Theoretical estimation of dielectric loss of oxide glasses using nonequilibrium molecular dynamics simulations

To theoretically explore amorphous materials with a sufficiently low dielectric loss, which are essential for next-generation communication devices, the applicability of a nonequilibrium molecular dynamics simulation employing an external alternating electric field was examined using alkaline silicate glass models. In this method, the dielectric loss is directly evaluated as the phase shift of the dipole moment from the applied electric field. This method enabled us to evaluate the dielectric loss in a wide frequency range from 1 GHz to 10 THz. It was observed that the dielectric loss reaches its maximum at a few THz. The simulation method was found to qualitatively reproduce the effects of alkaline content and alkaline type on the dielectric loss. Furthermore, it reasonably reproduced the effect of mixed alkalines on the dielectric loss, which was observed in our experiments on sodium and/or potassium silicate glasses. Alkaline mixing was thus found to reduce the dielectric loss.     

遥操作工程机器人系统临场感技术研究-6自由度临场运动感觉反馈技术的研究进展

 研究开发出一种遥操作工程机器人系统，可以应用于诸如火灾现场的修复作业等广阔的领域．该系统由伺服控制的工程机器人、2根从远处操纵工程机器人的操纵杆、视频系统和6自由度运动模拟器组成．操作者坐于座椅上，座椅固定于运动模拟器的上方． 该系统需要解决的一个关键问题是如何使操纵者高质量地获得工作现场的临场运动感觉． 提出了一种6自由度临场运动感觉反馈方法，其信号源来自工程机器人上安装的6个加速度传感器． 该方法的有效性已为实验所证明，即应用6自由度运动模拟器不但可以高质量地模拟工程机器人单个自由度的运动：滚动、俯仰、转动以及前后、左右、上下的平移，而且可以高质量地模拟工程机器人的各种复合运动．     

Fracture toughness evaluation of adjacent flow weld line in polystyrene by the SENB method

Fracture toughness of adjacent flow weld lines, defined as weld lines that occur when two flow fronts meet and continue to flow together in the same direction (meld line or hot weld line), was evaluated by the single‐edge notched‐bend (SENB) method using three differently‐shaped obstructive pins. Although the fracture toughness varied depending upon the shapes of the pin, the values could be standardized as the distance from the meeting point of the two flow fronts flowing around the pin. The fracture toughness decreased drastically from the meeting point along the weld line and then slightly increased. These characteristic features could be explained by flow‐induced molecular orientation at the weld line interface. The molecules around the meeting point that were initially oriented parallel to the weld line due to fountain flow were able to relax, and then entanglement across the weld line interface developed because the flow stopped in the middle of the filling process, resulting in high fracture toughness. In contrast, the material at the downstream side of the weld line continued flowing during the filling process, being stretched along the flow direction. So, the molecular orientation at this area could not relax. In addition, the V‐notch shape, i.e., the depth and length at the surface of the weld line, which also varied depending on the shape of the obstacles, was considered to be identical when the meeting point was allowed to be a datum point. Thus, the meeting point was found to be a significant factor when the properties of weld lines are investigated. POLYM. ENG. SCI., 45:1059–1066, 2005. © 2005 Society of Plastics Engineers     

Theoretical model for flash generation

Reduction of flash generated in a gas vent is of great concern for manufacturers of electronic parts. The present study proposes a theoretical model for flash generation through consideration of flow characteristics in a gas vent. The model predicts the factors controlling flash, i.e., material parameters such as zero‐shear viscosity, crystallization temperature, thermal conductivity, and heat capacity, and process parameters such as injection and mold wall temperatures, packing pressure, and the clearance of a gas vent. On the other hand, we measure the amount of flash generated in the molding of poly(phenylene sulfide) (PPS) composites containing glass fiber and spherical fillers (CaCO₃ or Al₂O₃). Flash reduces with decreasing size of spherical fillers. These experimental data are successfully interpreted using the flash model. Polym. Eng. Sci., 45:198–206, 2005. © 2005 Society of Plastics Engineers     

A flow simulation for the epoxy casting process using a 3D finite‐element method

A three‐dimensional flow simulation for epoxy casting has been developed. A control‐volume‐based finite‐element method is employed, containing a conservative upwind formulation for the advection terms and equal order interpolations for all variables. This simulation predicts the non‐isothermal and reactive flow behavior under the gravity. The viscosity and reaction‐rate parameters were estimated by using a dynamic rheometer and a differential scanning calorimeter. The predicted flow front advancement and temperature profiles in the calculation domain similar to the mold cavity were in close agreement with the corresponding experimental results. The variation of epoxy surface configuration with flow rate also showed the same tendency between the prediction and the experiment. This simulation seems to be applicable not only to the epoxy casting, but also to other molding processes of various thermoset resins. POLYM. ENG. SCI. 45:364–374, 2005. © 2005 Society of Plastics Engineers.     

Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Hinokitiol induces differentiation of teratocarcinoma F9 cells

Hinokitiol, a constituent of the wood of Chamaecyparis taiwanensis, was found to induce differentiation of teratocarcinoma F9 cells. When examined by the agar-overlay method, in which expression of plasminogen activator as a differentiation marker protein was detected, this compound exhibited a dose- and time-dependent induction. Induction of differentiation by hinokitiol occurred irreversibly and required its addition for more than 12h. Among its structure-related compounds tested, tropolone and two colchicine-related compounds exerted potent activities comparable to that of hinokitiol. These findings indicate that free tropolone structure in the molecules plays an essential role in inducing differentiation of F9 cells. Hinokitiol showed a strong inhibitory effect of DNA synthesis in very early stages of culture, suggesting that this effect may be responsible for triggering differentiation of F9 cells.     

Laser Induced Periodic Structures on Polymer Surfaces

Subhalf micron (0.2 nm) space and amplitude linear periodic structures and an array of dot images are obtained with the Nd:YAG laser irradiation on Kapton polyimide films, poly(ethylene terephthalate) films, spin-coated polyimide films and others. Different from the excimer laser irradiation, which requires a polarizer, our solid state Nd:YAG laser source provides polarized beams without a polarizer with advantage over excimer laser irradiation. AFM and SEM studies have been carried out. XPS studies of laser exposed areas indicate no significant chemical reactions took place on exposed areas.