Nonenzymic browning during storage of white hard grape pekmez (Zile pekmezi)

Effects of storage period on hydroxymethylfurfural, pH and colour were studied in white hard grape pekmez (Zile pekmezi), a Turkish traditional product. Pekmez samples were stored at 20 °C for 8 months. Analysis of variance revealed significant differences in hydroxymethylfurfural, pH, L, a and b values (P<0.01) based on storage time.     

DETERMINATION OF MOISTURE DIFFUSIVITY OF PINE NUT SEEDS

The mechanism of drying and the diffusion of water in fresh pine nut seeds (2.5-2.62mm diameter) were successfully interpreted and modeled by using Fick's law. The initial moisture content of fresh pine nut seed was 23-24% and drying temperatures (45-60°C) were varied, but the drying air was kept at constant velocity and humidity.

The effective diffusivity was estimated from drying rate curves and expressed by an Arhenius relation. In addition, the absorption, and desorption-isotherms for fresh pine nuts were estimated at 20°C at water activity of 0.15-1.00. The isotherms of the fresh pine nuts were estimated in experimental runs.     

Preparation of epoxy composites with CTAB‐modified BN and MWCNTs

In this study, multi‐walled carbon nanotubes (MWCNTs) and boron nitride (BN) were functionalized with cetyltrimethylammonium bromide (CTAB) at both pH 5.5 and pH 11. These MWCNT‐CTAB and BN‐CTAB particles used to prepare the composites were dispersed in a bisphenol A (DGEBA)‐type epoxy resin (ER) system at room temperature. The TGA analysis showed that the BN composite can significantly improve the thermal stability of neat ER at temperatures above 400 °C. The curing degrees of the nanocomposites were calculated to be approximately the same values as neat ER using the Beer–Lambert law from FTIR spectra. The best electrical conductivity of the composites obtained was 3.10 × 10⁻³ S/cm for ER/MWCNT‐CTAB (pH 5.5). The surface hardness, Young's modulus, and tensile strength of the composites were examined. The surface hardness values of the ER/MWCNT‐CTAB composites were higher than those of the other composites. The composite morphology was characterized using X‐ray diffraction (XRD) and scanning electron microscopy (SEM). POLYM. COMPOS., 37:3423–3432, 2016. © 2015 Society of Plastics Engineers     

The effect of carboxylic acid group on conductivity of the aromatic polyazomethines and char composites

One of the properties gained by COOH groups of polymer, exists in aromatic polyazomethine (PAM) in the main chain, is the increase in the conductivity. In this study, the PAMs including carboxylic acid in subgroups as condensation polymerization products were obtained. The electrical conductivity of the polymers was enhanced by many orders of magnitude by PAM. The carboxylic acid group increase the electrical conductivity in two ways are: (i) increasing chain flexibility and (ii) allowing movement of the charge carrier more easily along the chain. Additionally, in this study, the polymer composites were obtained using the carbon material (char) derived from the 400°C pyrolysis of waste polyethylene terephthalates. It was observed that conductivity also increased due to char in the composites formed by the PAMs with char. The lowest E_g value of 0.55 eV was determined in poly‐2‐carboxyl‐1,4‐bis[(diphenylether)methylene]phenylenediamine/char composite. The structures of the obtained polymers were confirmed by FTIR, UV–vis, TGA,¹H NMR, and EDX techniques. The molecular weight distribution parameters of the synthesized compounds were determined with the size exclusion chromatography. POLYM. COMPOS., 35:372–380, 2014. © 2013 Society of Plastics Engineers     

Antioxidant and anticholinesterase evaluation of selected Turkish Salvia species

Since Salvia species (Lamiaceae) have been recorded to be used against memory loss in European folk medicine, we herein examined in vitro anticholinesterase and antioxidant activities of 56 extracts prepared with petroleum ether, chloroform, ethyl acetate and methanol obtained from 14 Salvia species (Salvia albimaculata Hedge and Hub, Salvia aucheri Bentham var. canescens Boiss and Heldr, Salvia candidissima Vahl. ssp. occidentalis, Salvia ceratophylla L., Salvia cryptantha Montbret and Bentham, Salvia cyanescens Boiss and Bal., Salvia frigida Boiss, Salvia forskahlei L., Salvia halophilaHedge, Salvia migrostegia Boiss and Bal., Salvia multicaulis Vahl., Salvia sclarea L., Salvia syriaca L., Salvia verticillata L. ssp. amasiaca) growing in Turkey. The antioxidant activities were assessed by both chemical and enzymatic methods against 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging and xanthine/xanthine oxidase (XO) system generated superoxide anion radical inhibition. Anticholinesterase effect of the extracts was tested against both acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) at concentrations of 0.2 and 1 mg/ml using a microplate-reader assay based on the Ellman method. Most of the extracts did not show any activity against AChE at 0.2 mg/ml, while the chloroform extracts had noticeable inhibition against BChE between 47.7% and 74.7%. The most active extracts at 1 mg/ml for AChE inhibition were observed to be petroleum ether extract of Salvia albimaculata (89.4%) and chloroform extract of Salvia cyanescens (80.2%), whereas ethyl acetate extracts of Salvia frigida and Salvia migrostegia, chloroform extracts of Salvia candidissima ssp. occidentalis and Salvia ceratophylla, as well as petroleum ether extract of Salvia cyanescens were found to inhibit potently BChE (92.2%, 89.6%, 91.1%, 91.3%, and 91.8%, respectively). Particularly, the ethyl acetate and methanol extracts were observed to be highly active against both DPPH and XO. Our data indicates that nonpolar extracts of Salvia species for anticholinesterase activity and the polar extracts for antioxidant activity are worth further phytochemical evaluation for identifying their active components.     

Insights into research on phytochemistry and biological activities of Prunus armeniaca L. (apricot)

Prunus armeniaca L. (Rosaceae) is an important medicinal edible plant species commonly known as “apricot”. Apricot is one of the most delicious and commercially traded fruits in the world. The plant is rich in mono- and polysaccharides, polyphenols, fatty acids and sterol derivatives, carotenoids, cyanogenic glucosides, and volatile components due to its appealing smell. P. armeniaca has been also investigated for various biological activities such as antimicrobial, antimutagenic, inhibitory activity against several enzymes, cardioprotective, anti-inflammatory and antinociceptive as well as antioxidant activity. Among these activities, antioxidant activity of apricot has been studied extensively and the plant displayed a high antioxidant effect in both in vitro and in vivo test systems. In this review, the relevant literature summary is given on phytochemistry and biological activity reports published on apricot. The literature survey for this review was performed using the key words “Prunus armeniaca and apricot” through the search Scopus, ScienceDirect, Pubmed, and Web of Science data bases between 1950 and 2010.     

Reflex sympathetic dystrophy syndrome due to arteriovenous fistula

A patient with end-stage renal disease presented with reflex sympathetic dystrophy syndrome (RSDS) on her left hand 1 month after arteriovenous fistula (AVF) surgery. Magnetic resonance angiography revealed steal syndrome at the AVF level. Bone scintigraphy revealed early-stage RSDS. We considered that arterial insufficiency because of steal phenomenon following AVF surgery and underlying occlusive arterial disease triggered RSDS development.     

Charge collection and pore filling in solid-state dye-sensitized solar cells

The solar to electrical power conversion efficiency for dye-sensitized solar cells (DSCs) incorporating a solid-state organic hole-transporter can be over 5%. However, this is for devices significantly thinner than the optical depth of the active composites and by comparison to the liquid electrolyte based DSCs, which exhibit efficiencies in excess of 10%, more than doubling of this efficiency is clearly attainable if all the steps in the photovoltaic process can be optimized. Two issues are currently being addressed by the field. The first aims at enhancing the electron diffusion length by either reducing the charge recombination or enhancing the charge transport rates. This should enable a larger fraction of photogenerated charges to be collected. The second, though less actively investigated, aims to improve the physical composite formation, which in this instance is the infiltration of mesoporous TiO(2) with the organic hole-transporter 2,2',7,7'-tetrakis(N,N-di-p-methoxypheny-amine)-9,9'-spirobifluorene (spiro-MeOTAD). Here, we perform a broad experimental study to elucidate the limiting factors to the solar cell performance. We first investigate the charge transport and recombination in the solid-state dye-sensitized solar cell under realistic working conditions via small perturbation photovoltage and photocurrent decay measurements. From these measurements we deduce that the electron diffusion length near short-circuit is as long as 20?μm. However, at applied biases approaching open-circuit potential under realistic solar conditions, the diffusion length becomes comparable with the film thickness, ～2?μm, illustrating that real losses to open-circuit voltage, fill factor and hence efficiency are occurring due to ineffective charge collection. The long diffusion length near short-circuit, on the other hand, illustrates that another process, separate from ineffective charge collection, is rendering the solar cell less than ideal. We investigate the process of TiO(2) mesopore infiltration with spiro-MeOTAD by examining the cross-sectional images of and performing photo-induced absorption spectroscopy on devices with a range of thickness, infiltrated with spiro-MeOTAD with a range of concentrations. We present our interpretation of the mechanism for material infiltration, and by improving the casting conditions demonstrate efficient charge collection through devices of over 7?μm in thickness. This investigation represents an improvement in our understanding of the limiting factors to the dye-sensitized solar cell. However, much work, focused on composite formation and improved kinetic competition, is required to realize the true potential of this concept.     

Epoxy composites based on inexpensive char filler obtained from plastic waste and natural resources

In this study, plastic [polyethylene terephthalate (PET)] waste was recycled as raw material for the preparation of diglycidyl ether of bisphenol A‐type epoxy composite materials. The other inexpensive fillers used to prepare the composites were wood shavings char and pine cone char (PCC), obtained from natural resources. The thermogravimetric analysis showed that plastic waste char (PWC) and PCC can significantly improve the thermal stability of neat epoxy resin at temperatures above 300°C. The best thermal and electrical conductivity results were obtained with PWC. The residual weight of the composite with 30 wt% PWC was 69%. Surface hardness, Young's modulus, and tensile strength of the composites were higher than those with a pure epoxy polymer matrix. The composite morphology was characterized by X‐ray diffraction and scanning electron microscopy. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers