Phase Diagram,Equilibrium Data,and Correlation for Aqueous Two-Phase System Formed by Tetrahydrofuran and Sorbitol

Theoretical Foundations of Chemical Engineering - The importance of aqueous two-phase systems has been increased recently as a method with greater performance capability in separation and...     

Effect of apple cider vinegar agent on the microstructure,phase evolution,and magnetic properties of CoFe2O4 magnetic nanoparticles

In the present study, spinel structure CoFe₂O₄ nanoparticles were successfully synthesized by the sol-gel auto-combustion technique. The effect of apple cider vinegar (ACV) addition as an organic biocompatible agent on the size, morphology, and magnetic properties of CoFe₂O₄ nanoparticles was investigated in detail. The phase evolution, particle size, and lattice parameter changes of the synthesized phase have been estimated by using Rietveld structure refinement analysis of X-ray powder diffraction data. Also, Fourier transform infrared spectra (FT-IR) of the samples verified the presence of two expected bands correspond to tetrahedral and octahedral metal-oxygen complexes within the spinel structure. Furthermore, microstructural observations revealed that ultrafine particles have a semi-spherical morphology. It was shown that the particles size decreased from ~45 to ~17 nm with an increase in the amount of ACV. Magnetic properties were carried out by vibrating sample magnetometer (VSM) at room temperature. Both the saturation magnetization (M_s) and coercivity (H_c) were found to be significantly dependent on the crystallite size and the amount of ACV.     

Compressive strength and wear properties of SiC/Al6061 composites reinforced with high contents of SiC fabricated by pressure-assisted infiltration

Pressure-assisted infiltration was used to synthesize SiC/Al 6061 composites containing high weight percentages of SiC. A combination of PEG and glass water was used to fabricate SiC preforms and the effect of the presence of glass water on the microstructure and mechanical properties of the preforms was evaluated by performing compression tests on the preforms. Also, the compressive strength and the hardness of the SiC/Al composites were investigated. The results revealed that the glass water improved the compressive strength of the preforms by about five times. The microstructural characterization of the composites showed that the penetration of the aluminum melt into the preforms was completed and almost no porosity could be seen in the microstructures of the composites. Moreover, the composite containing 75 wt% SiC exhibited the highest compressive strength as well as the maximum hardness. The results of the wear tests showed that increasing the SiC content reduces the wear rate so that the Al-75 wt% SiC composite has a lower wear rate and a lower coefficient of friction than those of Al-67 wt% SiC composite. This indicated higher wear resistance in these composites than the Al alloy due to the formation of a tribological layer on the surface of the composites.     

Formal process algebraic modeling,verification, and analysis of an abstract Fuzzy Inference Cloud Service

In cloud computing, services play key roles. Services are well defined and autonomous components. Nowadays, the demand of using Fuzzy inference as a service is increasing in the domain of complex and critical systems. In such systems, along with the development of the software, the cost of detecting and fixing software defects increases. Therefore, using formal methods, which provide clear, concise, and mathematical interpretation of the system, is crucial for the design of these Fuzzy systems. To obtain this goal, we introduce the Fuzzy Inference Cloud Service (FICS) and propose a novel discipline for formal modeling of the FICS. The FICS provides the service of Fuzzy inference to the consumers. We also introduce four novel formal verification tests, which allow strict analysis of certain behavioral disciplines in the FICS as follows: (1) Internal consistency, which analyzes the service in a strict and delicate manner; (2) Deadlock freeness; (3) Divergence freeness; and (4) Goal reach ability. The four tests are discussed and the FICS is verified to ensure that it can pass all these tests.     

Aqueous solution of Oxone as new oxidizing agent for multi-walled carbon nanotube functionalization

In this work, multi-wall carbon nanotube (MWCNT) was successfully modified using aqueous solution of Oxone as a new oxidant. The effect of oxidation temperature on various characteristics of the treated MWCNTs was also investigated. FTIR and titration analysis proved the formation of carboxyl, carbonyl and epoxide groups at the surface of MWCNTs. The concentration of the functional groups increased as the modification temperature increased. The presence of such oxygen containing groups at the surface of MWCNTs justified the long time stability of the treated MWCNTs suspensions in water and methanol. The modified MWCNTs showed higher entanglement compared to row MWCNT due to the cross-links adjacent effect of pendant functional groups. Finally, it was concluded that Oxone oxidation process destroys the structure of the MWCNTs, but not severe enough to unzip the MWCNTs.     

Medium access control layer management for saving energy in wireless sensor networks routing algorithms

Wireless sensor networks (WSNs) consist of small nodes that are capable of sensing, computing, and communication. One of the greatest challenges in WSNs is the limitation of energy resources in nodes. This limitation applies to all of the protocols and algorithms that are used in these networks. Routing protocols in these networks should be designed considering this limitation. Many papers have been published examining low energy consumption networks. One of the techniques that has been used in this context is cross-layering. In this technique, to reduce the energy consumption, layers are not independent but they are related to each other and exchange information with each other. In this paper, a cross-layer design is presented to reduce the energy consumption in WSNs. In this design, the communication between the network layer and medium access layer has been established to help the control of efforts to access the line to reduce the number of failed attempts. In order to evaluate our proposed design, we used the NS2 software for simulation. Then, we compared our method with a cross-layer design based on an Ad-hoc On-demand Distance Vector routing algorithm. Simulation results show that our proposed idea reduces energy consumption and it also improves the packet delivery ratio and decreases the end-to-end delay in WSNs.     

Petrophysical data prediction from seismic attributes using committee fuzzy inference system

This study presents an intelligent model based on fuzzy systems for making a quantitative formulation between seismic attributes and petrophysical data. The proposed methodology comprises two major steps. Firstly, the petrophysical data, including water saturation (S_w) and porosity, are predicted from seismic attributes using various fuzzy inference systems (FISs), including Sugeno (SFIS), Mamdani (MFIS) and Larsen (LFIS). Secondly, a committee fuzzy inference system (CFIS) is constructed using a hybrid genetic algorithms-pattern search (GA-PS) technique. The inputs of the CFIS model are the outputs and averages of the FIS petrophysical data. The methodology is illustrated using 3D seismic and petrophysical data of 11 wells of an Iranian offshore oil field in the Persian Gulf. The performance of the CFIS model is compared with a probabilistic neural network (PNN). The results show that the CFIS method performed better than neural network, the best individual fuzzy model and a simple averaging method.     

Multi-criteria decision making for assembly line balancing

Assembly line balancing often has significant impact on performance of manufacturing systems, and is usually a multiple-objective problem. Neither an algorithmic nor a procedural assembly line balancing methodology is usually effective in solving these problems. This article proposes a data envelopment analysis (DEA) approach to solve an assembly line balancing problem. A computer-aided assembly line balancing tool as Flexible Line Balancing software is used to generate a considerable number of solutions alternatives as well as to generate quantitative decision-making unit outputs. The quantitative performance measures were considered in this article. Then DEA was used to solve the multiple-objective assembly line balancing problem. An illustrative example shows the effectiveness of the proposed methodology.     

An efficient classifier to diagnose of schizophrenia based on the EEG signals

In this paper, electroencephalogram (EEG) signals of 13 schizophrenic patients and 18 age-matched control participants are analyzed with the objective of classifying the two groups. For each case, multi-channels (22 electrodes) scalp EEG is recorded. Several features including autoregressive (AR) model parameters, band power and fractal dimension are extracted from the recorded signals. Leave-one (participant)-out cross validation is used to have an accurate estimation for the separability of the two groups. Boosted version of Direct Linear Discriminant Analysis (BDLDA) is selected as an efficient classifier which applied on the extracted features. To have comparison, classifiers such as standard LDA, Adaboost, support vector machine (SVM), and fuzzy SVM (FSVM) are applied on the features. Results show that the BDLDA is more discriminative than others such that their classification rates are reported 87.51%, 85.36% and 85.41% for the BDLDA, LDA, Adaboost, respectively. Results of SVM and FSVM classifiers were lower than 50% accuracy because they are more sensitive to outlier instances. In order to determine robustness of the suggested classifier, noises with different amplitudes are added to the test feature vectors and robustness of the BDLDA was higher than the other compared classifiers.