Effect of olive residue benzylation on the thermal and mechanical properties of poly(vinyl chloride)/olive residue composites

The changes in mechanical properties, the thermal stability, and the water absorption capacity of poly (vinyl chloride)/olive residue flour composites were studied as a function of various residue olive flour ratios, i.e., 0, 5, 15, and 25% by weight taking into account the effect of benzylation chemical treatment of the filler. The study showed that composite samples prepared with the untreated filler exhibited higher tensile modulus and hardness compared with the neat resin, whereas elongation and tensile strength were observed to decline. On the other hand, the PVC hardness was found to increase with addition of the untreated olive residue flour (ORF), however the composite samples prepared with the benzylated flour exhibited lower hardness than those prepared with untreated olive residue. Moreover, the amount of absorbed water depends on the amount of filler in the composite. The comparison of the results obtained from the samples of F5, F20, and F30 formulations between the untreated and treated ORF indicated a reduction in absorbed water for the composite samples containing treated ORF with benzyl chloride. As a result, the mechanical properties of the treated composites were improved. Furthermore, the thermal characterization of the different samples carried out by color change test and thermogravimetric analysis revealed an increase in the onset temperatures of decomposition for the treated composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Adding Transition Metals to Copper on the Dehydrogenation Reaction of Ethanol

The present work aims to investigate the effect adding Ag, Co, Ni, Cd and Pt to copper on ethanol dehydrogenation. The catalysts synthesized by deposition–precipitation method were characterized using various physicochemical methods such as N₂ adsorption–desorption, TPR, SEM–EDX, XRD, XPS and TGA–DSC-MS. Catalytic evaluation results revealed that the predominant product of the reaction was acetaldehyde. Monometallic copper or mixed with Cd, Ag or Co show good catalytic performances. Adding nickel to copper improves the process conversion but reduces acetaldehyde selectivity, giving rise to methane in produced hydrogen. Pt-Cu/SiO₂ catalyst guides the reaction towards diethyl ether. Time on stream tests performed during 12 h at 260 °C, showed that adding Cd to Cu enhances its stability by over 30% of conversion, this is explained by the reduction of copper crystallites sintering, which makes Cd-Cu/SiO₂ a promising catalyst for the production of acetaldehyde by ethanol dehydrogenation.

Graphic Abstract

     

Multilevel assessment method for reliable design of composite structures

This work aims at demonstrating the interest of a new methodology for the design and optimization of composite materials and structures. Coupling reliability methods and homogenization techniques allow the consideration of probabilistic design variables at different scales. The main advantage of such an original micromechanics-based approach is to extend the scope of solutions for engineering composite materials to reach or to respect a given reliability level. This approach is illustrated on a civil engineering case including reinforced fiber composites. Modifications of microstructural components properties, manufacturing process, and geometry are investigated to provide new alternatives for design and guidelines for quality control.     

Reliability Prediction of Composite Tubular Structure Under Mechanical Loading by Finite Element Method

The diversified use of filamentary composites in harsh marine environments, recorded in recent years, has prompted researchers to focus their work on the reliability prediction. Through failure criteria, Tsai–Wu and the maximum stress, the reliability of multilayer tubular structures under mechanical loading is the subject of this paper, where Monte Carlo method estimated the failure probability. A sensitivity analysis was performed in order to identify the influence of the different parameters, such as materials’ properties, geometry, manufacturing and loading, on the reliability of the composite cylindrical structure studied. To achieve a high accuracy of the results, we have carried out 105 simulations. The results showed great influence on pressure loading, ply thickness and finally winding angle of filament composite.     

Reducing the migration of additives from plasticised poly(vinyl chloride)

This paper reports work studying the partial substitution of the commonly used plasticiser di-octyl phtalate (DOP) by the permanent plasticisers ethylene-vinyl-acetate (EVA) and acrylonitrile-butadiene-styrene (ABS) in order to reduce migration of additives initially present in poly(vinyl chloride) (PVC) stabilised with epoxidised sunflower oil (ESO). Various formulations with and without the two different permanent plasticisers were prepared. Their tensile properties were compared. Migration tests with agitation at 40°C in two food simulants (olive oil and 15% aqueous ethanol) were carried out. The mass variation of the PVC samples with time was investigated. Migration phenomena were studied by using various analytical methods such as Fourier transform infrared spectroscopy (FTIR), atomic absorption spectrometry (AAS) and scanning electron microscopy (SEM). The results showed that additives migration can be considerably reduced by partial substitution of DOP with both permanent plasticisers used. The best results were obtained with the binary system of plasticisers based on DOP:ABS (30:10).     

Study of effect of old corrugated cardboard in properties of polypropylene composites: Study of mechanical properties,thermal behavior,and morphological properties

The investigation of the economical use of lignocellulose waste, which is one of the environmental problems facing nations, is ongoing. In this study, waste cardboard paper fiber reinforcing polypropylene (PP) composites was developed. In order to modify the PP matrix maleated PP (MA‐g‐PP) a 5 wt% and a grafting rate of 1 and 2 wt% was used as a compatibilizer. The effects of fiber and compatibilizer content as well as graft content are evaluated by mechanical, thermal property measurements, and scanning electron microscopy (SEM). The compatibilizer improved all mechanical properties significantly. Thus, the tensile strength of MA‐g‐PP‐containing composites increases compared to PP/cardboard composites paper content increases. However, the tensile modulus of a PP‐based composite increases with an increase in paper fiber with the compatibilizer having little effect. SEM revealed that the addition of MA‐g‐PP generates strong interactions between a PP matrix and paper fibers. However, the addition of the MA‐g‐PP compatibilizing agent gives a significant improvement on the crystallization of the composites, whereas the compatibilized PP/old corrugated cardboard (OCC) composites have higher crystallinity (Xc) than uncompatibilized PP/OCC composites. The MA‐g‐PP also diminished the water absorption in the composites. J. VINYL ADDIT. TECHNOL., 22:231–238, 2016. © 2014 Society of Plastics Engineers     

A Taguchi design approach for the enhancement of a detergent-biocompatible alkaline thermostable protease production by Streptomyces mutabilis strain TN-X30

The ability of microorganisms to grow at high temperature, alkaline pH, and high salinity makes them an attractive target for enzyme-production with several industrial applications. One strain TN-X30 has been selected as protease producer and identified as Streptomyces mutabilis after a phenotypic and molecular study. Its production of protease was improved using Taguchi L27 design. The strategy was carried out to identify the optimum levels and the interaction of the screened factors. Following this step, maximum protease activity (10,895 U/ml) was achieved after 6-days of incubation. The TN-X30 protease activity had an optimum of pH and temperature of 10 and 65°C, respectively. Thermodynamic parameters at 60°C were enthalpy 14.26 kJ/mol, entropy −220 J/mol/K, and Gibbs free energy 90.53 kJ/mol. TN-X30 protease production displayed a 16-fold increase reaching 175,000 U/ml in a 100-L fermentor. Furthermore, the lyophilization in presence of sorbitol enhanced the stability of the TN-X30 protease which remained active at 75% after 24-months of storage. The lyophilized TN-X30 protease exhibited exceptional stability indexes in presence of some known commercialized detergent components as NEODOL® 25-7, Dehydol® LT 7, Na₂ CMC, Galaxy LAS, Galaxy LES 70, Galaxy 110, Galaxy CAPB Plus, and Sulfacid K. The lyophilized enzyme also displayed high stability with respect to both solid and liquid detergents. Finally, TN-X30 protease exhibited remarkable destaining of blood, egg, and chocolate stained cloth pieces. These findings may promote TN-X30 protease for use as bioadditive in detergent formulation, thereby reducing environmental chemical threat.