly carbonized into carbon. In another series of experiments, the resin was removed by oxidation at 600 °C leaving behind self-bonded zeolite Beta beads, which were filled with carbon by chemical vapor deposition (CVD) of propylene. As a final step for both procedures, the zeolite was dissolved in hydrofluoric acid. All the carbons prepared inherited the macroscopic spherical shape of the template spheres as well as the morphology of the primary particles building up the beads. The synthesis procedure and the carbonization temperature or the temperature for CVD of carbon employed influenced the ordering and the pore structure of the produced carbons. The carbons prepared by direct carbonization showed relatively low surface areas, less than 1000 m² g⁻¹, and no zeolite structural regularity. The samples obtained via CVD maintained the zeolite ordering with a periodicity of 11.7 Å and had surface areas of over 2000 m² g⁻¹.     

Gravimetric and spectroscopic studies of the chemical combination of moisture by as-fired and reheated terracotta

The application of microbalance measurements to investigate the chemical recombination of moisture with fired clay ceramics is demonstrated. The kinetics of mass gain at constant temperature and relative humidity (RH) are studied for terracotta fired at temperatures between 800 °C and 1200 °C. The experimental results show that mass gain proceeds in two stages. The second stage mass gain is taken as a measure of the capacity for long-term chemical combination with moisture based on the (time)^1/4 law. A maximum rate of mass gain is obtained for terracotta fired at 1000 °C. It is shown that reheating a sample of fired terracotta at any temperature between 500 °C and the original firing temperature will return the material to its as-fired state. This is supported by Raman spectroscopy. Exceeding the original firing temperature during reheating alters the subsequent rate of reaction to moisture, suggesting a method for determining the original firing temperature of ceramic artefacts.     

The analysis of pneumatic atomization of Newtonian and non-Newtonian fluids for different medical nebulizers

Objective: The article contains results of the experimental studies on atomization process of inhaled drugs and aqueous solutions of glycerol with aqueous solutions of glycerol polyacrylamide (Rokrysol WF1) in pneumatic nebulizers. In experiments, the different concentration of aqueous solutions of glycerol polyacrylamide have been tested. In addition, the effect of nebulizer design on atomization process has been determined. The one of the main elements of medical pneumatic nebulizer is nebulizer cup.

Significance: The experiment with this scope is new and is very important from the point of view of aerosol therapy.

Methods: The results have been obtained by the use of the digital microphotography technique. In order to determine a physicochemical properties of tested liquids, a rheological measurements and measurements of the surface tension were carried out.

Results: The differences between characteristics of aerosol for the liquids have been observed. The analysis of the droplets size distributions shows that the different diameters of droplets for Newtonian and non-Newtonian fluids have been formed during atomization in pneumatic nebulizers equipped with different nebulizer cups. The effect of the mouthpiece location on the droplets diameters has been shown.

Conclusions: Precise design of nebulizer and nebulizer cups, and also physicochemical properties of atomized liquids are of high importance in order to the effectiveness of drug delivery to patient’s respiratory tracts.