Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Hydrogenases, accessory genes and the regulation of [NiFe] hydrogenase biosynthesis in Thiocapsa roseopersicina

The purple (Sulphur) phototrophic bacterium, Thiocapsa roseopersicina BBS contains several [NiFe] hydrogenases, of which two are membrane bound. Mutant T. roseopersicina cells, carrying deletions in both gene clusters showed hydrogenase activity. This activity was located in the cytoplasm. The structural gene cluster hoxEFUYH was identified and sequenced. In addition, genes homologous to hupUV/hoxBC, the hydrogen sensing hydrogenase have been identified and sequenced.Regulation of hydrogenase biosynthesis was studied in detail for HydSL (renamed HynSL). A random mutagenesis system was optimised for T. roseopersicina. One of the mutations was in a gene similar to that coding for the HypF proteins in other organisms. Inactivation of the hypF gene resulted in a 60-fold increase in hydrogen evolution under nitrogen fixing conditions. In addition to hypF, the following accessory genes were identified: hydD, hupK, hypC1, hypC2, hypDE. Characterisation of the corresponding gene products and search for additional accessory genes are in progress.     

A line clipping algorithm and its analysis

One of the classical problems of Computer Graphics: line clipping against a rectangle is revisited. Coordinate raster refinement and some unusual forms of the parametric equation of the line are used to develop formulae for a line clipping algorithm. The algorithm is first presented in a form, where clarity of presentation is the prime concern. It is then transformed into one big nested branch, which after optimisation is assumed to be the most efficient form with a heavy cost on size. It is assumed that any mathematical consideration of the clipping problem would after a similar optimisation lead to a branching structure of equal complexity and speed. Line clipping thus belongs to the class of problems for which after a proper mathematical and logical analysis automatic program transformations may do the rest. This work has been supported by a grant from the Hungarian Academy of Sciences, Project No. OTKA 2572/1991     

Detection of human papillomavirus gene sequences in laryngeal tumors and premalignant changes by polymerase chain reaction

Human papillomavirus gene sequences have been detected in a number of malignant and benign tumours. Non-oncogenic types 6 and 11 are etiological factors of benign mucosal tumours. Types 16 and 18 can be detected in malignancies most often but their role in the etiopathogenesis of cancers is still unclear. In our study we examined formalin-fixed and paraffin-embedded archive laryngeal tissues containing squamous cell carcinoma, papilloma and precancerous lesions for the presence of human papillomavirus genes. As a control we also examined tissues harbouring laryngeal nodules which represented the normal larynx in our study. After DNA preparation from the paraffin blocks we performed polymerase chain reaction to detect the DNA of human papillomavirus types 6, 11, 16 and 18. In the squamous cell carcinomas, papillomas and precancerous lesions the presence of human papillomavirus gene sequences was significantly higher than in the control group. To verify the integrity of DNA we also amplified a sequence deriving from the cellular beta-globin gene. Based on the 100% positivity for this gene we declare that the combination of our DNA preparation and polymerase chain reaction is a reliable method for detecting DNA sequences from formalin-fixed and paraffin-embedded tissues.     

Realization strategies of dedicated path protection: A bandwidth cost perspective

Communication networks have to provide a high level of availability and instantaneous recovery after failures in order to ensure sufficient survivability for mission-critical services. Currently, dedicated path protection (or 1 + 1) is implemented in backbone networks to provide the necessary resilience and instantaneous recovery against single link failures with remarkable simplicity. However, in order to satisfy strict availability requirements, connections also have to be resilient against Shared Risk Link Group (SRLG) failures. In addition, switching matrix reconfigurations have to be avoided after a failure in order to guarantee instantaneous recovery. For this purpose, there are several possible realization strategies improving the characteristics of traditional 1 + 1 path protection by lowering reserved bandwidth while conserving all its favorable properties. These methods either utilize diversity coding, network coding, or generalize the disjoint-path constraint of 1 + 1.In this paper, we consider the cost aspect of the traditional and the alternative 1 + 1 realization strategies. We evaluate the bandwidth cost of different schemes both analytically and empirically in realistic network topologies. As the more complex realizations lead to NP-complete problems even in the single link failure case, we propose both Integer Linear Programming (ILP) based optimal methods, as well as heuristic and meta-heuristic approaches to solve them. Our findings provide a tool and guidelines for service providers for selecting the path protection method with the lowest bandwidth cost for their network corresponding to a given level of reliability.     

The δ-Al2O3 (Saffil) fibre degradation during infiltration with MgLi alloy

The chemical and phase transformations of -Al₂O₃ (Saffil) fibres during their infiltration with Mg-8 wt% Li were studied by scanning and transmission electron microscopy, Auger electron spectroscopy, secondary ion mass spectrometry and X-ray diffraction methods. The infiltration experiments were carried out in autoclave under argon pressure at temperatures of 883–908 K and contact times of 4–30 s as well as at 918 K/420 s. During the course of infiltration, lithium penetrates the Saffil fibres and this process is accompanied by the gradual transformation of the tetragonal -Al₂O₃ lattice towards the cubic spinel LiAl₅O₈ compound, where part of the Li⁺ ions is probably substituted by Mg²⁺ No remarkable interfacial zone at the fibre/matrix interface was observed; however, the Saffil fibres became brittle which had been manifested by the occurrence of fragmentation on the metallographically treated fibre cross-sections. The tensile strength (maximum 220 MPa) of the corresponding metal matrix composite clearly decreased with increased infiltration time.     

Comparison of some components of pigs kept in natural (free-range) and large-scale conditions

A new pig genotype of Hungarian Large White (75%) × Mangalica (pig with curly bristles, 25%) was used in the experiments. The experimental group was kept in a farming system under strictly natural circumstances until a body weight of 120 kg was attained. Neither antibiotics nor yield-increasing hormones were given to this group. The control group was kept in the usual large-scale farming conditions until body weight of 120 kg was attained. In most cases, protein, zinc, and copper levels and, in some cases, iron levels were significantly higher in some major cuts (neck-end (Boston-butt), loin, ham) of the 'free-range' pigs (n = 12) in comparison with the control animals kept in large-scale farming conditions. There was, on average, 15% less cholesterol in the muscles and 30% less cholesterol in the liver and less linoleic acid in all tissues of 'free-range' pigs than in the control group. There was less fat, but the amount of thiamin and riboflavin in the liver of the naturally kept pigs was twice that in the controls. In respect of TBA-reactive compounds, there were no significant differences between the two groups, but superoxide dismutase (SOD) showed significantly higher activities in all cuts from pigs kept in a large-scale farming system. This may be the effect of a higher level of linoleic acid in the fat.     

Training parsers by inverse reinforcement learning

One major idea in structured prediction is to assume that the predictor computes its output by finding the maximum of a score function. The training of such a predictor can then be cast as the problem of finding weights of the score function so that the output of the predictor on the inputs matches the corresponding structured labels on the training set. A similar problem is studied in inverse reinforcement learning (IRL) where one is given an environment and a set of trajectories and the problem is to find a reward function such that an agent acting optimally with respect to the reward function would follow trajectories that match those in the training set. In this paper we show how IRL algorithms can be applied to structured prediction, in particular to parser training. We present a number of recent incremental IRL algorithms in a unified framework and map them to parser training algorithms. This allows us to recover some existing parser training algorithms, as well as to obtain a new one. The resulting algorithms are compared in terms of their sensitivity to the choice of various parameters and generalization ability on the Penn Treebank WSJ corpus.     

Retailoring Box Splines to Lattices for Highly Isotropic Volume Representations

3D box splines are defined by convolving a 1D box function with itself along different directions. In volume visualization, box splines are mainly used as reconstruction kernels that are easy to adapt to various sampling lattices, such as the Cartesian Cubic (CC), Body‐Centered Cubic (BCC), and Face‐Centered Cubic (FCC) lattices. The usual way of tailoring a box spline to a specific lattice is to span the box spline by exactly those principal directions that span the lattice itself. However, in this case, the preferred directions of the box spline and the lattice are the same, amplifying the anisotropic effects of each other. This leads to an anisotropic volume representation with strongly preferred directions. Therefore, in this paper, we retailor box splines to lattices such that the sets of vectors that span the box spline and the lattice are disjoint sets. As the preferred directions of the box spline and the lattice compensate each other, a more isotropic volume representation can be achieved. We demonstrate this by comparing different combinations of box splines and lattices concerning their anisotropic behavior in tomographic reconstruction and volume visualization.